Grundig GQN21235XRN User manual

EN/PL
58 4401 0000/AF - 1/2-EN-PL
Refrigerator
User Manual
Chłodziarka
Instrukcja użytkowania
GQN21235XRN

Contents
1- Safety Instructions 2
2. Your Freezer 8
2. Your Freezer 9
3. Installation 10
3.1 Right place for installation ... 10
3.2 Attaching the plastic wedges 10
3.3 Electrical connection ........ 10
3.4 *Adjusting the stands ........... 12
3.5 Water connection .............. 12
3.5.1 Before Installation ............. 13
3.6 Connecting the water hose
to the refrigerator ....................... 13
3.7 Connecting the water line to
the water supply ......................... 13
4 Preparation 14
4.1 Things to be done for saving
energy ......................................... 14
4.2 Recommendations about the
fresh food compartment ............ 15
4.3 Initial use ........................... 15
5. Operating the product 16
5.1 Indicator panel .................. 16
5.2 Indicator panel .................. 22
5.3 Freezing fresh food ............... 25
5.4 Recommendations for
preserving the frozen food ......... 26
5.5 Deep-freeze information ...... 26
5.6 Placing the food .................... 27
5.7 Door open warning ............... 27
5.8 Crisper .................................. 27
5.9 Humidity-controlled crisper .27
(FreSHelf) .................................... 27
5.10 Egg tray ............................... 28
5.11 Movable Middle Section ..... 28
5.12 Cool Control Storage
Compartment ........................... 28
5.13 Blue light/ Vitamin Care
Technology .................................. 29
5.15 Wine cellar compartment .. 30
5.16Use of internal water
dispenser and water dispenser at
the door ....................................... 32
5.17 Dispensing Water ............... 32
5.18 For using water dispenser . 33
33
5.19 Icematic .............................. 34
5.20 Icematic and ice storage
container ..................................... 34
6 Maintenance and cleaning 35
6.1 Avoiding bad odours.......... 35
6.2 Protecting the plastic
surfaces ..................................... 35
7. Troubleshooting 36

1
CZ
SK
PL
Please read this manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants
and checked under the most meticulous quality control procedures, will
provide you an effective service
For this, we recommend you to carefully read the entire manual of your
product before using it and keep it at hand for future references.
The user manual will help you use the product in a fast and safe way.
Will help you use your appliance in a fast and safe way.
Read the manual before installing and operating your product.
Follow the instructions, especially those for safety.
Keep the manual in an easily accessible place as you may need it later.
Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
CImportant information
or useful usage tips.
AWarning against
dangerous conditions
for life and property.
BWarning against
electric voltage.
Packaging materials
of the product are
manufactured from
recyclable materials
in accordance with our
National Environment
Regulations.
A
A
A
C
SUPPLIER’S NAME MODEL IDENTIFIER (*)
INFORMATION
C
.The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/

2
• This section contains safety
instructions that will help get
protected against risks of personal
injury or property damage.
• Our company shall not be
responsible for damages that may
arise when these instructions are
not followed.
A Installation and
repair procedures must always be
performed by the manufacturer,
authorised service agent or a
qualified person specified by the
importer.
A Only use original parts
and accessories.
A Original spare parts will
be provided for 10 years, following the
product purchasing date.
A Do not repair or replace
any part of the product unless
specified expressly in the user
manual.
A Do not make any
technical modifications to the
product.
A1.1 Intended Use
• This product is not suitable for
commercial use and it must not be
used out of its intended use.
This product is designed to be used
in houses and indoor places.
For example:
- Personnel kitchens in
stores, offices and other working
environments,
- Farm houses,
- Areas used by customers at
hotels, motels and other types of
accommodation,
- Bed&breakfast type hotels,
boardinghouses,
- Catering and similar non-retail
applications.
This product should not be used
outdoors with or without a tent
above it such as boats, balconies
or terraces. Do not expose the
product to rain, snow, sun or wind.
There is the risk of fire!
A 1.2 - Safety for
children, vulnerable
persons and pets
• This product can be used by
children at and above 8 years
old and by persons with limited
physical, sensory or mental
capabilities or who lack experience
and knowledge provided that they
are supervised or trained on the
safe use of the product and the
risks it brings out.
• Children aged from 3 to 8 years
are allowed to load and unload
refrigerating products.
1- Safety Instructions

