Storz & Bickel GMBH Crafty User manual

STORZ & BICKEL GMBH & C O. K G
INSTRUCTIONS FOR USE
Read carefully before using the device
and save these instructions.

3
Table of Contents ......................................................................Page
1. Product Overview, Scope of Delivery ............................................... 4
2. Explanation of Symbols, Safety Recommendations......................... 6
3. Intended Use .................................................................................... 10
4. Overview of Plants........................................................................... 11
5. Factors influencing Vaporization ..................................................... 12
6. The CRAFTY Vaporizer.................................................................... 12
7. Commissioning and Operation........................................................ 15
7.1. Charging the Battery .............................................................. 15
7.2. Heating Up.............................................................................. 17
7.3. Temperature Setting............................................................... 17
7.4. Reset to Default Settings ....................................................... 17
8. Filling the Filling Chamber ............................................................... 18
8.1. Filling Aid................................................................................ 19
8.2. Filling the Filling Chamber Using the Filling Aid................... 20
9. Application........................................................................................ 21
10. Disassembling, Cleaning and Assembling...................................... 22
10.1. Disassembling and Reassembling
the CRAFTY Cooling Unit.................................................... 23
10.2. Cleaning the CRAFTY Cooling Unit .................................... 25
10.3. Removal of the Lower Filling Chamber Screen .................. 25
11. CRAFTY App.................................................................................... 26
11.1. Default Settings ................................................................... 26
11.2. Connecting the CRAFTY Vaporizer with a Smartphone..... 26
11.3. The Menu Items of the CRAFTY App.................................. 27
11.4. Setting Temperature with the CRAFTY App ....................... 28
11.5. Further Individual Settings .................................................. 29
11.6. Menu Items for Device and Information .............................. 30
12. Technical Specifications .................................................................. 31
13. CE Declaration of Conformity .......................................................... 31
14. Warranty, Liability, Repair Service .................................................. 32
INSTRUCTIONS FOR USE

Type Label
(on the underside)
Charging Socket
(behind the Filling
Chamber Tool)
Filling Chamber Tool
ON/OFF Switch
LED-Display
Filling Chamber
Mouthpiece
Cooling Unit
CRAFTY Vaporizer functional elements:
Dosing Capsule
54
1. PRODUCT OVERVIEW CRAFTY VAPORIZER1. PRODUCT OVERVIEW CRAFTY VAPORIZER
Power
Adapter with
USB Cable
Herb Mill
Filling AidCleaning Brush
3 pcs. Spare Screens
1 Set of Spare
Seal Rings (one
Seal Ring each)
CRAFTY
Vaporizer
Instructions
for Use
Scope of Delivery:
Liquid Pad
(optional accessory: 12 Volt Car Charger)
Please check whether all components have been included. If not, please inform the
Storz & Bickel Service Center.
In the case of technical problems, questions about the device, repairs, warranty claims
and disposal of the device, customers in the US and Canada should contact the fol-
lowing address:
Storz & Bickel America, Inc. · 1078 60th Street, Suite A · Oakland, CA 94608
All other customers should contact this address:
Storz & Bickel GmbH & Co. KG · In Grubenäcker 5-9 · 78532 Tuttlingen, Germany

76
Explanation of Symbols
Please follow these instructions carefully!
Safety recommendations!
In order to avoid injuries to persons and damage to the equipment,
it is mandatory to observe instructions marked with this symbol.
Note/Tip!
This symbol always gives you technical information or useful tips
regarding the Vaporizer.
EU conformity symbol:
The manufacturer confirms with this symbol the compliance of the
product with the applicable European directives and standards.
The device was introduced after 13 August 2005. It may not be
disposed of in normal household waste.The X on the trash can
indicates the necessity of disposing of this device separately. The
device contains a built-in rechargeable lithium-ion battery that
must be discharged before disposal.
Symbol for the manufacturer - the manufacturer‘s name and
address are next to the symbol
Safety Category II device
DC (direct current)
Nationally Recognized Testing Laboratory:
additional requirements of UL 499 and CAN/CSA-C22.2 No. 64
have been tested on the basis of EN 60335-1.
Safety tested and production monitored by TUEV SUED Germany
Caution! Hot surfaces!
Do not touch metal parts!
Keep away from sunlight.
Protect against moisture and humidity.
UL Recognized Component Mark: This symbol indicates that the
corresponding devices are listed by UL.
UL - Underwriters Laboratories: This symbol indicates that the
corresponding devices are listed by UL.
Restriction on the use of certain hazardous substances in
electrical and electronic equipment
Symbol for FCC declaration of conformity
(electromagnetic interference approval in the USA)
Efficiency Level 5
Efficiency of power adapter
2. SAFETY RECOMMENDATIONS 2. SAFETY RECOMMENDATIONS
Read the following safety
recommendations thor-
oughly and carefully before
using the device.
These Instructions for Use are a
significant part of the Vaporizer
and power adapter and must be
provided to the user.
The instructions given in these In-
structions for Use must be strictly
observed as they are extremely
important to ensure safety during
installation, use and maintenance
of the Vaporizer and power adapter.
Please keep this brochure in a safe
place for future reference.
You may download the current In-
structions for Use for the CRAFTY
on www.storz-bickel.com.
The following symbols relate to the power adapter:

