Grizzly H3143 Guide

H3143 Wax Buffer -5-
Gasoline or petroleum products used
to clean the tool could explode caus-
ing serious personal injury. DO NOT
use gasoline or petroleum products
to clean the tool.
Cleaning The Buffer
•Use only a mild soap to clean the bon-
nets.
•Wash the bonnets by hand and hang
dry.
•When not in use, remove the bonnets
and store the buffer with the pad facing
up. This allows the pad to retain its orig-
inal form.
•Periodically clean the buffer with a dry
cotton cloth. DO NOT use flammable
products or spray cleaners.
Carbon Motor Brushes
The Model H3143 has a brush-type electric
motor. Because the buffer needs to be dis-
assembled to gain access to the brushes,
servicing them should only be performed
by a qualified technician.
Repairs
The Model H3143 is a double insulated
and UL®listed tool which should only be
repaired by a qualified technician. DO NOT
attempt to open the tool housing or per-
form any electrical repairs. Contact our
Customer Service Department if the tool
stops working or malfunctions.
Replacement Parts
01 PH3143001 MOTOR BRUSH (2)
02` PH3143002 BODY TOP HALF
03 PH3143003 BODY LOWER HALF
04 PH3143004 TERRYCLOTH CAP
05 PH3143005 SYNTHETIC CAP
06 PH3143006 SWITCH
07 PH3143007 SWITCH SLIDER
08 PHTEK13 TAP SCREW #8 X 11⁄16"
09 PH3143009 MOTOR ASSEMBLY
REF PART # DESCRIPTION
MAINTENANCE
Unplug the tool from the power
source before performing any main-
tenance! Failure to follow this warn-
ing could result in serious personal
injury.