Grizzly G0563 Instruction Manual

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2Model G0563
MACHINE DATA
SHEET
Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]
MODEL G0563 OSCILLATING EDGE SANDER 2 HP
Product Dimensions:
Weight.............................................................................................................................................................. 396 lbs.
Length/Width/Height.......................................................................................................................50-1/2 x 23 x 49 in.
Foot Print (Length/Width).................................................................................................................22-1/2 x 19-1/2 in.
Shipping Dimensions:
Type.........................................................................................................................................................Not Available
Content.................................................................................................................................................... Not Available
Weight.................................................................................................................................................................... N/A
Length/Width/Height........................................................................................................................... N/A x N/A x N/A
Electrical:
Switch............................................................................................................Magnetic Contactor and Overload Relay
Switch Voltage......................................................................................................................................................220V
Cord Length.......................................................................................................................................................... 10 ft.
Cord Gauge....................................................................................................................................................14 gauge
Minimum Circuit Size........................................................................................................................................ 15 amp
Plug Included............................................................................................................................................................No
Motors:
Main
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................2 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................Single
Amps.............................................................................................................................................................12A
Speed.................................................................................................................................................1725 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ................................................................................................................................Direct Drive
Bearings..................................................................................................Shielded and Permanently Lubricated
Main Specifications:
Operation Information
Sanding Belt Speed............................................................................................................................3150 FPM
Sanding Belt Oscillations...........................................................................................................................3/4 in.
Sanding Belt Length...................................................................................................................................89 in.
Sanding Belt Width.......................................................................................................................................6 in.
Sanding Belt Tilt.................................................................................................................................0 - 90 deg.

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2Model G0563
Table Information
Table Length........................................................................................................................................26-7/8 in.
Table Width................................................................................................................................................12 in.
Table Thickness.....................................................................................................................................1-1/4 in.
Table Travel...........................................................................................................................................3-3/4 in.
Floor To Table Height.............................................................................................................35-3/4 - 39-1/2 in.
End Table Length.................................................................................................................................11-1/2 in.
End Table Width.........................................................................................................................................10 in.
End Table Thickness.................................................................................................................................3/4 in.
End Table Travel........................................................................................................................................10 in.
Platen Information
Platen Type...................................................................................................................Steel with Graphite Pad
Platen Length.......................................................................................................................................30-1/4 in.
Platen Width...........................................................................................................................................6-3/4 in.
Platen Travel......................................................................................................................................0 - 90 deg.
Construction
Table Construction...................................................................................................Precision Ground Cast Iron
Frame Construction......................................................................................................................... Sheet Metal
Base Construction............................................................................................................................Sheet Metal
Drive Roller Construction....................................................................................................................Aluminum
Idler Roller Construction..........................................................................................................................Rubber
Paint...........................................................................................................................................Powder Coated
Other Related Information
No Of Dust Ports...............................................................................................................................................2
Dust Port Size.............................................................................................................................................. 4 in.
Belt Release...................................................................................................................... Quick Release Lever
Drive Roller Size...........................................................................................................................................7 in.
Idler Roller Size......................................................................................................................................3-7/8 in.
Other Specifications:
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location ............................................................................................................................On the Base
Assembly Time ...........................................................................................................................................10 minutes
Sound Rating ......................................................................................................................................................90 dB
Features:
Sanding Surface Tilts Vertical to Horizontal
T-Slot Table and Miter Gauge
Quick Release Belt Tension Lever
Graphite Coated Platen
Oscillating Sanding Surfaces
Sanding Belt Oscillates at 52 Cycles per Minute
Includes 3 Spindles Drums: 1 1/2", 2", 3" x 4 1/2"
Platen Tilts 0 to 90 degrees (5 deg. Scale)