Grundig GD-TI-BP1603T User manual

i
Contents
1 Overview.................................................................................................................................2
1.1 Brief Description....................................................................................................................2
1.2 Function .................................................................................................................................2
2 Device Activation and Accessing ..............................................................................................3
2.1 Activate the Device via IP-Finder..........................................................................................3
2.2 Activate the Device via Browser...........................................................................................3
2.3 Login.......................................................................................................................................4
2.3.1 Plug-in Installation .....................................................................................................4
2.3.2 Illegal Login Lock.........................................................................................................5
3 Temperature Measurement.....................................................................................................6
3.1 Notice.....................................................................................................................................6
3.2 Thermography Configuration Flow Chart.............................................................................7
3.3 Automatic Thermography.....................................................................................................8
3.3.1 Set Thermography Parameters..................................................................................8
3.3.2 Set Normal Mode .......................................................................................................9
3.3.3 Set Expert Mode.......................................................................................................10
3.3.4 Set Thermography Rule............................................................................................11
3.3.5 Point Thermography ................................................................................................12
3.3.6 Line Thermography ..................................................................................................12
3.3.7 Area Thermography .................................................................................................13
3.3.8 Set Shielded Region..................................................................................................13
3.4 Manual Thermography........................................................................................................13
4 Fire Source Detection ............................................................................................................14
4.1 Recommended Scene..........................................................................................................14
4.2 Set Fire Detection Parameters............................................................................................14
5 Behavior Analysis ..................................................................................................................16
5.1 Flow Chart of Behavior Analysis .........................................................................................16
5.2 Set VCA Parameters ............................................................................................................17
5.3 Calibration ...........................................................................................................................17

ii
5.3.1 Calibrate Automatically ...........................................................................................17
5.3.2 Calibrate Manually...................................................................................................18
5.3.3 Verify the Calibration Result....................................................................................19
5.4 Set Rules ..............................................................................................................................19
5.5 Advanced Configuration......................................................................................................21
6 Event and Alarm....................................................................................................................23
6.1 Set Motion Detection..........................................................................................................23
6.1.1 Normal Mode ...........................................................................................................23
6.1.2 Expert Mode.............................................................................................................24
6.2 Set Video Tampering Alarm................................................................................................25
6.3 Set Alarm Input....................................................................................................................26
6.4 Set Exception Alarm ............................................................................................................27
6.5 Detect Audio Exception.......................................................................................................27
7 Arming Schedule and Alarm Linkage......................................................................................29
7.1 Set Arming Schedule ...........................................................................................................29
7.2 Linkage Method Settings.....................................................................................................29
7.2.1 Trigger Alarm Output ...............................................................................................29
7.2.2 FTP/NAS/Memory Card Uploading .........................................................................30
7.2.3 Send Email ................................................................................................................31
7.2.4 Notify Surveillance Center .......................................................................................32
7.2.5 Trigger Recording .....................................................................................................32
7.2.6 Set Audible Alarm Output........................................................................................32
7.2.7 Set Flashing Alarm Light Output..............................................................................33
8 Live View...............................................................................................................................34
8.1 Live View Parameters..........................................................................................................34
8.1.1 Window Division ......................................................................................................34
8.1.2 Live View Stream Type.............................................................................................34
8.1.3 Enable and Disable Live View ..................................................................................34
8.1.4 Start Digital Zoom ....................................................................................................34
8.1.5 View Previous/Next Page ........................................................................................34
8.1.6 Full Screen.................................................................................................................35

