Greenway Home Products Andante GEF282ABL User manual

Assembly Instructions
Instructions d'assemblée
Model / Modèle: GEF282ABL
Electric Fireplace
with integrated
sound system
Foyer électrique
avec système
sonore intégré

TIPS FOR ASSEMBLY OF YOUR
NEW MANTEL
• Before you begin assembly, ensure you have the complete instructions and locate the red hardware
bag which contains all the hardware you need to assemble this mantel. Take out all the parts and
compare them to the photograph and assembly instructions. Be sure you have all the parts and can
identify them.
• A helping hand is always good: assemble your mantel with an adult assistant if possible. Some
pieces are heavy and will need to be held by a helper. Assembly time will be approximately
30-60 minutes.
• Locate a good Phillips-head screwdriver. You may also use an electric screwdriver but be careful not
to strip the head of the screw by over tightening them.
• After you assemble your mantel, if you find you have interference between the door and the hearth
please see Step 10 of these installation instructions for the solution.
TOP 1PC
ZZ.03.8001
BASE 1PC
ZZ.03.8000
LEFT LEG
1PC
ZZ.03.8002
CENTRAL PANEL 1PC
ZZ.03.8004
FLAT HEAD SCREW
15PCS
ANTI-TIP DEVICE 2 SETS
1144
RIGHT LEG
1PC
ZZ.03.8003

GET READY TO START
Before assembly, use scissors to unwrap the parts from the packaging. DO NOT use a box cutter or
exacto-knife as you may cut into the mantel pieces inside the box and damage the finish. Check for the
hardware bag which is red and located inside the packaging taped to the top box. Be sure you DO
NOT discard any pieces.
For the easiest assembly, use a power Phillips-head screwdriver. DO NOT over tighten the screws.
Step 1
Locate the hearth and place it on the floor. Do not put it up against
the wall at this point in the assembly as you need to get in behind
the mantel to insert several screws.
Step 2
Locate the left leg of the mantel. Facing the front of the hearth, take the
left leg, positioning it so the holes in the blocks on the legs line up with
the screw holes in the hearth. Insert the 1” screws into the smaller
screw holes and tighten.
Step 3
Locate the right leg of the mantel. Facing the front of the hearth, take the right leg, positioning it so the
holes in the blocks on the legs line up with the screw holes in the hearth. Insert the 1” screws into the
smaller screw holes and tighten.

Step 4
Take your electric firebox out of its packaging and position it between the 2 legs of the mantel. Ensure
the plug is at the back of your mantel, ready to be plugged in before you position your mantel in place
up against the wall. The firebox does not get attached to the mantel in any way ……… it just sits there.
If you have any questions about the firebox please reference the installation instructions that come with
the unit. Please reference the Quick Tips section of that instruction manual.
Step 5
Locate the header piece that will be attached to the left and right legs and will sit above the firebox.
Position the header with the finished side facing the front of the mantel. Insert and tighten the 4 screws
which will hold the header in place.
CAUTION
DO NOT USE AN ELECTRIC DRILL TO INSERT THESE SCREWS. A POWER DRILL CAN DRIVE THE
SCREWS THROUGH THE FACE OF THIS PANEL THIS SHOULD NOT HAPPEN WITH A MANUAL
SCREW DRIVER.

Step 6
Get your helper and locate the top of your mantel. This top is very heavy. It will take 2 people to lift
and position it in place. Ensure the top goes over the positioning guide located on the header. The top
must go over this guide to be positioned correctly. Once the top is in place insert and tighten the 9
screws which hold the top in place.
Step 7
For assembly of the audio kit please refer to the audio kit manual in the subwoofer box. Follow the
instructions and your system will be ready for your listening pleasure.
Step 8
You are now ready to position your mantel against the wall. This step requires 2 people to move the
unit. Once you are close to the wall, plug the firebox into the nearest outlet.
Anti-tipping device
At this point you must attach the anti-dipping device to your mantel and your wall. This device is a
safety feature that will prevent your mantel from tipping over if a weight is applied which can
unbalance the unit (like a child climbing onto it).

WARRANTY
DO NOT RETURN THIS PRODUCT TO THE STORE:
Greenway Home Products is pleased to offer in home warranty repairs.
Please contact Customer Service at:
In Canada: 1-866-253-0447
In the USA: 1-866-282-0533
Limited Warranty Definitions
Greenway Home Products: Manufacturer.
Mantel: Mantel manufactured by Greenway Home Products.
Purchaser: Purchaser of the Mantel
Distributor: Facility authorized to sell Greenway Home Products.
Warranty Card Greenway Home Products Limited Warranty Registration
Card identifying the Purchaser and product model.
Greenway Limited Warranty:
Greenway warrants to the Purchaser that the Mantel is free from defects in material and
workmanship, under normal use and service, for 1 year (1 year limited parts) from the date
of purchase.
All warranty repairs must be preauthorized by Greenway Home Products. Greenway will,
at its option, replace or repair free of charge any defective part, which the Purchaser shall
notify their Distributor or Greenway Home Products within the warranty period. The
obligation of Greenway Home Products under this warranty, is expressly limited to such
replacement or repairs.
The provisions of this limited warranty shall not apply to the following:
1. Accidents.
2. Unauthorized repairs or alterations.
3. Normal maintenance.
4. Changes made to other units manufactured after this mantel was manufactured.
5. Incidental damages caused by failure of the wine cooler such as inconvenience or
loss of use.
6. Improper installation.
The provisions of this limited warranty shall not apply to deterioration due to wear and
exposure beyond the following limitations:
1. For 180 days from the date of purchase for exterior finished surfaces.

Due to the properties of natural wood, Greenway Home Products makes no warranty against
mineraling of wood components.
Greenway Limited Warranty is void unless the following conditions are adhered to:
1. Warranty registration must be completed and returned to Greenway Home Products.
2. All warranty repairs must be preauthorized by Greenway repair facility.
3. Greenway reserves the right to inspect defective parts that have been replaced under
warranty. Dealer is expected to hold defective parts for 60 days.
4. Only parts and accessories and other material, available through Greenway Home
Products are to be used in the performance of warranty service.
5. Purchasers are responsible for presenting/notifying their Distributor as soon a problem
exists. The warranty repairs should be completed in a reasonable amount of time from
the date of authorization. Not to exceed 30 days past notification.
6. It is the original purchaser’s responsibility to deliver this unit (along with the original proof
of purchase) to the nearest authorized service center. Any transportation charges incurred
are the responsibility of the purchaser and are not included in this warranty.
This limited warranty is expressly in lieu of any other expressed or implied warranty, includ-
ing any implied warranty or merchantability or fitness for a particular purpose and of any
obligations or liabilities on Greenway Home Products which neither assumes nor authorizes
any other person to assume for it any other liability in connection with the Water Dispenser
manufactured by it.
The warranty is null and void if used in commercial or industrial applications.