98
2. SAFETY RECOMMENDATIONS 2. SAFETY RECOMMENDATIONS
Safety Recommendations
The packaging material (plastic
bags, boxes etc.) must be kept out
of the reach of children as it is a
potential source of danger.
People who require assistance must
be supervised constantly during ap-
plictaion. Such persons often under-
estimate the hazards involved (e.g.
strangulation with the USB cable of
the power adapter), so resulting in
injury.
The device contains small parts
which can block the respiratory tract
and lead to choking. Therefore,
make sure that you always keep the
Vaporizer and accessories out of the
reach of babies and infants.
When charging the battery, only use
the power adapter supplied with the
Vaporizer or the 12 Volt car charger
available as an accessory from
Storz & Bickel. The use of products
from other sources can damage the
battery.
If you have any concerns, ask a
specialist to check whether the
electrical system is in accordance
with the local safety regulations.
If there are any problems during
operation, immediately pull out the
power adapter from the socket.
The USB cable of the power adapter
must be unwound over its entire
length (avoid rolling up and laying
the coils over each other). It must
not be exposed to any impacts and
must be kept out of the reach of
children. Also, it must not be kept
near liquids or sources of heat
and must not be damaged. Do not
wind the USB cable of the power
adapter tightly, nor pull it over sharp
edges and never crush or kink it. If
the mains USB cable is damaged,
please contact our Service Center
to have it replaced. Never try to
repair a power adapter USB cable
yourself!
The use of multiple sockets and/or
extension cables is not recommend-
ed. However, if this is absolutely
necessary, only products with a
quality certificate (such as UL, IMQ,
VDE, +S etc.) may be used, pro-
vided the specified power exceeds
the power required (A=Ampere) by
the devices that are connected.
After use, the Vaporizer must be
placed on a stable, flat surface. To
be used only at a sufficient distance
away from heat sources (ovens,
stoves, fireplaces), and in locations
where the ambient temperature can-
not drop below +5°C (+41°F). Store
the Vaporizer and power adapter in
a dry place protected against the ef-
fects of weather and out of the reach
of children or unqualified persons.
It cannot be used in damp locations
(such as bathrooms etc.).
Do not operate the Vaporizer close
to flammable objects such as cur-
tains, tablecloths, or paper.
Keep the Vaporizer and power
adapter away from pets (e.g.
hamsters, mice) and other animals
which could damage the insulation
of the power adapter USB cable.
The Vaporizer and power adapter
may only be repaired by our Service
Center. Incorrectly performed
repairs without the use of original
spare parts can prove dangerous to
the user.
Danger to life when opening the
power adapter as live components
and connections are exposed.
The Vaporizer must never be
repaired or transported when the
power adapter is plugged in.
The Vaporizer and power adapter
must never be operated when the
power adapter USB cable is faulty.
Do not put any objects into the
openings of the device.
Do not leave the Vaporizer unat-
tended while it is being operated.
After use, switch off the heater.
The ventilation slots and the hot air
outlet of the Vaporizer may not be
closed, obstructed, or blocked while
the device is being used, nor while it
is cooling down.
Caution! Hot surfaces!
The Filling Chamber is made of
metal; do not touch it when it is hot.
Before cleaning, disconnect the
power adapter from the socket. The
Vaporizer and the power adapter
should be cleaned only with a dry
cloth - or a damp cloth if absolutely
necessary. Never immerse the Va-
porizer or the power adapter in water
or any other liquid, nor clean it with
direct jets of water or steam.
The Vaporizer and the power adapter
must not be used in damp or wet
conditions.
Do not expose the Vaporizer or the
power adapter to rain. Do not use in
the bathroom or above water.
The China Compulsory Certificate (CCC) is a certification system
that applies in China.
The lightning flash with arrowhead symbol within an equilateral
triangle alerts the user to the presence of uninsulated, dangerous
voltage within the system enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock.
Equipment with this symbol may only be used in the house (dry
surroundings).

1110
The manufacturer is not re-
sponsible for any damage
or personal injury caused
by inappropriate, incorrect or irre-
sponsible use.
Never touch the Vaporizer or power
adapter with wet or damp parts of the
body.
Never operate the Vaporizer or
power adapter when it is wet or
damp. If the Vaporizer or the power
adapter gets wet, it must be checked
by our Service Center for damage to
electrical components.
Do not use in an atmosphere with
risk of explosion or ignition.
Never allow the Vaporizer or the
power adapter to be used by children
or unqualified persons.
Only use original Storz & Bickel ac-
cessories and spare parts.
2. SAFETY RECOMMENDATIONS
3. INTENDED USE
The CRAFTY Vaporizer releases fra-
grances or aromas from the herbs
and other plant materials listed below.
These aromatic substances are re-
leased through vaporization by heated
air, and may be directly inhaled.
The device may only be used with the
recommended vaporizing media. The
use of other substances can present
a health risk.
The CRAFTY Vaporizer is not intend-
ed for medical/therapeutic purposes.
4. OVERVIEW OF PLANTS
Portion of the Temperature-
Plant name Botanical name plant used setting
Eucalyptus Eucalyptus globulus the leaves 130°C (266°F)
Hops Humulus lupulus the cones 154°C (309°F)
Chamomile Matriarca chamomilla the blossoms 190°C (374°F)
Lavender Lavandula angustifolia the blossoms 130°C (266°F)
Lemon balm Melissa officinalis the leaves 142°C (288°F)
Sage Salvia officinalis the leaves 190°C (374°F)
Thyme Thymus vulgaris the herb 190°C (374°F)
Below is an overview of the plants that
are suitable for vaporization in the
CRAFTY Vaporizer.
The aromas and fragrances from the
plant materials listed below may be
vaporized.*
Any other use is inappropriate and po-
tentially dangerous.
Information and up to date news
about plants suitable for vaporization
will be published on www.storz-bick-
el.com.
It is important to observe the following
instructions in order to set the CRAFTY
Vaporizer with the plant material in the
best possible way for your personal re-
quirements.
*This statement has not been evalu-
ated by the FDA. The CRAFTY Vapor-
izer is not a medical device and is not
intended to diagnose, treat, cure or
prevent any disease.
WARNING:
Please consult your doctor
or pharmacist if you have any
medical concerns. It is possible that
some plants may cause allergic reac-
tions for the user. If this occurs, it is
urgently recommended to refrain from
further use of such plants.
Only use the plant parts which are
found in this list and which have been
verified according to the regulations
of the European or any other pharma-
copoeia with regard to genuineness,
purity and pathogenic germs. You can
purchase such plants or plant parts in
pharmacies.*