iii
8.1.7 Light ..........................................................................................................................35
8.1.8 Wiper ........................................................................................................................35
8.1.9 Lens Initialization .....................................................................................................35
8.1.10 Auxiliary Focus........................................................................................................35
8.1.11 Quick Set Live View ................................................................................................35
8.1.12 Lens Parameters Adjustment.................................................................................36
8.2 Set Transmission Parameters .............................................................................................36
9 Video and Audio....................................................................................................................38
9.1 Video Settings......................................................................................................................38
9.1.1 Stream Type..............................................................................................................38
9.1.2 Video Type................................................................................................................38
9.1.3 Resolution.................................................................................................................38
9.1.4 Bitrate Type and Max. Bitrate .................................................................................39
9.1.5 Video Quality............................................................................................................39
9.1.6 Frame Rate ...............................................................................................................39
9.1.7 Video Encoding.........................................................................................................39
9.1.8 Smoothing.................................................................................................................40
9.1.9 Display VCA Info.......................................................................................................40
9.1.10 Audio Settings ........................................................................................................41
9.1.11 Two-way Audio.......................................................................................................41
9.1.12 Set ROI ....................................................................................................................42
9.2 Display Settings ...................................................................................................................43
9.2.1 Image Adjustment....................................................................................................43
9.2.2 Image Adjustment (Thermal Channel) ....................................................................43
9.2.3 Exposure Settings.....................................................................................................43
9.2.4 Day/Night Switch .....................................................................................................43
9.2.5 Set Supplement Light ...............................................................................................44
9.2.6 BLC ............................................................................................................................44
9.2.7 WDR..........................................................................................................................45
9.2.8 White Balance ..........................................................................................................45
9.2.9 DNR...........................................................................................................................45

iv
9.2.10 Defog.......................................................................................................................45
9.2.11 Gray Scale ...............................................................................................................45
9.2.12 Set Palette ..............................................................................................................46
9.2.13 Set Target Color......................................................................................................46
9.2.14 DDE .........................................................................................................................46
9.2.15 Brightness Sudden Change ....................................................................................47
9.2.16 Enhance Regional Image........................................................................................47
9.2.17 Mirror......................................................................................................................47
9.2.18 Video Standard.......................................................................................................47
9.2.19 Digital Zoom ...........................................................................................................47
9.2.20 Scene Mode............................................................................................................47
9.3 OSD ......................................................................................................................................48
9.4 Set Privacy Mask..................................................................................................................48
9.5 Overlay Picture....................................................................................................................49
9.6 Set Manual DPC (Defective Pixel Correction).....................................................................49
9.7 Set Picture in Picture...........................................................................................................50
10 Video Recording and Picture Capture...................................................................................51
10.1 Storage Settings.................................................................................................................51
10.1.1 Set Memory Card ...................................................................................................51
10.1.2 Set NAS ...................................................................................................................51
10.1.3 Set FTP ....................................................................................................................52
10.1.4 Set Cloud Storage ...................................................................................................53
10.2 Video Recording ................................................................................................................53
10.2.1 Record Automatically.............................................................................................53
10.2.2 Record Manually ....................................................................................................55
10.2.3 Playback and Download Video..............................................................................55
10.3 Capture Configuration.......................................................................................................56
10.3.1 Capture Automatically ...........................................................................................56
10.3.2 Capture Manually...................................................................................................56
10.3.3 View and Download Picture ..................................................................................57

v
11 Network Settings.................................................................................................................58
11.1 TCP/IP ................................................................................................................................58
11.1.1 Multicast Discovery................................................................................................59
11.2 Port ....................................................................................................................................59
11.3 Port Mapping.....................................................................................................................60
11.3.1 Set Auto Port Mapping ..........................................................................................60
11.3.2 Set Manual Port Mapping......................................................................................61
11.4 Multicast............................................................................................................................61
11.5 SNMP .................................................................................................................................61
11.6 Access to Device via Domain Name..................................................................................62
11.7 Access to Device via PPPoE Dial Up Connection ..............................................................62
11.8 Enable SCMS Service on Camera ......................................................................................63
11.8.1 Enable SCMS Service via Web Browser.................................................................63
11.8.3 Access Camera via SCMS........................................................................................64
11.9 Set ISUP..............................................................................................................................64
11.10 Set Open Network Video Interface ................................................................................65
11.11 Set Alarm Host.................................................................................................................65
11.12 Set Alarm Server..............................................................................................................65
11.13 Set Network Service........................................................................................................66
11.14 Set SRTP...........................................................................................................................66
12 System and Security ............................................................................................................67
12.1 View Device Information ..................................................................................................67
12.2 Search and Manage Log ....................................................................................................67
12.3 Import and Export Configuration File...............................................................................67
12.4 Export Diagnose Information............................................................................................68
12.5 Reboot ...............................................................................................................................68
12.6 Restore and Default ..........................................................................................................68
12.7 Upgrade .............................................................................................................................68
12.8 View Open Source Software License ................................................................................69
12.9 Time and Date ...................................................................................................................69
12.9.1 Synchronize Time Manually...................................................................................69

