Grundig GSNE 107E20FXRN User manual

GSNE 107E20FN - GSNE 107E20FXN - GSNE 107E20FXRN
GSNE 107E40XN - GSNE 107E40 N - GSNR10740XN
GSNR10740N - GSN 10740XRN
58 4510 0000/AF
1/2
EN / DA / SV / NO /
Refrigerator
User Manual
Køleskab
Brugervejledning
Kylskåp
Bruksanvisning
Kjøleskap
Bruksanvisning

3
A
SV
NO
FIN
Contents
1- Safety Instructions 5
A 1.1 - Intended Use ...............5
A 1.2 - Safety for children,
vulnerable persons and pets .......5
A 1.3 - Electrical safety ..........6
A 1.4 - Transportation safety .6
A 1.5 - Installation safety .......6
A 1.6- Operational safety .......8
A 1.7- Maintenance and
cleaning safety ............................10
A 1.8- HomeWhiz ..................10
A 1.9- Lighting ......................10
2- Environment instructions 11
2.1. Compliance with the WEEE
Directive and Disposing of the
Waste Product: ..........................11
2.2. Compliance with RoHS
Directive ......................................11
2.3. Package information.........11
3. Your Refrigerator 12
4. Installation 13
4.1 Appropriate installation
location .......................................13
4.4 Illumination lamp ..............14
4.2 Installing the plastic
wedges ........................................14
4.3 Electrical connection ........ 14
5 Preparation 15
5.1. Things to be done for energy
saving ..........................................15
5.2. Initial use ...........................15
6. Operating the product 17
6.1 Indicator panel ..................17
6.2 Using interior
compartments ............................19
6.3 Cooling ..............................19
Placing the food ..........................19
6.4 Humidity controlled
crisper .........................................20
7. Maintenance and cleaning 21
7.1 Avoiding bad odours..........21
7.2 Protecting the plastic
surfaces ..................................... 22
8. Troubleshooting 23

4
Please read this manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants
and checked under the most meticulous quality control procedures, will
provide you an effective service
For this, we recommend you to carefully read the entire manual of your
product before using it and keep it at hand for future references.
The user manual will help you use the product in a fast and safe way.
Will help you use your appliance in a fast and safe way.
Read the manual before installing and operating your product.
Follow the instructions, especially those for safety.
Keep the manual in an easily accessible place as you may need it later.
Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
CImportant information
or useful usage tips.
A
Warning against
dangerous conditions
for life and property.
BWarning against
electric voltage.
Packaging materials
of the product are
manufactured from
recyclable materials
in accordance with our
National Environment
Regulations.

5
A
SV
NO
FIN
1- Safety Instructions
• This section contains safety
instructions that will help
get protected against risks of
personal injury or property
damage.
• Our company shall not be
responsible for damages
that may arise when these
instructions are not followed.
A Installation and repair
procedures must always be
performed by the manufacturer,
authorised service agent or a
qualified person specified by the
importer.
A Only use original parts and
accessories.
A Do not repair or replace any
part of the product unless specified
expressly in the user manual.
A Do not make any technical
modifications to the product.
A 1.1 - Intended Use
• This product is not suitable for
commercial use and it must not be
used out of its intended use.
This product is designed to be used
in houses and indoor places.
For example:
- Personnel kitchens in stores,
offices and other working environ-
ments,
- Farm houses,
- Areas used by customers at
hotels, motels and other types of
accommodation,
- Bed&breakfast type hotels, boar-
dinghouses,
- Catering and similar non-retail
applications.
This product should not be used
outdoors with or without a tent
above it such as boats, balconies or
terraces. Do not expose the pro-
duct to rain, snow, sun or wind.
There is the risk of fire!
A 1.2 - Safety for child-
ren, vulnerable per-
sons and pets
• This product can be used
by children at and above 8
years old and by persons
with limited physical, sensory
or mental capabilities or
who lack experience and
knowledge provided that they
are supervised or trained on the
safe use of the product and the
risks it brings out.
• Children aged from 3 to 8 years
are allowed to load and unload
refrigerating products.
• Electrical products are
dangerous for children and pets.
Children and pets must not play
with, climb or enter the product.
• Cleaning and user maintenance
should not be performed
by children unless they are
supervised by someone.
• Keep packaging materials away
from children. There is the risk
of injury and suffocation!
• Before disposing of the old or
obsolete product:
1. Unplug the product by grip-
ping from the plug.
2. Cut the power cable and