1312
6. THE CRAFTY VAPORIZER
The amount of aromas and fragrances
released can be influenced by the fol-
lowing factors:
1. Quality: The amount of aroma or
fragrance contained in the respec-
tive plant material that can be va-
porized.
2. Quantity: The amount of vaporiza-
tion material in the Filling Cham-
ber.
3. Surface: The finer the plant is
ground, the greater the surface
and the more aromas and fra-
grances can be released during
the vaporization cycle.
4. Temperature: The higher the tem-
peratures, the more aromas and
fragrances will be released at
once.
Please note: Increasing the tempera-
ture should be the last resort, because
plant material tastes more roasted
when using higher temperature.
Since the plant ingredients are re-
leased in a gentle manner, the vapori-
zation cycle may be repeated with the
same contents in the Filling Chamber.
Depending on the four factors de-
scribed above, the Filling Chamber
contents may be reused multiple
times until the aromas and fragrances
are released completely.
If no more vapor is produced at the
highest temperature, then the vapori-
zation material is completely exhaust-
ed and must be replaced with new
material. However, for the best aroma
results it is advisable to replace the
vaporization material before this
point.
5. FACTORS INFLUENCING VAPORIZATION
6. THE CRAFTY VAPORIZER
Unpacking
The box contains all components as
well as the Instructions for Use. Keep
the Instructions for Use for future ref-
erence.
Remove the Vaporizer and the ac-
cessories from the box. Immediately
after unpacking, check whether the
Vaporizer, the accessories, the power
adapter and the device plug are all in-
cluded in the delivery and work prop-
erly. If you notice any defects, inform
the seller or the delivery agent imme-
diately.
The packing material (plastic
bags, boxes etc.) must be
kept out of the reach of chil-
dren as it is a potential source of dan-
ger.
Please dispose of the packing mate-
rial in a proper and environmentally
friendly manner.
We recommend keeping the original
packaging in case it is required later
(transport, Storz & Bickel Service
Center etc.).
Power Connection
Before connecting up the Vaporizer,
make sure that the information given
on the power adapter type label cor-
responds to the local power supply
voltage.
All parts of the electrical system must
comply with currently applicable offi-
cial regulations.
Place the heated Vaporizer only on a
hard, stable surface, and not on any
soft or heat-sensitive material.
Take care that the power adapter USB
cable cannot be damaged through
kinking, crushing or pulling.
Improper installation may
lead to personal injury or ma-
terial damages, for which the
manufacturer cannot be held respon-
sible.
Application and Operation
This Vaporizer was developed
for vaporizing the plant mate-
rials listed in the plant over-
view. Any other use is inappropriate
and potentially dangerous.
The user should always follow the
instructions listed here for use and
maintenance.
If you have any concerns, or if there
are any problems immediately switch
off the Vaporizer and pull the power
adapter cord, if used, from the sock-
et. Do not try to remedy the defect
yourself. Contact our Service Center
directly.
After using the Vaporizer and power
adapter, allow them to cool down be-
fore placing them in storage.
Storage
Store the Vaporizer and the power
adapter in a dry place protected
against the effects of weather and out
of the reach of children or unqualified
persons.
In Case of Problems
If the power adapter has been in use,
unplug it at the socket and ensure that
no one can connect the Vaporizer to
the mains supply again without this
being noticed.
Before any maintenance work is done,
the Vaporizer has to be switched off
and the power adapter unplugged
from the power supply.
Put the Vaporizer in the original pack-
aging, or pack it properly in other pack-
ing material, and send it to our Service
Center.

