Mobility Sound BTH-600 User manual

1
<Product Descriptions>
•Heavy duty speaker microphone for
MobilitySound’s BT adapter.
•Volume control buttons, and PTT button are
built in
•Features cell phone key to answer incoming
phone call when BTH-600 links to cell phone.
•Embedded 3.5mm jack for external earphone.
Built-in Mini USB for charging.
<Specification>
Type: Bluetooth Speaker Microphone
Operating Temp: -20℃±2℃~ 50℃±2℃
Approx. Weight: 140g
• Fully Qualified Bluetooth v4.0.
• Echo cancellation, noise reduction, Stereo
audio (A2DP audio), also extended features
• High Quality DAC
• 80MHz RISC MCU and 80MIPS Kalimba DSP
• Fast Current (200mA) battery charge
• SBC, MP3, AAC, Fast stream, APTX codec
support
• RoHS compliant
• HSP / HFP / A2DP / AVRCP/ PBAP / SPP / MAP
profile supports
• Speaker Output: 2W
• PTT function: built-in
• Talking Range: Bluetooth class 2, 10 meters
• Display LED: Blue and Red
• DC Input: 5 Vdc (std.)
• DC Current: 25 mA (Average)
• Battery: 700mAH
• Talk Time: 24+ Hours
BTH-600

2
BTH-600

3
BTH-600
BTH-600 State and LED Flashing Pattern
BTH-600 State & Button Press
LED Message
Function
No link/ No paired device
BTH-600 is OFF
No LED
BTH-600 OFF
BTH-600 is OFF; Press Power
button and hold for 3 seconds.
Both Blue & Red LED ON for 1
second
Turn BTH-600 ON
BTH-600 ON; press and hold
power button for 3 seconds
Red LED flashed 3 times then
OFF
Turn BTH-600 OFF
BTH-600 is off; Press and hold
power button for 6 seconds
Red & Blue LED flashes
alternatively
Get BTH-600 into pairing mode
Unpaired or lost link
Blue LED flashes once every 2
seconds
No link, no pair
BTH-600 State & Button Press
LED Message
Function
Link with BT dongle
Stand-By mode
Blue LED flashes 1 time every 6
seconds
Standby
Press PTT button
Red LED lights continuously
while pressing PTT button
Start to talk

4
BTH-600
BTH-600 State and LED Flashing Pattern (continued)
BTH-600 State & Button Press
LED Message
Function
Link with Cell Phone
Stand-By mode
Blue LED flashes 3 times every 3
seconds
Standby
Press PTT button
Nil
No function
There is a cell phone call coming
in
Both of Blue and Red LED flash
twice per second
User will hear the ring tone
Press Talk/END button when call
coming
Blue LED flashes 1 time per
second during talking cell phone
Music will be stopped during the
call, and will be resumed when
call ends
Press volume keys during the call
Nil
Make adjustment of volume
Double press the Talk/End
button under stand-by mode
Nil
Redial last number
Double press Volume up/down
buttons during playing music
Nil
Skip to Next/Previous track
Volume UP
Nil
5 steps in volume adjust. When
reaches the maximum volume, a
beep sound is heard over the
speaker

5
BTH-600
BTH-600 State and LED Flashing Pattern (continued)
BTH-600-AZ State & Button Press
LED Message
Function
Link with Cell Phone
Volume Down
Nil
5 steps in volume adjust. When
reaches the minimum volume, a
short beep is heard over the
speaker and audio is muted

6
BTH-600
Pairing instruction of BTH-600 with wireless adapter
2. Pressing and holding PTT button on
BT dongle when switch on radio
1. You will see 2 Blue flashes per second
after keep holding few seconds on the
button.
The dongle is in pairing mode.
3. Press and keep holding the power
switch for 6 second from cold start
4. When you see LED flashing in a
pattern of RED-BLUE-RED-BLUE,
BTH-600 is in pairing mode.

7
BTH-600
Pairing instruction of BTH-600 with wireless adapter
5. You will see a long BLUE led light for 3
second after pairing successfully
6. Pairing work is completed