6
remove it from the applian-
ce together with its plug
3. Do not remove the shelves
or drawers so that it is
harder for children to enter
the product.
4. Remove the doors.
5. Keep the product in a way
that it will not tip over.
6. Do not allow children play
with the old product.
• Never throw the product into fire
for disposal. There is the risk of
explosion!
• If there is a lock on the door of
the product, the key should be
kept out of the reach of children.
A 1.3 - Electrical safety
• The product must be
unplugged during installation,
maintenance, cleaning,
repairing and moving
procedures.
• If the power cable is damaged,
it must be replaced by a
qualified person specified by
the manufacturer, authorised
service agent or importer in
order to avoid potential dangers.
• Do not squeeze the power cable
under or behind the product. Do
not place heavy objects on the
power cable. Power cable must
not be bent excessively, pinched
or get in contact with any heat
source.
• Do not use extension cords,
multi-sockets or adapters to
operate the product.
• Portable multi-sockets or
portable power sources can
overheat and cause fire.
Therefore, do not keep any
multi-sockets behind or near
the product.
• Plug must be easily accessible.
If this is not possible, the
electrical installation to which
the product is connected must
contain a device (such as a fuse,
switch, circuit breaker, etc.)
which conforms to the electrical
regulations and disconnects all
poles from the grid.
• Do not touch the power plug
with wet hands.
• Remove the plug from the
socket by gripping the plug and
not the cable.
A 1.4 - Transportation safety
• Product is heavy; do not move it
alone.
• Do not hold its door when
moving the product.
• Pay attention not to damage
the cooling system or the
piping during transportation. If
the piping is damaged, do not
operate the product and call the
authorised service agent.
A 1.5 - Installation safety
• Call the authorised service
agent for installation of the
product. To make the product
ready for use, check the
information in the user manual

7
A
SV
NO
FIN
to make sure that the electricity
and water installations are
suitable. If they are not, call
a qualified electrician and
plumber to have the necessary
arrangements made. Otherwise,
there is the risk of electric
shock, fire, problems with the
product, or injury!
• Prior to installation, check if the
product has any defects on it. If
the product is damaged, do not
have it installed.
• Place the product on a clean,
flat and solid surface and
balance it with adjustable feet.
Otherwise, the product may tip
over and cause injuries.
• The installation location must be
dry and well ventilated. Do not
place carpets, rugs or similar
covers under the product.
Insufficient ventilation causes
the risk of fire!
• Do not cover or block the
ventilation openings. Otherwise,
power consumption increases
and your product may get
damaged.
• Product must not be connected
to supply systems such as solar
power supplies. Otherwise, your
product may get damaged due
to sudden voltage changes!
• The more refrigerant a
refrigerator contains, the
larger the installation location
must be. If the installation
location is too small, flammable
refrigerant and air mixture
will accumulate in cases of
refrigerant leakage in cooling
system. The required space
for each 8 gr of refrigerant is
1 m³ minimum. The amount of
refrigerant in your product is
indicated on the Type Label.
• Product must not be installed
in places exposed to direct
sunlight and it must be kept
away from heat sources such as
hobs, radiators, etc.
If it is inevitable to install the
product close to a heat source, a
suitable insulation plate must be
used in between and the following
minimum distances must be kept
to the heat source:
- Minimum 30 cm away from
heat sources such as hobs, ovens,
heater units or stoves,
- Minimum 5 cm away from
electric ovens.
• Protection class of your product
is Type I. Plug the product in a
grounded socket that conforms
the voltage, current and
frequency values stated on the
type label of the product. The
socket must be equipped with
a 10 A – 16 A circuit breaker.
Our company shall not be
liable for any damages that will
arise when the product is used
without grounding and electrical
connection in accordance
with the local and national
regulations.
• Product must not be plugged in
during installation. Otherwise,
there is the risk of electric
shock and injury!
• Do not plug the product
in sockets that are loose,
dislocated, broken, dirty, greasy
or bear the risk of getting in
contact with water.
• Route the power cable and
hoses (if any) of the product in a