1514
If the preceding tips do not
yield the desired results, or for
any other defects or problems
not mentioned here, please unplug the
power adapter and contact our Ser-
vice Center immediately.
Do not open the Vaporizer or
the power adapter! Without
special tools and specialized
knowledge, any attempt to open either
of these devices will cause damage to
them. Such an attempt will invalidate
the warranty claim.
7. COMMISSIONING AND OPERATION6. THE CRAFTY VAPORIZER
Do not leave the device unat-
tended during operation.
Place the CRAFTY Vaporizer
only on a hard, heat-resistant, flat, sta-
ble surface, never on soft surfaces or
flammable material. Check whether
the power supply voltage corresponds
to the voltage rating listed on the pow-
er adapter. The power adapter and
USB cable must be in perfect condi-
tion. Connect the power adapter only
to a properly installed socket.
The manufacturer will not bear any
responsibility whatsoever if this acci-
dent prevention measure is not taken.
Please unplug the power adapter from
the mains socket to completely dis-
connect from the mains power supply.
7.1. Charging the Battery
The battery charge status is signaled
by the blue light on the LED display.
Explanations on the battery display
during the charging operation:
Steady blue light:
the battery is fully charged.
Blue, slow-flashing light: the battery
is between 61 and 96% charged
Blue, rapidly flashing light: the bat-
tery is between 31 and 60% charged
Blue flashing: the battery is up to
30% charged
Explanations of the battery display
following switch off:
Steady blue light: the battery is
between 64 and 100% charged
Blue, slow-flashing: the battery is
between 32 and 64% charged
Blue, rapidly flashing: the battery is
between 1 and 32% charged
Blue flashing: battery is completely
discharged
Check the housings of the Va-
porizer and the power adapt-
er for signs of damage each
time before using or charging. The
Vaporizer may not be charged and
neither Vaporizer nor power adapter
used if these are damaged.
The battery charge of the new product
has a level of up to 80%. Fully charge
before using for the first time.
The charging time for the battery de-
pends on how old it is and how high
the charge is on starting; it takes
about two hours if the battery is com-
pletely discharged.
Connect the USB cable to the charg-
ing socket of the Vaporizer and to the
power adapter. Then plug the power
adapter into a suitable power socket.
Note: When the power adapter is
plugged into the mains, the LED dis-
play lights up in green/red/blue for a
moment and the Vaporizer vibrates
briefly. This serves as a functional
check and indicates that the charging
operation has started.
The LED lights up and starts to flash,
i.e. the battery is being charged. As
soon as the battery is fully charged,
the charge indicator lamp stops flash-
ing and shows a steady blue light.
Do not try to remedy the defect your-
self. Contact our Service Center di-
rectly.
Disposal
If the Vaporizer or the power adapter
is irreparably damaged, please do not
simply throw them away. As they are
made of high quality, completely recy-
clable component parts, they should
be brought to a material recycling
center in your town or sent to our Ser-
vice Center for disposal.
Possible Faults / Troubleshooting
Problem Possible Cause/Remedy
CRAFTY cannot be
switched on.
Please ensure that the CRAFTY’s battery is charged.
If the Vaporizer still does not work, then the device is
faulty. In this case, get in touch immediately with our
Service Center.
The LED display of
CRAFTY flashes alternately
red/blue.
Battery temperature is either too high or too low. Allow
the hot Vaporizer to cool down or the cold Vaporizer to
warm up.
The LED display of
CRAFTY flashes blue.
Battery is completely discharged. Please connect the
charger.
The LED display of
CRAFTY flashes alternately
red/green.
The power adapter or the USB cable is not suitable.
Please use an original Storz & Bickel power adapter and
USB cable or 12 Volt car charger.
The LED display of
CRAFTY flashes alternately
red/orange.
The Vaporizer is faulty. In this case, disconnect from the
mains without delay and get in touch immediately with
our Service Center.

1716
7. COMMISSIONING AND OPERATION7. COMMISSIONING AND OPERATION
Connecting the Vaporizer using the power
adapter or 12 Volt car charger
Once the charging operation is com-
plete, first disconnect the power
adapter from the mains socket and
then unplug from the Vaporizer.
The battery can also be
charged via the optional 12
Volt car charger. Connect the
12 Volt car charger to the power sock-
et of the Vaporizer using the USB ca-
ble and then plug the car adapter into
the socket in the car for the cigarette
lighter, or any other suitable 12 V
socket. Charge and complete the op-
eration in the same way as with the
power adapter (see Section 7.1.
“Charging the Battery”).
Batteries are specially as-
sembled consumable items
that can only be replaced by
Storz & Bickel when the CRAFTY Va-
porizer is sent in to them.
Any attempt by the customer to re-
place the battery by him/herself is
potentially dangerous and leads to
loss of any claims under the warranty
and exempts Storz & Bickel from any
liability.
Mains Operation
The CRAFTY Vaporizer cannot be be
operated with the power adapter if the
battery is completely discharged. The
battery must be first, at least partially,
charged. Proceed as described in 7.1.
“Charging the battery” and then con-
nect up the Vaporizer.
Automatic Switching Off
The automatic switching off is used
to save battery capacity so that the
Vaporizer can be used as long as pos-
sible without charging.
The device switches off automatically
one minute after the last press of a but-
ton or the last application. The switch-
ing off of the Vaporizer is indicated by
a short vibration and by displaying the
charged state.
A short press of the ON/OFF
switch during operation can
reset the automatic switching-
off to one minute.
7.2. Heating Up
The CRAFTY Vaporizer provides two
temperature levels that are set in the
factory: The basic temperature at
180°C (356°F) and the booster tem-
perature at 195°C (383°F).
Both the basic and booster
temperatures can be altered
using a smartphone and the
CRAFTY App (see Section 11.4. “Set-
ting Temperature with the CRAFTY
App”).
Switch on the device (heating up the
Vaporizer with full Filling Chamber
and Cooling Unit mounted is recom-
mended). To do this, press the orange
ON/OFF switch for at least half a sec-
ond. The Vaporizer responds with a
short vibration. The vibration does not
take place if there is a fault.
The LED display indicates the heating
operation up to the basic tempera-
ture by a steady red light. Heating up
the heat exchanger can take up to
two minutes, depending on the tem-
perature setting and battery charge
level. Once the basic temperature is
reached, this is signaled by a short
double vibration and a steady green
light.
If the basic temperature can no longer
provide adequate evaporation, the
booster temperature can be activated
by means of a double-click on the
orange-colored ON/OFF switch. The
LED displays the heating-up opera-
tion for the booster temperature by a
red flashing signal. Once the booster
temperature is reached, this is sig-
naled by a short double vibration and
a green flashing signal.
7.3. Temperature Setting
The levels for the basic and booster
temperatures can be altered with the
aid of a smartphone and the CRAFTY
App. See Section 11. “CRAFTY App”
7.4. Reset to Default Settings
It is possible to reset settings (see
Section 11.1. “Default Settings”) which
were changed using the CRAFTY App.
The reset is made by pressing the ON/
OFF button for ten seconds while the
CRAFTY Vaporizer is switched on.
If the ON/OFF button has been
pressed for ten seconds, the signaling
of the reset is made by the following
running lights sequence: red/green/
blue/red/green/blue/red/green/blue.
The CRAFTY Vaporizer also vibrates
while the lights sequence is running.