3
CZ
SK
PL
• Electrical products are dangerous for
children and pets. Children and pets
must not play with, climb or enter the
product.
• Cleaning and user maintenance
should not be performed by children
unless they are supervised by
someone.
• Keep packaging materials away from
children. There is the risk of injury and
suffocation!
• Before disposing of the old or obsolete
product:
1. Unplug the product by
gripping from the plug.
2. Cut the power cable and
remove it from the appliance
together with its plug
3. Do not remove the shelves
or drawers so that it is harder for
children to enter the product.
4. Remove the doors.
5. Keep the product in a way
that it will not tip over.
6. Do not allow children play
with the old product.
• Never throw the product into fire for
disposal. There is the risk of explosion!
• If there is a lock on the door of the
product, the key should be kept out of
the reach of children.
A 1.3 - Electrical safety
• The product must be unplugged during
installation, maintenance, cleaning,
repairing and moving procedures.
• If the power cable is damaged, it
must be replaced by a qualified
person specified by the manufacturer,
authorised service agent or importer
in order to avoid potential dangers.
• Do not squeeze the power cable
under or behind the product. Do not
place heavy objects on the power
cable. Power cable must not be
bent excessively, pinched or get in
contact with any heat source.
• Do not use extension cords, multi-
sockets or adapters to operate the
product.
• Portable multi-sockets or portable
power sources can overheat and
cause fire. Therefore, do not keep
any multi-sockets behind or near
the product.
• Plug must be easily accessible. If
this is not possible, the electrical
installation to which the product is
connected must contain a device
(such as a fuse, switch, circuit
breaker, etc.) which conforms
to the electrical regulations and
disconnects all poles from the grid.
• Do not touch the power plug with
wet hands.
• Remove the plug from the socket
by gripping the plug and not the
cable.
A 1.4 - Transportation
safety
• Product is heavy; do not move it
alone.
• Do not hold its door when moving
the product.
• Pay attention not to damage the
cooling system or the piping
during transportation. If the piping
is damaged, do not operate the
product and call the authorised
service agent.

4
A 1.5 - Installation safety
• Call the authorised service agent
for installation of the product. To
make the product ready for use,
check the information in the user
manual to make sure that the
electricity and water installations
are suitable. If they are not, call a
qualified electrician and plumber to
have the necessary arrangements
made. Otherwise, there is the risk
of electric shock, fire, problems
with the product, or injury!
• Prior to installation, check if the
product has any defects on it. If the
product is damaged, do not have it
installed.
• Place the product on a clean, flat
and solid surface and balance it
with adjustable feet. Otherwise,
the product may tip over and cause
injuries.
• The installation location must be
dry and well ventilated. Do not
place carpets, rugs or similar
covers under the product.
Insufficient ventilation causes the
risk of fire!
• Do not cover or block the ventilation
openings. Otherwise, power
consumption increases and your
product may get damaged.
• Product must not be connected
to supply systems such as solar
power supplies. Otherwise, your
product may get damaged due to
sudden voltage changes!
• The more refrigerant a refrigerator
contains, the larger the installation
location must be. If the installation
location is too small, flammable
refrigerant and air mixture will
accumulate in cases of refrigerant
leakage in cooling system. The
required space for each 8 gr of
refrigerant is 1 m³ minimum.
The amount of refrigerant in your
product is indicated on the Type
Label.
• Product must not be installed in
places exposed to direct sunlight
and it must be kept away from heat
sources such as hobs, radiators,
etc.
If it is inevitable to install the
product close to a heat source, a
suitable insulation plate must be
used in between and the following
minimum distances must be kept
to the heat source:
- Minimum 30 cm away from
heat sources such as hobs, ovens,
heater units or stoves,
- Minimum 5 cm away from
electric ovens.
• Protection class of your product
is Type I. Plug the product in a
grounded socket that conforms
the voltage, current and frequency
values stated on the type label of
the product. The socket must be
equipped with a 10 A – 16 A circuit
breaker. Our company shall not
be liable for any damages that will
arise when the product is used
without grounding and electrical
connection in accordance with the
local and national regulations.
• Product must not be plugged in
during installation. Otherwise,
there is the risk of electric shock
and injury!
• Do not plug the product in sockets
that are loose, dislocated, broken,
dirty, greasy or bear the risk of
getting in contact with water.
• Route the power cable and hoses
(if any) of the product in a way that
they do not cause risk of tripping
over.

