Colebrook Bosson Saunders Lima LMA/001/001 User manual

Dissasssembly for Recycling
Instructions for Lima LMA/001/001

Tools Required
TOOLS REQUIRED FOR DISASSEMBLY
Safety Goggles
2.5mm allen
Key
8mm allen Key
Hammer
4mm allen Key
Smalll Screw
Driver
Wrench and
17mm Socket
6mm allen Key
Gloves
(For disassembly of
gripper)

REMOVE FRONT CABLE CLIP
REMOVE TILT HEAD
REMOVE CAPTURED NUT
REMOVE TOP CAP
REMOVE FRONT CABLE CLIP
REMOVE TILT HEAD BUSHES
1.1
3.1
3.3
2.1
3.2
4.1

REMOVE TILT HEAD
REMOVE MID CAP
REMOVE 1ST HALF NUT
REMOVE CABLE CLIP
REMOVE 2ND HALF NUT
4.2
6.1
6.3
5.1
6.4
REMOVE 1ST HALF NUT
6.1

REMOVE MID JOINT
REMOVE MID JOINT WASHER
REMOVE LOWER CAP
REMOVE MID JOINT BUSH
REMOVE LOWER ARM
6.3
6.5
7.1
6.4
7.2
REMOVE 2ND HALF NUT
6.6

REMOVE LOWER ARM
REMOVE GRIPPER COVER
REMOVE GRIPPER COVER
REMOVE GRIPPER BUSH
REMOVE GRPPER SCREWS
7.3
8.2
8.4
8.1
8.5
REMOVE GRIPPER COVER
8.3

REMOVE CASTING
REMOVE GRIPPER MECHANISM
REMOVE NUT
REMOVE 1ST BUTTON
REMOVE GRIPPER SLIDER
8.6
8.2
8.4
8.7
8.5
REMOVE GRIPPER PAD
8.3

REMOVE 2ND BUTTON
REMOVE THUMB SCREW
REMOVE SCREW
REMOVE SPREADER PAD
REMOVE POST CAP
9.1
9.3
9.5
9.2
9 . 6
REMOVE SCREW
9.4

REMOVE RUBBER PAD
REMOVE POST FROM CLAMP REMOVE POST FROM CLAMP
REMOVE POST LOCATOR
9.7
9.9 9.10
9.8