8
way that they do not cause risk
of tripping over.
• Exposing the live parts or power
cable to humidity may cause
short circuit. Therefore, do not
install the product in places
such as garages or laundry
rooms where humidity is high
or water may splash. If the
refrigerator gets wet with water,
unplug it and call the authorised
service agent.
• Never connect your refrigerator
to energy saving devices. Such
systems are harmful to your
product.
A 1.6- Operational safety
• Never use chemical solvents on
the product. There is the risk of
explosion!
• If the product malfunctions,
unplug it and do not operate
until it is repaired by the
authorised service agent. There
is the risk of electric shock!
• Do not place flame sources (lit
candles, cigarettes, etc.) on or
close to the product.
• Do not climb on the product.
There is the risk of falling and
getting injured!
• Do not damage the pipes of
the cooling system with sharp
or penetrating objects. The
refrigerant that might come out
when the refrigerant pipes, pipe
extensions or surface coatings
are punctured causes skin
irritations and eye injuries.
• Unless recommended by the
manufacturer, do not place or
use electrical devices inside the
refrigerator/deep freezer.
• Be careful not to trap your
hands or any other part of your
body in the moving parts inside
the refrigerator. Pay attention
not to squeeze your fingers
between the door and the
refrigerator. Be careful when
opening and closing the door
particularly if there are children
around.
• Never eat ice cream, ice
cubes or frozen food right
after removing them from the
refrigerator. There is the risk of
frostbite!
• When your hands are wet, do
not touch the inner walls or
metal parts of the freezer or the
food stored therein. There is the
risk of frostbite!
• Do not place tins or bottles that
contain carbonated drinks or
freezable liquids in the freezer
compartment. Tins and bottles
may burst. There is the risk of
injury and material damage!
• Do not place or use flammable
sprays, flammable materials,
dry ice, chemical substances or
similar heat-sensitive materials
near the refrigerator. There is
the risk of fire and explosion!
• Do not store explosive materials
that contain flammable
materials, such as aerosol cans,
in your product.
• Do not place containers filled
with liquid onto the product.
Splashing water on an electrical
part may cause electric shock or
the risk of fire.
• This product is not intended
for storing medicines, blood
plasma, laboratory preparations

9
A
SV
NO
FIN
or similar medical substances
and products subject to Medical
Products Directive.
• Using the product against its
intended purpose may cause
the products stored inside it to
deteriorate or spoil.
• If your refrigerator is equipped
with blue light, do not look
at this light with optical
tools. Do not stare at UV LED
lamp directly for a long time.
Ultraviolet light may cause eye
strain.
• Do not overload the product.
Objects in the refrigerator
may fall down when the door
is opened, causing injury or
damage. Similar problems may
arise if any object is placed onto
the product.
• To avoid injuries, make sure that
you have cleaned all the ice and
water that may have fallen or
splashed on the floor.
• Change the position of the
shelves/bottle holders on the
door of your refrigerator only
when they are empty. There is
the risk of injury!
• Do not place objects that can fall
down/tip over onto the product.
Such objects may fall down
when the door is opened and
cause injuries and/or material
damage.
• Do not hit or exert excessive
force on glass surfaces. Broken
glass may cause injuries and/or
material damage.
• Cooling system of your product
contains R600a refrigerant:
Type of the refrigerant used
in the product is indicated on
the type label. This refrigerant
is flammable. Therefore, pay
attention not to damage the
cooling system or the piping
while the product is in use. If the
piping is damaged:
- Do not touch the product or
the power cable,
- Keep away potential sources
of fire that may cause the product
to catch fire.
- Ventilate the area where the
product is located. Do not use fans.
- Call the authorised service
agent.
• If the product is damaged and
you see refrigerant leak, please
stay away from the refrigerant.
Refrigerant may cause frostbite
in case of skin contact.
For products with a Water
Dispenser/Ice Machine
• Use only potable water. Do
not fill the water tank with
any liquids -such as fruit
juice, milk, carbonated
beverages or alcoholic
drinks- that are not
suitable for use in the water
dispenser.
• There is the risk for health
and safety!
• Do not allow children play
with the water dispenser or
ice machine (Icematic) in
order to prevent accidents or
injuries.
• Do not insert your fingers
or other objects into the
water dispenser hole, water
channel or ice machine
container. There is the risk of
injury or material damage!

