Griffin Technology TR200 User manual
www.Griffin-Stands.com
Saddle Drum
Throne
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
User Manual
M o d e l # T R 2 0 0
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
Stands.com
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Saddle Drum
Throne. Your product comes with a 1 year factory
warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing TR200
into the search bar.
Step 1 –Take the main stand with the legs, flip
it, loosen the knob and spread the legs using
two hands. Use the locking knob and turn to
tighten in place. (See Figure 1 and 2). Flip the
stand and make sure that the legs are flat on
the floor.
Step 2 –Insert the center post through the
bottom of the saddle seat and tighten the knob to
keep in place. Also, you need to check the bolt (as
seen on Figure 3) and make sure it is tightened
well by using an allen wrench.
Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos
Step 4 –For safety reasons, please always make
sure to test the stability and safety of the product
before use. Double check all nuts and bolts,
knobs and connectors, make sure that these are
tight and securely fastened before use of your
product. Test the product under light use or light
loads the first time to confirm assembly and
structure of the product is correct.
Step 3 –The knob near the center post is to
tighten or loosen the spinning inner post with
makes the seat swivel, you may or may not adjust
this depending on your preference. If you do not
want the seat to swivel just tighten the knob
(refer to Figure 4). To raise and lower the seat just
loosen the knob and turn the seat.
Step 5 –(If purchased with optional back rest) on
the underside of the seat there are bolt holes to
screw in the metal pipe and on the top part of the
metal pipe will also be bolt holes to screw and
attach the back rest. Make sure not to tighten
each bolt all the way through to make sure that all
bolts can be inserted. After installing all bolts to
the seat, that is the time to tighten all bolts by 1
turn each to secure the level of the back rest.