1918
Turn the Cooling Unit with a 90° rota-
tion counterclockwise in order to re-
move it from the Vaporizer.
Always fill the Filling Chamber com-
pletely up to the plastic rim with ground
plant material. Do not compress the
Removal of Cooling Unit (with Mouthpiece)
Filling Chamber properly filled
Filling Chamber partially filled, with Liquid
Pad placed on top
plant material too much so that the
airflow is not unnecessarily impeded.
Remove any excess plant material left
around the filling aperture so that it is
clean and allows the Cooling Unit to
be fitted.
If the Filling Chamber is only
partially filled, then the vapori-
zation material may shift
around; the hot air then bypasses the
vaporization material, so that no va-
porization can occur.
If the Filling Chamber is not to be
filled completely, it is recommended
to place the included Liquid Pad over
the herbs, and then mount the Cooling
Unit on the Vaporizer.
Take care that the Screens
are not obstructed with plant
material. To guarantee opti-
mal results, we recommend cleaning
the Screens after each vaporization
cycle with the enclosed Cleaning
Brush.
The upper Screen especially can
become clogged with plant material
and so make inhaling difficult. In this
case, remove the Screen as in Sec-
tion 10. (Disassembling, cleaning and
assembling) and clean or insert a new
Screen.
Then re-mount the Cooling Unit by ro-
tating it clockwise through 90°.
As soon as the lower Filling Chamber
Screen is clogged or shows depos-
its, a cleaning of the Filling Chamber
is needed. For that, please firstly re-
move the lower Screen as described
in chapter 10.3. “Removal of the lower
Filling Chamber Screen” and clean
the Filling Chamber with a cotton
stick that has been soaked in alco-
hol. Please make sure that no alco-
hol drops into the inner of the device.
After cleaning, a new screen is to be
inserted.
8.1. Filling Aid
The Filling Aid supplied with the unit
makes filling the Filling Chamber an
easy and clean operation and serves
as a magazine for transporting and
storing plant material already ground
in the Herb Mill.
To fill the Filling Aid, remove the up-
per cap and fill the bowl incl. plug with
ground plant material. Replace the up-
per cap and close it.
Filled Filling Aid
(upper cap removed)
Upper
Cap
Plug
Lower
Cap
Bowl
8. FILLING THE FILLING CHAMBER 8. FILLING THE FILLING CHAMBER

2120
9. APPLICATION
Using the CRAFTY Vaporizer
8.2. Filling the Filling Chamber
Using the Filling Aid
Remove the Cooling Unit from the Va-
porizer and remove any residues that
may be in the Filling Chamber. The
Filling Chamber Tool can be a help in
doing this.
Remove the lower cap of the Filling Aid
by turning counterclockwise. Place the
Filling Aid on the Vaporizer and attach
by turning it clockwise. Remove the
upper cap from the Filling Aid. Pull the
plug and use it to fill a portion of plant
material through the central opening
into the Filling Chamber.
Make sure that the Filling
Chamber is not overfilled (see
Section 8. “Filling the Filling
Chamber”).
Fill the Filling Aid to the lower rim (see
the two following drawings)!
Overfilling leads to clogging of the
Screens and can make inhaling more
difficult.
Then re-insert the plug into the central
opening and screw on the upper cap of
the Filling Aid. Unscrew the Filling Aid
with a 90° rotation and screw on the
lower cap again. Then re-mount the
Cooling Unit by rotating it clockwise
through 90°.
Mount the Cooling Unit on the Vaporiz-
er and heat up. This ensures that both
the Filling Chamber and the material
to be vaporized are preheated and the
vaporizing can begin as soon as the
heating process is completed.
Caution! Hot surface!
After using the CRAFTY Va-
porizer, do not touch the Fill-
ing Chamber until it has cooled down
again.
Once the Vaporizer has reached the
set temperature (steady green light
for the basic temperature and flash-
ing green for the booster temperature,
each also accompanied by a short
double vibration) and the Mouthpiece
is folded out, then the inhaling process
may begin.
Take the Mouthpiece between the lips,
and inhale slowly and evenly for sev-
eral seconds.
Please note the following about vapor
generation: the more intense the va-
pors, the greater the impairment of the
flavor.
A very high intensity (or den-
sity) of the vapor can lead to
irritation of the respiratory
passages from the concentration of
the aromas and fragrances.
In this case, the temperature should
be lowered, so that the intensity of
the vapors is reduced (see Section
11.4. “Setting Temperature with the
CRAFTY App”).
The device is not to be used, if
the user has respiratory tract
or lung conditions. Depend-
ing on the density, the vapor could ir-
ritate respiratory tracts or lungs,
which can lead to coughing.
Inhale only half the amount of
air you can normally manage.
Hold your breath for a few sec-
onds and exhale slowly. It is advisable
to deliberately concentrate on your
breathing process.
After vaporization, turn off the
CRAFTY Vaporizer. To do this, press
the orange ON/OFF switch for at least
half a second. The Vaporizer acknowl-
edges the switching off with a short
vibration.
Allow the Vaporizer to cool down be-
fore it is packed away.
Filling the Filling Chamber with the Filling Aid
The lower rim of the Filling Aid must be
above the top level of the plant material
8. FILLING THE FILLING CHAMBER