10
A 1.7- Maintenance and
cleaning safety
• Do not pull from the door handle
if you need to move the product
for cleaning purposes. Handle
may break and cause injuries if
you exert excessive force on it.
• Do not spray or pour water on or
inside the product for cleaning
purposes. There is the risk of
fire and electric shock!
• Do not use sharp or abrasive
tools when cleaning the
product. Do not use household
cleaning products, detergent,
gas, gasoline, thinner, alcohol,
varnish etc.
• Only use cleaning and
maintenance products inside
the product that are not harmful
for food.
• Never use steam or steam
assisted cleaners to clean or
defrost the product. Steam gets
into contact with the live parts in
your refrigerator, causing short
circuit or electric shock!
• Make sure that no water enters
the electronic circuits or lighting
elements of the product.
• Use a clean and dry cloth to
wipe the foreign materials or
dust on the pins of the plug. Do
not use a wet or damp cloth to
clean the plug. There is the risk
of fire and electric shock!
A 1.8- HomeWhiz
• When you operate your product
through HomeWhiz application,
you must observe the safety
warnings even when you are
away from the product. You
must also follow the warnings in
the application.
A 1.9- Lighting
• Call the authorised service
when it is required to replace
the LED/bulb used for lighting.

11
A
SV
NO
FIN
2.1.Compliance with the
WEEE Directive and Disposing
of the Waste Product:
This product complies with EU
WEEE Directive (2012/19/EU).
This product bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This symbol indicates that
this product shall not be
disposed with other
household wastes at the
end of its service life. Used
device must be returned to offical
collection point for recycling of
electrical and electronic devices.
To find these collection systems
please contact to your local
authorities or retailer where the
product was puchased. Each
household performs important role
in recovering and recycling of old
appliance. Appropriate disposal of
used appliance helps prevent
potential negative consequences
for the environment and human
health.
2.2.Compliance with
RoHS Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
2.3.Package information
Packaging materials of the
product are manufactured
from recyclable materials
in accordance with our
National Environment Regulations.
Do not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by the
local authorities.
2- Environment instructions

12
C
Figures in this user manual are schematic and may not
match the product exactly. If the subject parts are not
included in the product you have purchased, then those parts
are valid for other models.
3. Your Refrigerator
1. Indicator panel
2. Butter & Cheese sections
3. Adjustable door shelves
4. Bottle shelves
5. Shelter wire
6. Adjustable front feet
7. Crispers
8. Chiller
9. Chiller cover and glass
10. Movable shelves
11. Wine cellar
12. Fan
1
2
5
3
4
7
8
9
11
10
12
6