5
CZ
SK
PL
• Exposing the live parts or power
cable to humidity may cause short
circuit. Therefore, do not install the
product in places such as garages
or laundry rooms where humidity
is high or water may splash. If the
refrigerator gets wet with water,
unplug it and call the authorised
service agent.
• Never connect your refrigerator
to energy saving devices. Such
systems are harmful to your
product.
A 1.6- Operational safety
• Never use chemical solvents on
the product. There is the risk of
explosion!
• If the product malfunctions, unplug
it and do not operate until it is
repaired by the authorised service
agent. There is the risk of electric
shock!
• Do not place flame sources (lit
candles, cigarettes, etc.) on or close
to the product.
• Do not climb on the product. There
is the risk of falling and getting
injured!
• Do not damage the pipes of the
cooling system with sharp or
penetrating objects. The refrigerant
that might come out when the
refrigerant pipes, pipe extensions
or surface coatings are punctured
causes skin irritations and eye
injuries.
• Unless recommended by the
manufacturer, do not place or
use electrical devices inside the
refrigerator/deep freezer.
• Be careful not to trap your hands
or any other part of your body
in the moving parts inside the
refrigerator. Pay attention not to
squeeze your fingers between
the door and the refrigerator. Be
careful when opening and closing
the door particularly if there are
children around.
• Never eat ice cream, ice cubes or
frozen food right after removing
them from the refrigerator. There is
the risk of frostbite!
• When your hands are wet, do not
touch the inner walls or metal
parts of the freezer or the food
stored therein. There is the risk of
frostbite!
• Do not place tins or bottles that
contain carbonated drinks or
freezable liquids in the freezer
compartment. Tins and bottles may
burst. There is the risk of injury and
material damage!
• Do not place or use flammable
sprays, flammable materials, dry
ice, chemical substances or similar
heat-sensitive materials near the
refrigerator. There is the risk of fire
and explosion!
• Do not store explosive materials
that contain flammable materials,
such as aerosol cans, in your
product.
• Do not place containers filled with
liquid onto the product. Splashing
water on an electrical part may
cause electric shock or the risk of
fire.
• This product is not intended for
storing medicines, blood plasma,
laboratory preparations or similar
medical substances and products
subject to Medical Products
Directive.
• Using the product against its
intended purpose may cause
the products stored inside it to
deteriorate or spoil.

6
• If your refrigerator is equipped with
blue light, do not look at this light
with optical tools. Do not stare at
UV LED lamp directly for a long
time. Ultraviolet light may cause
eye strain.
• Do not overload the product.
Objects in the refrigerator may fall
down when the door is opened,
causing injury or damage. Similar
problems may arise if any object is
placed onto the product.
• To avoid injuries, make sure that
you have cleaned all the ice and
water that may have fallen or
splashed on the floor.
• Change the position of the shelves/
bottle holders on the door of your
refrigerator only when they are
empty. There is the risk of injury!
• Do not place objects that can fall
down/tip over onto the product.
Such objects may fall down when
the door is opened and cause
injuries and/or material damage.
• Do not hit or exert excessive force
on glass surfaces. Broken glass
may cause injuries and/or material
damage.
• Cooling system of your product
contains R600a refrigerant: Type of
the refrigerant used in the product
is indicated on the type label.
This refrigerant is flammable.
Therefore, pay attention not to
damage the cooling system or the
piping while the product is in use. If
the piping is damaged:
- Do not touch the product or
the power cable,
- Keep away potential sources
of fire that may cause the product
to catch fire.
- Ventilate the area where the
product is located. Do not use fans.
- Call the authorised service
agent.
• If the product is damaged and you
see refrigerant leak, please stay away
from the refrigerant. Refrigerant may
cause frostbite in case of skin contact.
For products with a Water
Dispenser/Ice Machine
• Use only potable water. Do not
fill the water tank with any
liquids -such as fruit juice,
milk, carbonated beverages or
alcoholic drinks- that are not
suitable for use in the water
dispenser.
• There is the risk for health and
safety!
• Do not allow children play with
the water dispenser or ice
machine (Icematic) in order to
prevent accidents or injuries.
• Do not insert your fingers or
other objects into the water
dispenser hole, water channel
or ice machine container. There
is the risk of injury or material
damage!
A 1.7- Maintenance
and cleaning safety
• Do not pull from the door handle if
you need to move the product for
cleaning purposes. Handle may
break and cause injuries if you exert
excessive force on it.
• Do not spray or pour water on or
inside the product for cleaning
purposes. There is the risk of fire and
electric shock!
• Do not use sharp or abrasive tools
when cleaning the product. Do not
use household cleaning products,
detergent, gas, gasoline, thinner,
alcohol, varnish etc.