Cap Lock
Mouthpiece
Cooling Unit Cap
Base Seal Ring
(small)
Base Seal Ring
(large)
Upper Screen
(coarse mesh width)
Cooling Unit Base
Mouthpiece Seal Ring
2322
When the vapors are cooled, it is in-
evitable that a small fraction is con-
densed on the internal surfaces of the
Cooling Unit.
The component parts of the Cooling
Unit, including the Mouthpiece must
be thoroughly cleaned on a regular
basis to guarantee proper operation
and pure flavor.
For hygienic reasons, it is also neces-
sary to clean these components when
the Vaporizer is to be used by a differ-
ent person.
The condensate can be
sticky. The Cooling Unit can
be dismantled more easily
when it first warmed up.
Product Overview of the CRAFTY Cooling Unit
The Cooling Unit consists of:
10.1. Disassembling and Reassem-
bling the CRAFTY Cooling Unit
Turn the Cooling Unit with a 90° rota-
tion counterclockwise in order to re-
move it from the Vaporizer.
Pull out the Mouthpiece from the Cool-
ing Unit Cap, rotate slightly back and
forth while doing this, and pull off the
Mouthpiece Seal Ring.
Pulling the Mouthpiece from the Cooling Unit
Cap
Opening the Cap Lock
Open the Cap Lock by pulling it rear-
wards.
Remove the Cap Lock from the cap by
pulling up at one side.
Removal of the Cap Lock
Separate the Cooling Unit Cap from
the Cooling Unit Base by pulling off
the cap upwards.
10. DISASSEMBLING, CLEANING AND ASSEMBLING 10. DISASSEMBLING, CLEANING AND ASSEMBLING
If the Cooling Unit must be im-
mersed into alcohol (ethanol)
the Cap Lock only has to be
removed from the Cooling Unit. Ex-
tended contact with alcohol can lead
to whitening of the Cap Lock Label or
disintegration of the glue.

2524
Pressing out the upper Screen
Reassemble in reverse order.
When assembling, make sure
that Seal Rings are properly
seated. The Mouthpiece Seal
Ring, especially, must sit completely in
the cap and be no longer visible.
The upper Screen must be inserted
carefully into the groove provided.
Disregarding this may allow plant
particles to enter the Cooling Unit, so
blocking this or be inhaled.
Do not immerse any plastic
components for longer than
an hour in alcohol or ethanol.
Extended contact with alcohol or etha-
nol can lead to discoloration or embrit-
tlement of plastic parts.
Before assembling allow all compo-
nent parts to dry properly.
After cleaning, check all component
parts for surface damage, tears, sof-
tening or hardening, impurities, distor-
tion and discoloration and set dam-
aged component parts aside.
Warning! Alcohol (ethanol)
is flammable and may easi-
ly ignite.
Sets of new Cooling Units may
be ordered from www.storz-
bickel.com.
10.3. Removal of the Lower Filling
Chamber Screen
Remove the lower Filling Chamber
Screen out of the Filling Chamber by
using a pair of tweezers or a pair of
pointed pliers. Insert a new Screen
while taking care that the edges of the
Screen seat into the groove at the bot-
tom of the Filling Chamber.
Removal of the large Base Seal Ring
Remove the large and small Base Seal
Rings. Lever out the large Seal Ring
from the recess in the notch using the
Filling Chamber Tool.
Push the upper Screen downwards
out of the Filling Chamber cap from
above by using the Filling Chamber
Tool supplied.
10.2.Cleaning the CRAFTY Cooling
Unit
The Cooling Unit can be disassem-
bled for cleaning purposes and then
assembled again (see Section 10.1.
“Disassembling and Reassembling
the CRAFTY Cooling Unit”).
The Cleaning Brush, cotton swabs and
paper or cotton towels may be used for
cleaning. As solvent, we recommend
alcohol (ethanol) or warm water with
wash-up liquid.
For optimal airflow, please ensure
the Cooling Unit and Mouthpiece are
clean and free from debris blockage.
Manual cleaning of the disassembled
Cooling Unit
10. DISASSEMBLING, CLEANING AND ASSEMBLING 10. DISASSEMBLING, CLEANING AND ASSEMBLING
Pull the Cooling Unit
Cap from the Cooling Unit Base

Temperature
Temperature Settings Device Information
Connecting
Enter the serial number
found on the bottom of your
Crafty (type label)
SN: CY
Save Cancel
Temperature Settings Device Information
Save Cancel
2726
11. CRAFTY APP 11. CRAFTY APP
General
The CRAFTY App is not necessary
for operating the CRAFTY Vaporizer,
does however allow individual set-
tings to be made and allows the read-
out of additional information when the
CRAFTY Vaporizer is in operation.
As the CRAFTY Vaporizer has too little
space for a display, the Vaporizer can
be connected to an iPhone or Android
smartphone via Bluetooth and the
smartphone’s display used.
Minimum requirement for this is
iOS6 for the iPhone or Android 4.3.
The CRAFTY App can be downloaded
from the App Store or Google Play
Store.
11.1. Default Settings
Basic temperature: 180°C (356°F)
Booster temperature:
additional 15°C (27°F)
so corresponding to 195°C (383°F)
LED indicator
brightness CRAFTY: 100%
Charge indicator lamp CRAFTY : ON
Vibration CRAFTY : ON
Vibration smartphone: OFF
Smartphone alarm tone: OFF
11.2. Connecting the CRAFTY Vapo-
rizer with a Smartphone
Switch on the smartphone and down-
load the CRAFTY App. Ensure that
the Bluetooth function is switched
on and this is not blocked by another
Bluetooth device. Then switch on the
CRAFTY Vaporizer and, after that, the
CRAFTY App.
You will now be requested to enter
the serial number of your CRAFTY
Vaporizer. Enter the 6-digit number of
the type label on the underside of the
device.
It is sufficient to enter the serial num-
ber once. Calling the CRAFTY App au-
tomatically connects the two devices.
If another CRAFTY Vaporizer is to be
controlled by the same smartphone,
the previous connection is to be dis-
connected by use of the “Connect to
other CRAFTY “ button and the serial
number of the other CRAFTY Vapor-
izer entered.
Making the connection
11.3. The Menu Items of the CRAFTY
App
Temperature, Settings, Device, Information
Temperature:
Here you can read off the set and ac-
tual temperatures and carry out the
temperature settings. You will also find
here the charge indicator lamp of the
CRAFTY Vaporizer.
Settings:
You can also make further individual
settings here.
Device:
Here you find the device-related infor-
mation, such as operating hours, soft-
ware versions etc.
Information:
Here you find further information such
as lists of plants and prices, but also di-
rect links to the Storz & Bickel website
or to the online shop.