13
A
SV
NO
FIN
4. Installation
Refer to the nearest Authorised
Service Agent for installation of
the product. To make the product
ready for use, make sure that
the electricity installation is
appropriate before calling the
Authorised Service Agent. If not,
call a qualified electrician to have
any necessary arrangements
carried out.
C
Preparation of the
location and electrical
installation at the place
of installation is under
customer's responsibility.
B
Product must not be
plugged in during
installation. Otherwise,
there is the risk of death
or serious injury!
B
WARNING: Installation
and electrical connections
of the product must
be carried out by the
Authorised Service Agent.
Manufacturer shall not be
held liable for damages
that may arise from
procedures carried out by
unauthorised persons.
A
WARNING: Prior to
installation, visually
check if the product has
any defects on it. If so,
do not have it installed.
Damaged products cause
risks for your safety.
C
Make sure that the power
cable is not pinched or
crushed while pushing
the product into its place
after installation or
cleaning procedures.
4.1 Appropriate
installation location
A
WARNING: If the door
of the room where the
product will be placed
is too small for the
product to pass, then the
product's doors must be
removed and the product
must be turned aside to
pass it through.
• Choose a place at where
you would use the product
comfortably.
• Install the product at least 30
cm away from heat sources
such as hobs, ovens, heater
cores and stoves and at least 5
cm away from electrical ovens.
Product must not be subjected
to direct sun light and kept in
humid places after installation.
• Appropriate air ventilation must
be provided around your product
in order to achieve an efficient
operation. If the product is to be
placed in a recess in the wall,
pay attention to leave at least 5
cm distance with the ceiling and
side walls.
• Do not place the product on
the materials such as rugs or
carpets.
• Place the product on an even
floor surface to prevent jolts.
• Your product can operate in
ambinet temperatures between
5°C to +43°C.

14
4.4 Illumination lamp
Do not attempt to repair yourself
but call the Authorised Service
Agent if the LED illumination
lamps do not go on or are out of
order.
C
If two coolers are to be
installed side by side,
there should be at least
4 cm distance between
them.
4.2 Installing the
plastic wedges
Plastic wedges are used to create
the distance for the air circulation
between the product and the rear
wall. Insert the 2 plastic wedges
onto the rear ventilation cover as
illustrated in the figure. To install
the wedges, remove the screws
on the product and use the screws
given in the same pouch with the
wedges.
4.3 Electrical connection
Connect the product to a grounded
outlet protected by a fuse
complying with the values in the
rating plate. Our company shall
not be liable for any damages that
will arise when the product is used
without grounding in accordance
with the local regulations.
• Electrical connection
must comply with national
regulations.
• Power cable plug must be within
easy reach after installation.
• The voltage and allowed fuse or
breaker protection are specified
in the Rating Plate which is
affixed to interior of the product.
If the current value of the fuse
or breaker in the house does
not comply with the value in the
rating plate, have a qualified
electrician install a suitable
fuse.
• The specified voltage must be
equal to your mains voltage.
• Do not make connections via
extension cables or multi-plugs.
B
WARNING: Damaged
power cable must
be replaced by the
Authorised Service
Agents.
B
WARNING: If the
product has a failure, it
should not be operated
unless it is repaired by
the Authorised Service
Agent! There is the risk of
electric shock!

15
A
SV
NO
FIN
5 Preparation
5.1. Things to be done
for energy saving
A
Connecting the product
to electric energy saving
systems is risky as it may
cause damage on the
product.
• For a freestanding appliance;
‘this refrigerating appliance is
not intended to be used as a
built-in appliance.
• Do not leave the doors of your
refrigerator open for a long
time.
• Do not put hot food or drinks in
your refrigerator.
• Do not overload the refrigerator.
Cooling capacity will fall when
the air circulation inside is
hindered.
• Do not place the refrigerator in
places subject to direct sunlight.
Install the product at least 30
cm away from heat sources
such as hobs, ovens, heater
cores and stoves and at least 5
cm away from electrical ovens.
• Pay attention to store your
food in refrigerator in closed
containers.
• You can load maximum
amount of food to the freezer
compartment of the refrigerator
by removing the freezer
compartment drawers. Declared
energy consumption value of
the refrigerator was determined
with the freezer compartment
drawers removed,except if
available bottom drawer and
with maximum amount of food
loaded. There is no risk in using
a shelf or drawer suitable for
the shapes and sizes of the
foods to be frozen.
• Thawing frozen food in fridge
compartment will both provide
energy saving and preserve the
food quality.
CThe ambient temperature
of the room where you
install the refrigerator
should at least be
5°C. Operating your
refrigerator under colder
conditions than this is not
recommended.
CInside of your refrigerator
must be cleaned
thoroughly.
CIf two coolers are to be
installed side by side,
there should be at least
4 cm distance between
them.
5.2. Initial use
Before starting to use the product,
check that all preparations are
made in accordance with the
instructions in sections "Important
instructions for safety and
environment" and "Installation".
• Clean the interior of the
refrigerator as recommended in
the “Maintenance and cleaning”
section. Check that inside of it is
dry before operating it.
• Plug the refrigerator into the
grounded wall outlet. When
the door is opened the interior
illumination will turn on.