7
CZ
SK
PL
• Only use cleaning and maintenance
products inside the product that are
not harmful for food.
• Never use steam or steam assisted
cleaners to clean or defrost
the product. Steam gets into
contact with the live parts in your
refrigerator, causing short circuit or
electric shock!
• Make sure that no water enters
the electronic circuits or lighting
elements of the product.
• Use a clean and dry cloth to wipe
the foreign materials or dust on the
pins of the plug. Do not use a wet or
damp cloth to clean the plug. There
is the risk of fire and electric shock!
A 1.8- HomeWhiz
• When you operate your product
through HomeWhiz application, you
must observe the safety warnings
even when you are away from the
product. You must also follow the
warnings in the application.
A 1.9- Lighting
• Call the authorised service when it
is required to replace the LED/bulb
used for lighting.

8
2. Your Freezer
C
Figures in this user manual are schematic and may not match
the product exactly. If the subject parts are not included in the
product you have purchased, then those parts are valid for other
models.
1. Control and indicator panel
2. Butter & Cheese section
3. 70 mm moving door shelf
4. Fridge compartment glass
shelf
5. Fridge compartment cris-
per
6. Gallon door shelf
7. Chiller compartment
8. Icebox drawer
9. Multizone compartment glass
shelf/cooler
10. Freezer compartment dra-
wers
11. Multizone Compartment’s
drawer
12. Water tank
*Optional
6
*12

9
CZ
SK
PL
*2
*3
4
56
7
*8
9
1
10
5*11
2. Your Freezer
C
Figures in this user manual are schematic and may not match
the product exactly. If the subject parts are not included in the
product you have purchased, then those parts are valid for other
models.
1. Control and indicator panel
2. Butter & Cheese section
3. 70 mm moving door shelf
4. Fridge compartment glass
shelf
5. Fridge compartment cris-
per
6. Gallon door shelf
7. Chiller compartment
8. Icebox drawer
9. Multizone compartment glass
shelf/cooler
10. Freezer compartment dra-
wers
11. Multizone Compartment’s
drawer
12. Water tank
*Optional

10
3. Installation
3.1 Right place for installation
Contact the Authorized Service for
the product's installation. To ready
the product for installation, see the
information in the user guide and
make sure the electric and water
utilities are as required. If not,
call an electrician and plumber to
arrange the utilities as necessary.
B
WARNING: The
manufacturer assumes
no responsibility for
any damage caused by
the work carried out by
unauthorized persons.
B
WARNING: The
product’s power cable
must be unplugged
during installation.
Failure to do so may
result in death or
serious injuries!
A
WARNING: If the door
span is too narrow
for the product to
pass, remove the door
and turn the product
sideways; if this does
not work, contact the
authorized service.
3.2 Attaching the
plastic wedges
Plastic wedges are used to create
the distance for the air circulation
between the product and the rear
wall.
1. To install the wedges, remove
the screws on the product and
use the screws supplied to-
gether with the wedges.
2. Insert the 2 plastic wedges
onto the rear ventilation cover
as illustrated in the figure.
3.3 Electrical connection
Connect the product to a grounded
outlet protected by a fuse
complying with the values in the
rating plate. Our company shall
not be liable for any damages that
will arise when the product is used
without grounding in accordance
with the local regulations.
• Electrical connection
must comply with national
regulations.
• Power cable plug must be within
easy reach after installation.