LED brightness Crafty
Charge indicator lamp Crafty
Vibration Crafty OFF
Smartphone alarm tone
Crafty serial number CY 247988
Vibration smartphone ON
Settings
Settings
ON
Temperature Device Information
Temperature
Temperature Settings Device Information
Booster temperature
Minus
temperature
button
Plus
temperature
button
Actual
temperature
Set
temperature
Charge
indicator lamp
Booster
temperature display
2928
11. CRAFTY APP 11. CRAFTY APP
When you press the plus button, the
set value is increased, and when you
press the minus button, the set value
is decreased. When you briefly tap
on the plus or minus button, the set
values are increased or decreased
respectively in 1-degree increments.
If you keep the plus or minus button
11.4. Setting Temperature with the CRAFTY App
The temperature can be set between 40°C and 210°C (104°F and 410°F) (see
Section 4. “Overview of Plants”).
pressed, the set values start running
continuously in the corresponding di-
rection.
The current actual temperature can be
read from the upper line of the display.
The booster temperature is always
added to the basic temperature. But
the total cannot exceed 210°C (410°F).
11.5. Further Individual SettingsFahrenheit/Celsius
If you simultaneously tap on the plus
button and the minus button, the dis-
play changes from degree Celsius to
degree Fahrenheit and vice versa.
Charge Indicator Lamp
The charge indicator lamp shows a
battery symbol with six fields indicat-
ing the charging status. If the battery is
almost discharged, the battery frame
to flash; if fully charged, the frame and
all six fields are visible.
The number of status fields visible
depends on the extent of the battery
charge.
During the charging of the CRAFTY
Vaporizer, the charge indicator lamp
flashes and shows the current level of
charging.
Settings
Functional elements Menu item Temperature
Charge indicator lamp
LED Brightness CRAFTY:
The brightness of the LED indica-
tor on the CRAFTY Vaporizer can be
dimmed using the slider control.
Charge Indicator Lamp CRAFTY :
Here, the blue lights of the LED indi-
cator can be switched on and off dur-
ing the charging operation. When the
power adapter is plugged in to start the
Reset to default settings
Reset to default settings
Connect to other Crafty
Connect to other Crafty

3130
Vibration Smartphone:
Here, in addition to the vibration of the
CRAFTY Vaporizer, the vibration of
the smartphone can also be switched
on and off here.
Smartphone Alarm Tone:
Any alarm tone of the smartphone
can also be switched on and off here
in parallel with the vibration of the
CRAFTY Vaporizer.
11.6. Menu Items for Device and In-
formation
Device:
Here you find device-related informa-
tion, such as operating hours, soft-
ware versions etc.
Information:
Here you find further information such
as lists of plants and prices, but also di-
rect links to the Storz & Bickel website
or to the online shop.
charging, the LED indication lights up
for a moment on red/green/blue and
the Vaporizer vibrates briefly. This
serves as a functional check and indi-
cates that the charging operation has
started.
Vibration CRAFTY :
The vibration motor of the CRAFTY
Vaporizer can be switched on and off
here.
Reset to Default Settings:
The default settings (see Section 11.1.
“Default Settings“) can be restored
here.
The following settings / values are re-
stored to the default settings:
Set temperature
Booster temperature
LED brightness
Charge indicator lamp
Vibration CRAFTY
Vibration smartphone
Smartphone alarm tone
Connect to other CRAFTY:
If another CRAFTY Vaporizer is to be
controlled by the same smartphone,
the previous connection can be dis-
connected so that the serial number
of the other CRAFTY Vaporizer can be
entered.
11. CRAFTY APP
Power Adapter:
Power consumption: 10 W
Supply voltage: 100-240 V / 50-60 Hz
Output voltage: 5 V DC
CRAFTY Vaporizer:
Supply voltage: 5 V DC
The voltage details are located on the respective type labels of the CRAFTY
Vaporizer and power adapter.
Power required by CRAFTY Vaporizer: 10 W max.
Operating temperature: 5°C - 40°C / 41°F - 104°F
Vaporization Temperature:
adjustable between approx. 40°C - 210°C / 104°F - 410°F
Dimensions: 11.0 x 5.7 x 3.3 cm (4.3 x 2.2 x 1.3 inch)
Weight: approx. 135 g (0.3 lbs)
Please unplug the power adapter from the mains socket to completely disconnect
from the mains power supply.
Subject to technical changes.
Patents: EP 2 599 512, US 9,272,103
Manufacturer:
Storz & Bickel GmbH & Co. KG
In Grubenäcker 5-9
78532 Tuttlingen, Germany
12. TECHNICAL SPECIFICATIONS
The devices comply with the following EC Directives:
DIN EN 60 335
DIN EN 60 950
Electromagnetic Compatibility 2004/108/EG
13. DECLARATION OF CONFORMITY

