
Maintenance
protect the diaphragm. This also means, of course, that over time they will become contaminated. The only way
to deal with this problem is visual inspection routines that take the driving conditions into account.
Apart from the obvious visual signs of contamination you should look for water in the windscreen. Especially in
cold weather near or below freezing temperatures, water may accumulate and freeze to ice in the windscreen.
Has this happened, the windscreen should probably be discarded.
diaphragm, therefore wet items must be dried between test sessions.
Recommended Inspection and service routines
ººF ººF
Wet roads, high humidity Wet roads, high humidity
Calibration intervals
Inspection intervals
Windscreen Check and clean* for dust Check and clean* for dust
Check and clean* for dust Check for contamination,
Check and clean* for dust Check for contamination,
Check and clean* for dust Check for contamination,
Check and clean* for dust Check for contamination,
*Cleaning: compressed air applied from the inside.
Calibration
result with the factory calibration.
Calibration Adapter.
Warranty and Service
The warranty does not cover damages to the protection grids caused by their intended use in the challenging
conditions in the wheelhouse.