Green Audio HDE 18G V2 User manual

HDE 18G V2

HDMI 2.0 with IR over Twisted Pair Extender Set

Ref: 210515

GREEN AUDIO MANUFACTURING

SAVE TIME. HELP THE PLANET.

User Manual

Why Green Audio?

It’s simple stuff. After more than 20 years in the consumer electronics industry, we wondered if there were

more efficient ways to deliver the products most people use.

Green Audio was founded in 2016 with an eye toward reduced environmental impact and labour

efficiencies. We’ve developed a growing line of products to help you enjoy your leisure time at home with

minimal impact on our planet.

Our mandate is to significantly reduce environmental impact by delivering commonly used consumer

electronics products in smarter bulk packaging. We start by reducing the overall footprint of our

packages. Smaller and lighter, our packages consume less non-renewable resources to produce and

transport. If you’re going to use more than one of something, why buy them individually? Bulk packaging

reduces overall size by up to 50%.

We go further by eliminating plastic packaging altogether and by printing single colour on plain cardboard

(as opposed to retail “beauty boxes”). And we only include essential items with our products, i.e., there’s

no frivolous material inside.

Next, we make our packages easy to open, reducing installation time and saving you money. They’re also

designed to be reusable.

Finally, our “waste” is 100% recyclable cardboard. It’s easy to recycle and less likely to end up in a landfill.

Fortunately, this doesn’t require compromising quality or performance. We access the same factories and

designs as our competition, delivering competitively priced products of high value. We just like to think

we do it in a more caring way.

Save time. Help the planet. Thanks for being Green.

HDE 18G V2

The Green Audio HDE 18G V2 extender kit transmits

4K60 4:4:4 HDMI and IR up to 40m (131ft.) and 1080p

HDMI and IR up to 70m (230ft.) over a single twisted

pair cable. The kit only requires power on either the

transmitter or receiver and support EDID and CEC pass-

through.

Technical Specifications

Transmitter Input

(1) female type-A HDMI

Transmitter Output

(1) female RJ45 (HDBaseT)

Transmitter Control

(2) 3.5mm mini jacks (IR)

Receiver Input

(1) female RJ45 (HDBaseT)

Receiver Output

(1) female type-A HDMI

Receiver Control

(2) 3.5mm mini jacks (IR)

Max Video Resolution

4K60 4:4:4 HDR

Transmission Mode

HDBaseT

Transmission Distance

4K60 4:4:4 HDR: 40m / 131ft.

1080p: 70m / 230ft.

HDMI Version

2.0

HDCP Version

2.2

Bandwidth

18Gbps

Power Consumption

11.2W (Max)

Operating Temperature

-10℃ ~ +55℃

Storage Temperature

-25℃ ~ +70℃

Relative Humidity

10%-90%

Input Power (Power Supply)

Input Power: 24V DC 1.25A, 100~240VAC, 50/60Hz

Dimension (W*H*D)

74mm x 24mm x 120mm

Net Weight (g)

Tx: 200g, Rx:210g

Preface

Read this user manual carefully before using this product. Pictures shown in this manual are for reference

only; the actual product may vary.

This manual is intended for operation instruction only and should not be used for any maintenance or repair.

Trademarks

The product model and logo are trademarked. Any other trademarks mentioned in this manual are

acknowledged as the properties of the trademark owner. No part of this publication may be copied or

reproduced without prior written consent.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. It has been tested

and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Operation of this equipment in a residential area is likely to cause interference, in which case the user at their

own expense will be required to take whatever measures may be necessary to correct the interference.

This manual is only intended to provide installation and operation instruction. It is not intended for any

maintenance or repair.

Safety Precautions

To ensure proper operation, please read all instructions carefully before using this device. Please save this

manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future

shipment or repair.

• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.

• Do not dismantle the housing or modify the module. It may result in electrical shock or burn and will

void your warranty.

• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or

malfunction.

• Refer all servicing to qualified service personnel.

• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near

water.

• Do not remove the housing of the device, as opening or removing the housing may expose you to

dangerous voltage or other hazards.

• Install the device in a place with adequate ventilation to avoid damage caused by overheating.

• Keep the device away from liquids.

• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the device immediately.

• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

• Unplug the power cord when left unused for a long period of time.

• If disposing of the unit, do not burn or mix with general household waste. The device must be disposed

of per local regulations for electronic recycling.

Unpackaging & Pre-Installation

Package Contents

This package contains the following components and accessories:

• 1x transmitter

• 1x receiver

• 1x power supply

• 2x mounting ears

Please Recycle

After installation please recycle any unused packaging.

Panel Descriptions

Transmitter

No.

Name

Description

①

HDMI IN

Type-A HDMI port to connect the source device

②

IR IN

3.5mm jack to connect an IR receiver (not included)

IR OUT

3.5mm jack to connect an IR emitter (not included)

③

DC 24V

DC barrel connector to connect the AC power adapter

④

Power LED

Illuminates green when the unit is powered on

⑤

HDBT OUT

RJ45 connector for a twisted pair cable to connect the transmitter and the receiver

• the LINK LED illuminates when there is a valid HDBaseT link between the

transmitter and the receiver

• the HDCP LED illuminates when the video contains HDCP content

Receiver

No.

Name

Description

①

HDMI IN

Type-A HDMI port to connect the source device

②

IR IN

3.5mm jack to connect an IR receiver (not included)

IR OUT

3.5mm jack to connect an IR emitter (not included)

③

DC 24V

DC barrel connector to connect the AC power adapter

④

Power LED

Illuminates green when the unit is powered on

⑤

HDBT OUT

RJ45 connector for a twisted pair cable to connect the transmitter and the receiver

• the LINK LED illuminates when there is a valid HDBaseT link between the

transmitter and the receiver

• the HDCP LED illuminates when the video contains HDCP content

Installation

1. Connect an HDMI source (such as a set top box) to the HDMI IN port of the transmitter with an HDMI

cable.

2. Connect HDBT OUT port of the transmitter to HDBT IN port of the receiver using a twisted pair cable.

3. Connect an HDMI display to HDMI OUT port of the receiver with an HDMI cable.

4. If IR control is required, perform the following:

Connect the IR emitter to the IR OUT port on either the transmitter or receiver.

Connect the IR receiver to the IR IN port on either the transmitter or receiver.

5. Connect the power adaptor to the power port of the transmitter or receiver. The other device is

powered via the twisted pair connection and does not require a separate power supply.

Typical System Diagram

Green Audio HDE 18G V2 User manual

Popular Extender manuals by other brands