Green Brook KingShield HDPLE1000 User manual

Issue no: 702776
Instruction Manual
Low Energy 1000W Han Dryer
Mo el: HDPLE1000
IMPORTANT INFORMATION
OPERATION
Please read the in ormation contained in these instructions care ully. It provides important advice regarding
the sa e installation, use and maintenance o the unit. These instructions should be kept in a sa e place and
passed on to the new owner should the unit be resold.
Th manufactur r will acc pt no liability or damag r sulting from failur to obs rv th
following:
• Any damage to the hand-dryer on delivery should be reported to the supplier be ore the unit is
connected.
• To ensure the sa e operation o the hand-dryer, it should only be installed and connected by a trained
electrician in accordance with the instructions contained in this booklet and current regulations.
• The hand-dryer should only be used or the purpose or which it is intended.
1. Place your hands to a distance o approx. 12cm under
the air outlet and move them a little. The in rared-
sensor recognises the hand movement and the
hand dryer turns on.
2. Rub your hands against one another. As soon as the
hands are dried su iciently remove them rom the air
current. The hand dryer turns o automatically a ter a
short time.
3. The hand dryer is itted with an integrated time
switch. I the hand dryer is used constantly or more
than 1minute, then the unit turns o automatically.
However, it can immediately be turned on i necessary.
This eature prevents the hand dryer being turned on
or a long period.
CLEANING & MAINTENANCE
Always switch o at the mains be ore any cleaning or maintenance. I repairs or other works are to be
carried out these should be carried out by a ully quali ied electrician.
1. The housing can be wiped with a so t and lightly moist cloth or sponge and i necessary, with some
mild cleaning solution.
2. Clean the lenses o the in rared-sensors at regular intervals, or this purpose use a clean so t dry cloth.
3. The hand dryer must undergo a thorough cleaning every 3months or more requent as usage dictates.
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
[e-mail]
W W W. G R E E N B R O O K . C O . U K
TECHNICAL INFORMATION
Rated voltage: 230V AC - 50Hz
Power Consumption by
Dual Switch: 500W/1000W
IP Rating: IP21
Sa ety Class: 2
Dimensions: 240W x 230H x 170D (mm)
Weight: 3.44g
• Thank you or purchasing our HDPLE1000 Low Energy Automatic Hand Dryer
• Please read this instruction manual care ully and keep or uture re erence.
In rared-Sensor
12 cm
Dia.4

USAGE
INSTALLATION INSTRUCTIONS
The hand-dryer is intended to be a ixed to a vertical wall in industrial and commercial areas and to be
used exclusively or drying hands. The electrician should determine the suitability o area to it.
Always ensure that the installation con orms to the current edition o the wiring regulations, BS 7671 (UK) or
the appropriate standards in your country.
Ensure that the unit is separately used with a 5A use, we recommend connecting to a RCD double pole spur
unit (similar to a PowerBreaker H92 model).
Care should be taken that single insulated conductors cannot come into contact with the mounting
sur ace.
SAFETY PRECAUTIONS
1. Read all the instructions care ully be ore using the appliance.
2. Remove the packages and ensure that the appliance is undamaged.
In case o doubt do not use the appliance and contact your supplier.
3. Do not install the automatic hand dryer on wooden or plastic walls.
4. Do not install the appliance within range o people using baths or showers.
5. Be ore installing the unit, check that the electrical voltage o your main supply corresponds to the voltage
marked on the rating label o the appliance.
6. Be ore installing the appliance, check that there are no obstructions within 50cm o the sensor.
7. Be ore maintenance or repair, make sure that the unit is disconnected.
8. Do not insert any objects into the appliance.
9. Prevent water rom getting into the housing o the appliance during operation or in storage.
Hazard o electric shock, always store in dry area with no moisture.
10. Do not use outdoors.
11. The appliance is not intended or use by young children or in irm persons without supervision.
Description of parts:-
1. Cover
2. Air Outlet
3. Infrared-sensor
4. Power Cable
3
4
2
1
1. Remove all packaging materials care ully.
2. Check or service pipes and cables in the wall be ore drilling.
3. Drill our holes with a diameter o 6mm where the unit is to be installed, according to the dimension
sketch as shown in Dia.1, and insert wall plugs.
4. A distance o at least 200mm to the next wall (or other solid objects) must be kept or servicing to both
sides.
5. A distance o at least 800mm below the hand dryer must be kept clear rom any radiators, wash basins
etc located below the unit.
6. Follow the suggested assembly heights. The assembly height is measured rom the upper assembly
holes to the loor and is determined as ollowing:-
a) 1.5 metres above loor or normal use.
b) 800mm distance above shelves, sinks or radiators.
7. Unscrew both the screws on the ront side o the hand dryer and detach the cover (1) by tilting it
upwards (Dia.3).
AFTER INSTALLATION OR SERVICING, UNITS MUST BE CHECKED AND ONLY LEFT
WHEN ELECTRICALLY AND MECHANICALLY SAFE.
The hand dryer must not be installed within range o people using baths and/or showers.
Dia.2
212mm
157mm
Dia.1
min.
800mm
min.
200mm
8. Fix the hand dryer with the 4enclosed screws to the
holes. It can be help ul to use lat washers or assembly,
to achieve a clean and secured assembly. Please keep in
mind that the assembly area must be even and clean.
9. Using the miniature slide switch on the ront o the an
housing, set the switch to ‘Cool’ (500W) or ‘Heat’
(1000W).
10. Replace the cover by positioning the cover (1) at irst
below the air outlet (2). Now place the cover over the
hand dryer and push or draw the upper edge o the cover
with both the retaining collars as ar as the retaining
base, until the cover latches.
11. The hand dryer should be connected to the mains supply
via a used spur unit. Dia.3