3332
Manufacturer’s Representations
and Warranties
These representations and warranties
are applicable to all end-customers
(the “Customers” and each, individu-
ally, a “Customer”) purchasing prod-
ucts (the “Products”) sold by Storz
& Bickel GmbH & Co. KG or Storz &
Bickel America, Inc. (the “Company”).
Warranty and Limitations
Company warrants solely to the origi-
nal purchaser of the Products that
for the warranty period (as defined
below), the Products will be free from
defects in materials and workmanship
under normal use, and will conform to
Company’s published specifications
of the Products. Notwithstanding the
foregoing, Company retains its right to
deviate from its published specifica-
tions due to the latest innovations and
improvements in function and design
of the Products. The foregoing war-
ranty is subject to the proper storage,
transportation and use of the Prod-
ucts, and does not include defects due
to normal wear and tear or deteriora-
tion, including, but not limited to, de-
fects in batteries, Screens and similar
parts subject to wear and tear.
Upon delivery, Customer shall imme-
diately inspect the Products for con-
formity and visible defects. Customer
shall give Company immediate written
notice of any non-conformities or vis-
ible defects regarding the Products
and contact Company in writing con-
cerning return or repair, as the case
may be.
Warranty
Customer shall notify Company in
writing of any defects of the Products.
Company’s sole obligation under the
foregoing warranty is, at Company’s
option, to repair or correct any such
covered defect or to replace or ex-
change the Product, provided Cus-
tomer has returned the Products with
a copy of the original invoice to the
Company or one of its authorized re-
pair shops at his own cost. Any re-
paired, corrected, replaced or ex-
changed Products shall be subject to
the warranty set forth in section
“Warranty and limitations”, follow-
ing their repair, correction, replace-
ment or exchange. If Company has
received notification from Customer,
and no defects of the Product could
be discovered, Customer shall bear
the costs that Company incurred as a
result of the notice.
The warranty period for the CRAFTY
Vaporizer begins on the date when
the Product is physically delivered to
the Customer’s site, and is valid for
twenty-four (24) months thereafter.
Company does not authorize any per-
son or party to assume or create for it
any other obligation or liability in con-
nection with the Products except as
set forth herein.
14. WARRANTY, LIABILITY, REPAIR SERVICE 14. WARRANTY, LIABILITY, REPAIR SERVICE
All requests and notices from U.S.
and Canadian Customers under this
warranty shall be directed to:
Storz & Bickel America, Inc.
1078 60th Street, Suite A
Oakland, CA 94608
All requests and notices from all
other Customers under this warranty
shall be directed to:
Storz & Bickel GmbH & Co. KG
In Grubenäcker 5-9
78532 Tuttlingen, Germany
The warranty set forth in section
“Warranty and limitations” is made
in lieu of all other warranties (whether
express or implied), rights or condi-
tions, and Customer acknowledges
that except for such limited warranty,
the Products are provided “as is.”
Company specifically disclaims, with-
out limitation, all other warranties, ex-
press or implied, of any kind, including,
without limitation, the implied warran-
ties of merchantability and fitness for a
particular purpose, non-infringement,
and those warranties arising from a
course of performance, a course of
dealing or trade usage.
Liability
Handling of these Products is to be as
stated in the Instructions for Use. The
user accepts full liability for improper
handling and usage of these Products.
The intended application only refers to
the plants named by us.
Repair of these Products is only to be
done by us or one of our authorized cus-
tomer services.
Only original Storz & Bickel parts are to
be used.
Failure to comply with any of the points
mentioned in these Instructions for Use
release Storz & Bickel GmbH & Co. KG
from any and all liability.
Limitation of Liability
In no event shall Company be liable
for any indirect, incidental, punitive,
special or consequential damages,
including but not limited to, damages
for loss of profits, revenue, goodwill or
use, incurred by Customer or any third
party, whether in an action in contract,
tort, strict liability, or imposed by stat-
ute, or otherwise, even if advised of the
possibility of such damages.
Company’s liability for damages aris-
ing out of or in connection with this
agreement shall in no event exceed
the purchase price of the Products. It
is agreed and acknowledged that the
provisions of this agreement allocate
the risks between Company and Cus-
tomer, that Company’s pricing reflects
this allocation of risk, and but for this
allocation and limitation of liability,
Company would not have entered into
this agreement.
In jurisdictions that limit the scope of
or preclude limitations or exclusion of
remedies or damages, or of liability,
such as liability for gross negligence
or willful misconduct or do not allow

34
Copyright
No part of this document may be repro-
duced in any form (by printing, photo-
copying or other means) or processed,
duplicated or circulated electronically
without the prior written approval of
Storz & Bickel GmbH & Co. KG.
implied warranties to be excluded,
the limitation or exclusion of warran-
ties, remedies, damages or liability set
forth above are intended to apply to
the maximum extent permitted by ap-
plicable law. Customer may also have
other rights that vary by state, country
or other jurisdiction.
The information contained in these
Instructions for Use are based on our
experience and is current and com-
plete to the best of our knowledge and
ability at the time of printing. Storz &
Bickel GmbH & Co. KG does not ac-
cept responsibility for errors, omis-
sions or incorrect interpretations of
the contents or any information herein.
Users are advised that all applications
and users of the Products described
must conform to applicable local laws,
ordinances and codes and users of
the Products are advised that they are
solely responsible for determining and
assuring the suitability of any Product
for the intended application.
Repair Service
After the warranty period has expired,
or if there are any defects which are
not covered under warranty, our ser-
vice department will repair the defect
after providing the Customer with an
estimate and receiving the payment.
14. WARRANTY, LIABILITY, REPAIR SERVICE

STORZ & BICKEL GMBH & C O. K G
In Grubenäcker 5-9 · 78532 Tuttlingen/Germany
STORZ & BICKEL AMERICA INC.
1078 60th St. Suite A · Oakland, CA 94608
©by STORZ & BICKEL GmbH & Co. KG · CAL-30-202-E 08-2016 · Subject to alterations · All rights reserved