11
CZ
SK
PL
• The voltage and allowed fuse or
breaker protection are specified
in the Rating Plate which is
affixed to interior of the product.
If the current value of the fuse
or breaker in the house does
not comply with the value in the
rating plate, have a qualified
electrician install a suitable
fuse.
• The specified voltage must be
equal to your mains voltage.
• Do not make connections via
extension cables or multi-plugs.
B
WARNING: Damaged
power cable must
be replaced by the
Authorised Service
Agents.
B
WARNING: If the
product has a failure, it
should not be operated
unless it is repaired by
the Authorised Service
Agent! There is the risk of
electric shock!
To adjust the doors vertically,
Loosen the fixing nut located at the
bottom.
Rotate the adjusting nut according to
the position of the door (clockwise/
counter-clockwise).
Tighten the fixing nut in order to fix
the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the
top.
Rotate the side adjusting nut
according to the position of the door
(clockwise/counter-clockwise).
Tighten the fixing nut which is at the
top in order to fix the position.
adjusting nut
fixing nut
fixing nut
adjusting nut

12
3.4 *Adjusting the stands
If the product is not in balanced position,
adjust the front adjustable stands by rotating
right or left.
*If your product does not have a wine
compartment or is not a glass door, your
product does not have adjustable stands,
the product has fixed stands.
-Upper hinge group is fixed with 3
screws.
-The hinge cover is attached after the
sockets are installed.
- Then the hinge cover is fixed with two
screws.
3.5 Water connection
Depending on the model of the
refrigerator, you can connect it
either to a demijohn or water
mains. First you must connect the
water hose to the refrigerator.
CIn cases where a
demijohn is used, a
separate pump must also
be used.
AWARNING: Refrigerator
and the pump, if any,
must be unplugged
during connection.
C
Following parts may not
be supplied with your
product since they are not
required when using a
demijohn.
Check that following part have been
delivered together with the product:
External water filter. (If there is
a demijohn connection; it is not
necessary to use a water filter.)

13
CZ
SK
PL
3.5.1 Before Installation
Make sure that you have everything
necessary to ensure proper installation
before proceeding, including:
Your product comes with an internal
water filter for use inside the
fridge. Part number of the filter is
4918450200 and you can use this part
number when ordering replacement
filters.
CNormally, you are not
required to tighten
the union with a tool.
However, you can use
a spanner or pliers to
tighten the union if there
is a leakage.
3.7 Connecting the water
line to the water supply
Connect the water line to a
water supply valve. If a valve is
not present or you are not sure,
consult a qualified plumber.
3.6 Connecting the water
hose to the refrigerator
1. Slip the union (B) onto
the water hose (A).
2. Push the water hose
downwards rmly to slip it onto
the water inlet valve (C).
3. Tighten the union (C) by
hand to secure it onto the water
inlet valve.

14
4 Preparation
4.1 Things to be done
for saving energy
A
Connecting your refrigerator
to systems that save energy
is dangerous as they may
cause damage on the
product.
• For a freestanding appliance;
‘this refrigerating appliance is not
intended to be used as a built-in
appliance’ .
• Do not leave the doors of your
refrigerator open for a long time.
• Do not put hot food or drinks in
your refrigerator.
• Do not overload the refrigerator.
Cooling capacity will fall when the
air circulation in the refrigerator is
hindered.
• Do not place the refrigerator in
places subject to direct sunlight.
Install the product at least 30 cm
away from heat sources such as
hobs, ovens, heater units and
stoves and at least 5 cm away from
electrical ovens.
• Pay attention to store your food in
refrigerator in closed containers.
• To be able store maximum food in
the freezer compartment of your
refrigerator, the upper drawer has
to be removed and placed on top
of glass shelf. Power consumption
stated for your refrigerator has
been determined after removing
the icematic and the upper drawers
as to allow maximum loading. It is
strongly recommended to use the
lower drawers in the freezer and
the multizone compartment while
loading.
• Airflow should not be blocked by
placing foods in front of the freezer
and the multizone compartment
fans. Foods should be loaded by
leaving minimum 5 cm space in
front of the protective fan grid.
• Thawing the frozen foods in the
fridge compartment both saves
energy and reserves the quality of
the foods.
• Since hot and humid air will
not directly penetrate into your
product when the doors are
not opened, your product will
optimize itself in conditions
sufficient to protect your food.
In this energy saving function,
functions and components such
as compressor, fan, heater,
defrost, lighting, display and so
on will operate according to the
needs to consume minimum
energy while maintaining the
freshness of your foodstuff.
CTemperature of the room
where your refrigerator
is located should at least
be 10ºC /50°F. Operating
your refrigerator under
cooler conditions is not
recommended with regard
to its efficiency.
CInside of your refrigerator
must be cleaned
thoroughly.
CIf two coolers are to be
installed side by side,
there should be at least
4 cm distance between
them.