16
• Run the refrigerator without putting
any food for 6 hours and do not open
its door unless certainly required.
CYou will hear a noise
when the compressor
starts up. The liquids and
gases sealed within the
refrigeration system may
also give rise to noise,
even if the compressor
is not running and this is
quite normal.
CFront edges of the
refrigerator may feel
warm. This is normal.
These areas are designed
to be warm to avoid
condensation.
CFor energy efficiency, it
is recommmended to
remove top shelf and
load food on the shelf
below.Net volume of your
appliance is declared
without top two flaps and
the top shelf in place.
Place two ice pack ( if
provided ) directly on the
top of frozen food to be
stored on top shelf.
C Since hot and humid air
will not directly penetrate
into your product when
the doors are not opened,
your product will optimize
itself in conditions
sufficient to protect your
food. Functions and
components such as
compressor, fan, heater,
defrost, lighting, display
and so on will operate
according to the needs
to consume minimum
energy under these
circumstances.
1 1113
2
53 7
4
6 8109 14
12

17
A
SV
NO
FIN
6. Operating the product
6.1 Indicator panel
1. On/Off Function:
This function allows you to make
the Fridge turn off when pressed
for 3 seconds.The fridge could
be turned on by pressing On/Off
button for 3 seconds again .
2. On/Off Indicator:
This icon come on when the fridge
is turned off. All the other icons
turn off.
3. Quick Fridge Function:
Quick Fridge indicator turns on
when the Quick Fridge function
is on. Press Quick Fridge button
again to cancel this function. Quick
Fridge indicator will turn off and
normal settings will be resumed.
Quick Fridge function will be
cancelled automatically
1 hours later if you do not cancel it
manually. If you want to cool plenty
amount of fresh food, press Quick
Fridge button before you place the
food into the fridge compartment.
4. Quick Fridge Indicator :
This icon comes on when the Quick
Fridge function is on.
5. Fridge Set Function:
This function allows you to
make the Fridge compartment
temperature setting. Press this
button to set the temperature
of the fridge compartment to
8,7,6,5,4,3 and 2 respectively.
6. Fridge Compartment
Temperature Setting Indicator:
Indicates the temperature set for
the Fridge Compartment.
7. Vacation Function:
When you press Vacation button,
vacation function is activated and
vacation indicator lights. You can
use this function when you will
1 1113
2
5
3 7
4
68109 14
12