vi
12.9.2 Set NTP Server........................................................................................................69
12.9.3 Set DST....................................................................................................................70
12.10 Set RS-232........................................................................................................................70
12.11 Set RS-485........................................................................................................................70
12.12 Set Same Unit ..................................................................................................................71
12.13 Security ............................................................................................................................71
12.13.1 Authentication......................................................................................................71
12.13.2 Security Audit Log ................................................................................................72
12.13.3 Set IP Address Filter .............................................................................................72
12.13.4 Set SSH..................................................................................................................73
12.13.5 Set HTTPS..............................................................................................................73
12.13.6 Set QoS .................................................................................................................74
12.13.7 Set IEEE 802.1X.....................................................................................................74
12.14 User and Account ............................................................................................................75
12.14.1 Set User Account and Permission........................................................................75
13 Appendix.............................................................................................................................76
13.1 Common Material Emissivity Reference ..........................................................................76

1
Introduction
Thank you for purchasing a Grundig product. Before installing or connecting the product, please
read first the following documents which you can find in printed form in the product package:
- Legal Disclaimer
- Safety Instructions
- Installation Manual and/or Quick Guide for the respective product model
Further information about the product like Data Sheets, CE Documents, etc. can also be found on
our Web page www.grundig-security.com.
This User Guide is a manual for IP Cameras. Please see in the table of Model Overview the
applicable models. Please read this User Guide carefully and retain it for future use.
Model Overview
This User Guide is for the following products:
GD-TI-AP1614V
GD-TI-BP1603V
GD-TI-BP1603T
GD-TI-BP1606T
GD-TI-BP1610T

2
1 Overview
1.1 Brief Description
Thermal & Optical Bi-spectrum network camera equipped with built-in GPU which supports
intelligent behavior analysis algorithm, can realize high-precision VCA detection and real-time
alarm. It is applied to perimeter defense and fire-prevention purposes in critical infrastructures
such as community, villa, construction site, factory, 4S stores, and so on. The pre-alarm system
helps you discover unexpected events immediately and protects your property.
1.2 Function
This section introduces main functions of the device.
Note
Not all models support the configurations below, take the actual product for reference.
Fire Detection
Device can detect the dynamic fire source in the scene and output pre-alarm and alarm to protect
the property.
Temperature Measurement
Device can measure the actual temperature of the spot being monitored. The device alarms when
temperature exceeds the temperature threshold value.
VCA
Device can do behavior analysis. Multiple rules can be configured for different requirements.
Smoking Detection
Device can detect the smoking behavior and alarm.

3
2 Device Activation and Accessing
To protect the security and privacy of the user account and data, you should set a login password
to activate the device when access the device via network.
Note
Refer to the user manual of the software client for the detailed information about the client
software activation.
2.1 Activate the Device via IP-Finder
Search and activate the online devices via IP-Finder tool.
Before You Start
Get the IP-Finder tool from the official website www.grundig-security.com to install.
Steps
1. Connect the device to network using the network cable.
2. Run IP-Finder to search the online devices.
3. Check Device Status from the device list, and select Inactive device.
4. Create and input the new password in the password field, and confirm the password.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.
5. Click OK.
Device Status changes into Active.
6. Optional: Change the network parameters of the device in Modify Network Parameters.
2.2 Activate the Device via Browser
You can access and activate the device via the browser.
Steps
1. Connect the device to the PC using the network cables.
2. Change the IP address of the PC and device to the same segment.