15
CZ
SK
PL
4.3 Initial use
Before using the product, make
sure that all preparations have
been made in accordance with
the instructions given in the
“Important instructions regarding
safety and environment” and
“Installation” chapters.
• Clean the interior of the
refrigerator as recommended in
the “Maintenance and cleaning”
section. Before you start the
refrigerator, make sure that the
interior is dry.
• Plug the refrigerator in a grounded
socket. The interior illumination is
lit when the door of the refrigerator
is opened.
• Operate the refrigerator for 6 hours
without placing any food in it and
do not open its door unless it is
necessary.
CYou will hear a noise
when the compressor
starts up. The liquids and
gases sealed within the
refrigeration system may
also give rise to noise,
even if the compressor
is not running and this is
quite normal.
CFront edges of the
refrigerator may feel
warm. This is normal.
These areas are designed
to be warm to avoid
condensation.
4.2 Recommendations
about the fresh food
compartment
• Make sure that the food does not
touch the temperature sensor in
fresh food compartment. To allow
the fresh food compartment to
keep its ideal storage temperature,
the sensor must not be hindered
by food.
• Do not place hot foods or
beverages inside the product.

16
5. Operating the product
C
Figures in this user manual are schematic and may not match
the product exactly. If the subject parts are not included in the
product you have purchased, then those parts are valid for other
models.
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
12 3 45 *6 9 10 11
12
*13
14
15
16
*17
*18
19
20
27
*28
29
30
31
32
33
*34.1*34.2
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
7*8
*22 21
23
24
*25
26
5.1 Indicator panel
Touch-control indicator panel allows you to set the temperature and
control the other functions related to the product without opening the
door of the refrigerator. Just press the relevant buttons for function
settings.

17
CZ
SK
PL
6. Filter reset icon
This icon turns on when the filter
needs to be reset.
7. Temperature change cabin icon
Indicates the cabin whose
temperature is to be changed. When
the temperature change cabin icon
starts flashing, it is understood that
the relevant cabin has been selected.
8. Joker freezer icon
Hover over the Joker freezer icon
using the FN button; the icon will start
to flash. When you press the OK key,
joker cabin freezer icon turn on and
operates as a freezer.
9. Freezer compartment
temperature indicator
Temperature of the fridge
compartment is shown; it can be set
to -18, -19, -20, -21, -22, -23, -24.
10. Quick freeze function indicator
It turns on when the quick freeze
function is activated.
11. Fahrenheit indicator
It is a Fahrenheit indicator. When the
Fahrenheit indication is activated, the
temperature set values are shown
in Fahrenheit and the relevant icon
turns on.
12. Quick freeze function button
Press this button to activate or
deactivate the quick freeze function.
When you activate the function, the
freezer compartment will be cooled
to a temperature lower than the set
value.
1. Quick cooling function indicator
It turns on when the quick fridge
function is activated.
2. Fridge compartment
temperature indicator
Temperature of the fridge
compartment is shown; it can be
set to 8,7,6,5,4,3,2,1.
3. Fahrenheit indicator
It is a Fahrenheit indicator. When the
Fahrenheit indication is activated, the
temperature set values are shown in
Fahrenheit and the relevant icon turns
on.
4. Key lock
Press key lock button simultaneously
for 3 seconds. Key lock symbol
will light up and key lock mode will
be activated. Buttons will not function
if the Key lock mode is active. Press
key lock button simultaneously for 3
seconds again. Key lock symbol will
turn off and the key lock mode will be
exited.
Press the key lock button if you
want to prevent changing of
the temperature setting of the
refrigerator.
5. Power failure/High temperature / error
warning
This indicator illuminates during
power failure, high temperature
failures and error warnings. During
long-term power failures, the highest
temperature value that the freezer
compartment reaches will blink on the
digital display. After checking the food
located in the freezer compartment,
press the alarm off button to clear the
warning.
Please refer to "solutions
recommended for troubleshooting"
section on your manual if you observe
that this indicator is illuminated.