18
not use your fridge for a long
time. Note that there should be no
food inside your fridge, otherwise
fridge can not preserve your food
at Vacation mode. If this function
is activated, fridge compartment
temperature is kept at 15 C° in
order to prevent bad smelling.
Press Vacation button again to
deactivate vacation function.
8. Vacation Indicator:
This icon lights up when the
Vacation Function is active.
9. Power Failure / High
temperature / Error status
indicator : (optional)
This indicator ( ) illuminates
in case of power failure, high
temperature and error warnings.
When the temperature of the
freezer compartment is heated
up to a critical level for the frozen
food, the maximum value reached
by the freezer compartment
temperature flashes on the digital
indicator.
Check the food in the freezer
compartment.
This is not a malfunction. The
warning may be deleted by
pressing any button or on high
temperature alarm off button.
(Cancelling by pressing any button
is not applicable for every model.)
This indicator ( ) illuminated
when a sensor failure occurs, too.
When this indicator is illuminated,
“E” and figures such as “1,2,3...”
are displayed alternatively on
the temperature indicator. These
figures on the indicator inform the
service personnel about the error.
10. Economic Usage Indicator:
This icon comes on when the
Fridge Compartment is set to 8°C
which is the most economical set
value. Economic Usage Indicator
turns off when the Quick Fridge or
Quick Freeze function is selected.
11.Termination of the High
Temperature Warning:
(optional)
In case of power failure/high
temperature warning, you may
delete the warning ( ) by
pressing any button on the
indicator or high temperature
alarm off button for 1 second
after checking the food inside the
freezer compartment.
Note: Cancelling by pressing any
button is not applicable for every
model.
12.Energy Saving Indicator :
(optional)
This icon (“-“) lights up when the
Energy Saving Function is selected.
12.2.Energy Saving Indicator :
(optional)
If the product doors are kept
closed for a long time energy
saving function is automatically
activated and energy saving symbol
is illuminated. When energy saving
function is activated, all symbols
on the display other than energy
saving symbol will turn off. When
the Energy Saving function is
activated, if any button is pressed
or the door is opened, energy
saving function will be canceled
and the symbols on display will
return to normal.

19
A
SV
NO
FIN
6.2 Using interior
compartments
Body shelves: Distance between
the shelves can be adjusted when
necessary.
Crisper: Vegetables and fruits can
be stored in this compartment for
long periods without decaying.
Bottle shelf: Bottles, jars and tins
can be placed in these shelves.
6.3 Cooling
Food storage
The fridge compartment is for the
short-term storage of fresh food
and drinks.
Store milk products in the intended
compartment in the refrigerator.
Bottles can be stored in the bottle
holder or in the bottle shelf of the
door.
Raw meat is best kept in
a polyethylene bag in the
compartment at the very bottom of
the refrigerator.
Allow hot foods and beverages to
cool to room temperature prior to
placing them in the refrigerator.
• Attention
Store concentrated alcohol only
standing upright and tightly closed.
• Attention
Do not store explosive substances or
containers with flammable propellant
gases (canned cream, spray cans
etc.) in the device. There is a danger
of explosion.
Placing the food
Egg tray Egg
Fridge
compartment
shelves
Food in pans,
covered plates
and closed
containers
Fridge
compartment
door shelves
Small and
packaged food
or drinks (such
as milk, fruit
juice and beer)
Crisper Vegetables and
fruits
Defrosting of the appliance
The appliance defrosts automatically.
13. Key Lock Mode:
Press Key Lock button
concurrently for 3 seconds. Key
lock icon will light up and key lock
mode will be activated. Buttons will
not function if the Key Lock mode
is active. Press Key Lock button
con-currently for 3 seconds again.
Key lock icon will turn off and the
key lock mode will be exited.
14. Key Lock Indicator:
This icon lights up when the Key
Lock mode is activated.

20
6.4 Humidity controlled crisper
(everfresh)
(This feature is optional)
Humidity rates of the vegetables
and fruit are kept under control
with the feature of humidity-
controlled crisper and the food is
ensured to stay fresh for longer.
We recommend you to place the
leafy vegetables such as lettuce,
spinach and the vegetables which
are sensitive to humidity loss, in
a horizontal manner as much as
possible inside the crisper, not on
their roots in a vertical position.
While the vegetables are being
placed, specific gravity of the
vegetables should be taken into
consideration. Heavy and hard
vegetables should be put at the
bottom of the crisper and the
lightweight and soft vegetables
should be placed over.
Never leave the vegetables
inside the crisper in their bags.
If the vegetables are left inside
their bags, this will cause them
to decompose in a short period
of time. In case contacting with
other vegetables is not preferred
for hygiene concerns, use a
perforated paper and other similar
packaging materials instead of a
bag.
Do not place together the pear,
apricot, peach, etc. and apple in
particular which have a high level
of generation of ethylene gas in
the same crisper with the other
vegetables and fruit. The ethylene
gas which is emitted by these fruit
may cause the other fruit to ripen
faster and decompose in a shorter
time.