4
Note
The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from
192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of
the PC to 192.168.1.100.
3. Input 192.168.1.64 in the browser.
4. Set device activation password.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
5. Click OK.
6. Input the activation password to log in to the device.
7. Optional: Go to Configuration → Network → Basic →TCP/IP to change the IP address of the
device to the same segment of your network.
2.3 Login
Log in to the device via Web browser.
2.3.1 Plug-in Installation
Certain operation systems and web browser may restrict the display and operation of the device
function. You should install plug-in or complete certain settings to ensure normal display and
operation. For detailed restricted function, refer to the actual device.
Operating System
Web Browser
Operation
Windows
Internet Explorer 10+
Follow pop-up prompts to
complete plug-in installation.
Google Chrome 57+
Mozilla Firefox 52+
Click to
download and install plug-in.
Go to Configuration →
Network → Advanced
Settings → Network Service
to enable WebSocket or
WebSockets for normal view if
plug-in installation is not

5
Operating System
Web Browser
Operation
required. Display and
operation of certain functions
are restricted. For example,
Playback and Picture are not
available. For detailed
restricted function, refer to
the actual device.
Mac OS 10.13+
Mac Safari 12+
Plug-in installation is not
required.
Go to Configuration →
Network → Advanced
Settings → Network Service
to enable WebSocket or
WebSockets for normal view.
Display and operation of
certain functions are
restricted. For example,
Playback and Picture are not
available. For detailed
restricted function, refer to
the actual device.
Note
The device only supports Windows and Mac OS system and does not support Linux system.
2.3.2 Illegal Login Lock
It helps to improve the security when accessing the device via Internet.
Go to Configuration → System → Security → Security Service, and enable Enable Illegal Login
Lock. Illegal Login Attempts and Locking Duration are configurable.
Illegal Login Attempts
When your login attempts with the wrong password reach the set times, the device is locked.
Locking Duration
The device releases the lock after the setting duration.

6
3 Temperature Measurement
When you enable this function, the device measures the actual temperature of the scene. It
alarms when temperature exceeds the temperature threshold value.
3.1 Notice
This part introduces the notices of configuring temperature measurement function.
●The target surface should be as vertical to the optical axis as possible. It is recommended that
the angle of oblique image plane should be less than 45°.
●The target image pixels should be more than 5 × 5.
●If multiple presets will be taken for temperature measurement, it is recommended to set the
patrol time above 20 s.
●Please select line thermography or area thermography for a certain area temperature
measurement. The point thermography is not recommended in case of deviation occurred
during device movement to affect the accuracy of temperature measurement.

7
3.2 Thermography Configuration Flow Chart
This part introduces the process of configuring temperature measurement.
Figure 3-1 Thermography Configuration Flow Chart

8
Note
Please refer to the Quick Start Guide for detailed information of Installation part in the flow chart.
3.3 Automatic Thermography
Configure the temperature measurement parameters and temperature measurement rules. The
device can measure the actual temperature and output alarms when temperature exceeds the
alarm threshold value.
3.3.1 Set Thermography Parameters
Configure the parameters of temperature measurement.
Steps
1. Go to Configuration → Local, enable Display Temperature Info. .
Display Temperature Info.
Select Yes to display temperature information on live view.
Enable Rules to display the rules information on live view.
2. Click Save.
3. Go to Configuration → Temperature Measurement → Basic Settings to configure parameters.
Enable Temperature Measurement
Check to enable temperature measurement function.
Enable Color-Temperature
Check to display Temperature-Color Ruler in live view.
Display Temperature Info. on Stream
Check to display temperature information on the stream.
Display Temperature in Optical Channel
Check to display thermal channel temperature information in the optical channel.
Display Max./Min./Average Temperature
Check to display maximum/minimum/average temperature information on live view when
the temperature measurement rule is line or area.
Position of Thermometry Info
Select the position of temperature information showed on the live view.
●Near Target: display the information beside the temperature measurement rule.
●Top Left: display the information on the top left of screen.
Add Original Data on Capture

