GREENTANK SURGE PUSH User manual

For more tips & safety information, please visit
greentanktech.com/surgepushsafety
USER INSTRUCTIONS
SURGE PUSH
USAG E
Charge battery before use.
Turn 510 threaded cartridge clockwise onto battery.
DO NOT overtighten.
Push button rapidly 5X to turn ON/OFF. (Note: LED
light will flash when battery is turned
ON/OFF).
Push button rapidly 3X to alternate between 3 heat
settings. (White: Low .V, Blue: Medium .V, Red:
High .V)
Pre-heating - Push button rapidly 2X (Note: LED light
will change colours). Push button 1X to quit
pre-heating.
When ready to use, press and hold the button and
inhale through the mouthpiece.
Remove cartridge & turn off battery when not in use.
CHARGING
Turn battery clockwise into the USB charger
provided.
DO NOT use other USB chargers.
DO NOT overtighten.
USB indicator light: Red = charging, Green = charged.
STORAGE CONDITIONS
Store in a cool, dry place between 4 - 30˚C (39 -
86˚F).
TROUBLESHOOTING
Cartridge Connectivity Issue -
Remove cartridge and reattach lightly.
Low Battery Indication - LED will flash 10X.
Restricted Airflow - Preheat for 5 seconds before
vaping.

VAPING TIPS
Start low and go slow. Everyone has a different
tolerance level, and it may take a few tries to find
the perfect amount for you.
Take 1 or 2 draws from your vape and wait
20-30 minutes. It may take time to notice the
full effects of your product.
Use responsibly. Never operate a motor vehicle
while impaired.
CAUTION
Battery is NOT waterproof.
DO NOT expose battery to direct sunlight.
DO NOT expose battery to
freezing temperatures.
DO NOT tamper with battery.