GreenWorks 27032 User manual
Read all safety rules and instructions carefully before operating this tool.
Owner’s Manual
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)
7-1/2″ ELECTRIC LAWN EDGER
27032
2
.............................................................................................................................. 2
......................................................................................................... 2
............................................................................................3 -5
........................................................................................................... 6
............................................................................................................................8- 9
....................................................................................................................... 10-11
...................................................................................................................... 13-16
Operation.......................................................................................................................17-21
Maintenance ................................................................................................................. 22-24
................................................................................................................. 2 5
............................................................................................................................ 2 6
.............................................................................................................. 27-29
7-1/2″ ELECTRIC LAWN EDGER ...................................................................................
..............................................................................
...............................................................................................
........................................................................................................14 lb (6.3 kg)
3
WARNING
operating this product.
DANGER: ROTATING CUTTING MEMBER.
Keep both hands on handles when blade is rotating.
Keep guards in place.
Keep blade clean and sharp. Replace dull blades as needed.
CAUTION: CUTTING MEMBER COASTS AFTER TURN OFF.
4
refrigerators.
risk of electric shock.
5
they replace.
switch is off when plugging in.
rate for which it was designed.
6
Be sure all guards are properly and securely attached.
other purpose.
the product.
the blade is rotating.
by the edger.
rotating.
SAVE THESE INSTRUCTIONS
7
er.
o
particles.
CHILD SAFETY
agic accidents can occur if the operator is not aware of the presence of children.
Keep c chful care of a responsible adult.
not allow children under the age of 14 to operate this wer. hildren who are 14 years
of age and olderust read and understand the operating instructions and safety rules in this
ised by a parent.
Stay alertnd turn the wer off if a child or any ot
ing backwards.
e care when approaching blind corn doorway shr tor other o
thaay r.
W A R N I N G ( P R O P O S I T O I N 6 5 )
8
SYMBOL NAME DESIGNATION/EXPLANATION
product.
shield when operating this product.
9
with this product.
SERVICE
AUTHORIZED
SERVICE CENTER
WARNING
for assistance.
WARNING
DANGER
WARNING
CAUTION
CAUTION
SAVE THESE INSTRUCTIONS
SYMBOL SIGNAL MEANING
10
WARNING
DOUBLE INSULATED (See Figure 1.)
WARNING
WARNING
WARNING
GROUNDING INSTRUCTIONS
1) 2-prong plug
11
SAVE THESE INSTRUCTIONS
CAUTION
WARNING
GUIDELINES FOR USING EXTENSION CORDS
WARNING
MINIMUM GAUGE FOR EXTENSION CORDS (AWG)
Amp Rating Total Length of Cord in Feet (meters)
More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m)
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12
KNOW YOUR EDGER (See Figure 2.)
CORD RETAINER
operation.
FRONT HANDLE
LAWN EDGING AND TRENCHING
LOCK-OFF BUTTON
SPRING ASSIST FRONT WHEEL
WHEELS
LOCK-OFF
BUTTON
REAR
HANDLE
SWITCH
TRIGGER
CORD
RETAINER
UPPER
HANDLE TUBE
MIDDLE
HANDLE TUBE
LOWER
HANDLE TUBE
ADJUSTABLE
FRONT HANDLE
EDGER
GUARD
ADJUSTING
KNOB
WHEELS
BLADE SPRING ASSIST
FRONT WHEEL
13
UNPACKING
shipping.
operated the product.
1-888- 909-6757 for assistance.
PACKING LIST
Operator’s Manual
WARNING
WARNING
WARNING
14
CONNECTING THE POLES (See Figure 3.)
poles are connected by an electrical cord as shown below.
1.
2.
3.
wire inside the tube.
4.
CAUTION: NEVER use a sharp object to move jacketed wires out of the way.
WARNING
LOWER
HANDLE
TUBE
MIDDLE
HANDLE
TUBE
BOLT (2)
KNOB (1)
UPPER
HANDLE
TUBE
15
ASSEMBLING THE FRONT WHEEL (See Figure 4.)
1.
2. Put down the front wheel.
3.
(A)
(B)
(C)
(1)
(2)
ADJUSTING
KNOB
16
WARNING
WARNING
WARNING
APPLICATIONS
CONNECTING TO POWER SUPPLY (See Figure 5.)
loose while using.
NOTE: Failure to remove all excess cord slack from extension cord retainer could result in plug loosening
from receptacle.
17
STARTING AND STOPPING (See Figure 5.)
To start the motor:
To stop the motor:
Release the switch trigger.
SWITCH
TRIGGER
LOCK-OFF
BUTTON
CORD
RETAINER
OUTLET
END
18
POSITION AUXILIARY HANDLE (See Figure 6.)
Rotate the knob counterclockwise to loosen.
Rotate the knob clockwise to secure.
UP
DOWN
KNOB
ROTATE 360º
19
ADJUSTING POLE HEIGHT (See Figure 7.)
Rotate the knobs counterclockwise to loosen.
NOTE : Adjust hand placement on the shaft of the edger to keep proper balance. Do not attempt to use the
edger at a length which does not allow you to achieve proper footing and balance at all times.
KNOB
KNOB
BOLT
BOLT
UPPER
HANDLE
TUBE
MIDDLE
HANDLE
TUBE
LOWER
HANDLE
TUBE
20
ADJUSTING DEPTH OF CUT (See Figure 8-9.)
The front wheel can be adjusted to allow a deeper or shallower cut, and to increase the life of the
blade. Change the edging depth from the shipping position to your desired depth by:
•Wait for blade to come to a complete stop.
•u NPLu G Too L.
•Loosen the adjusting knob and move the wheel up to increase the depth or down to
decrease the depth.
•After adjustment is complete, tighten the adjusting knob securely.
NOTE: Adjust the blade depth from 1/2 in. to 1 in. deep initially. Make a shallow cut to test the cutting depth.
If the cutting depth needs adjusting, this should be done progressively until the desired depth is
reached. To increase blade life span, keep initial cutting depth at minimum and increase depth setting
only as blade wears.
W A R N I N G
Thick overgrowth may drag on the guard. Reduce cut depth to minimum to help reduce this affect.
Fig. 8
Fig. 9
BLADE
CURB
BLADE
DEPTH
TO INCREASE
DEPTH
TO DECREASE
DEPTH ADJUSTING
KNOB
o PERATIo N
Table of contents
Other GreenWorks Lawn Mower manuals
GreenWorks
GreenWorks LME367 User manual
GreenWorks
GreenWorks G24X2LM46S User manual
GreenWorks
GreenWorks MO48L4423 User manual
GreenWorks
GreenWorks LMF421 User manual
GreenWorks
GreenWorks MO40B00 User manual
GreenWorks
GreenWorks LME364 User manual
GreenWorks
GreenWorks MO48L4214 User manual
GreenWorks
GreenWorks 2502902BT User manual
GreenWorks
GreenWorks GD60LM51SP User manual
GreenWorks
GreenWorks 2502202 User manual
GreenWorks
GreenWorks GM 210 User manual
GreenWorks
GreenWorks LMF334 User manual
GreenWorks
GreenWorks MO48L520 User manual
GreenWorks
GreenWorks MO40L01 User manual
GreenWorks
GreenWorks Optimow 10 User manual
GreenWorks
GreenWorks MO48L2211 User manual
GreenWorks
GreenWorks M-210-T User manual
GreenWorks
GreenWorks LMF413 User manual
GreenWorks
GreenWorks 25292 User manual
GreenWorks
GreenWorks GRL110 User manual