9
Check to add data on alarm triggered capture of thermal channel.
Add Original Data on Stream
Check to add original data on thermal view.
Data Refresh Interval
It means the refresh interval of temperature information.
Unit
Display temperature with Degree Celsius (°C)/Degree Fahrenheit (°F)/Degree Kelvin (K).
Temperature Range
Select the temperature measurement range.
Version
View the version of current algorithm.
Calibration File Version
View the version of calibration file.
Alarm Interval
Set the alarm interval between two alarms.
Reflect Light Filter & Forklift Filter
Enable these functions if there is strong reflect light from sun or forklift in the scene. Or it
may cause false alarm.
Check Display Filtering Status, there will be an OSD when the filter is ON.
Click Restart to restart algorithm library.
Note
The settings vary according to different camera models.
4. Click Save.
3.3.2 Set Normal Mode
This function is used to measure the temperature of the whole scene and alarm.
Steps
1. Go to Configuration → Temperature Measurement → Basic Settings, and check Enable
Temperature Measurement.
2. Refer to Set Thermography Parameters to set the parameters.
3. Go to Configuration → Temperature Measurement → Advanced Settings, and select Normal.
4. Configure the parameters of normal mode.
Emissivity
Set the emissivity of your target. The emissivity of each object is different.

10
Distance
The distance between the target and the device.
Pre-Alarm Threshold
When the temperature of target exceeds the pre-alarm threshold, and this status keeps more
than Filtering Time, it triggers pre-alarm.
Alarm Threshold
When the temperature of target exceeds the alarm threshold, and this status keeps more
than Filtering Time, it triggers alarm.
Pre-Alarm Output and Alarm Output
Check Pre-Alarm Output and Alarm Output to link the pre-alarm or alarm with the connected
alarm device.
Temperature Sudden Change Alarm
When the temperature change exceeds the set sudden change alarm value within the set
cycle, the camera triggers an alarm.
Note
Temperature sudden change alarm is only supported by certain device models.
5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
6. Click Save.
The maximum and minimum temperature will be displayed on the live view.
Note
Go to Image → VCA Rules Display to adjust the fonts size and the temperature colour of
normal, alarm and pre-alarm.
3.3.3 Set Expert Mode
Select the temperature measurement rules from Point, Line, or Area and configure parameters,
the device alarms if the alarm rules are met.
Steps
1. Go to Configuration → Temperature Measurement → Basic Settings, check Enable
Temperature Measurement.
2. Refer to Set Thermography Parameters to set the parameters.
3. Go to Configuration → Temperature Measurement → Advanced Settings, select Expert.
4. Select and enable the temperature measurement rules. Please refer to Set Thermography Rule
for setting the rule.
5. Optional: Click Area's Temperature Comparison to set the alarm rules and the temperature.
6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.

11
7. Click Save.
The maximum temperature and thermography rules will be displayed on the live view.
Note
Go to Image → VCA Rules Display to adjust the fonts size and the temperature color of normal,
alarm and pre-alarm.
8. Optional: Call the preset and check if the rules are efficient.
9. Enable the scan function of device, such as linear scan to monitor the scene.
3.3.4 Set Thermography Rule
Steps
1. Customize the rule name.
2. Select the rule type to Point, Line, or Area. Then draw a point, line, or area on the interface
where the position to be measured.
Point
Please refer to Point Thermographyfor detailed configuration.
Line
Please refer to Line Thermographyfor detailed configuration.
Area
Please refer to Area Thermographyfor detailed configuration.
3. Configure the temperature measurement parameters.
Emissivity
Set the emissivity of the target. The emissivity of the surface of a material is its effectiveness
in emitting energy as thermal radiation. Different objects have different emissivity. Refer to
Common Material Emissivity Reference to search for the target emissivity.
Distance
The distance between the target and the device.
Reflective Temperature
If there is any object with high emissivity in the scene, check and set the reflective
temperature to correct the temperature. The reflective temperature should be set the same
as the temperature of the high emissivity object.
4. Click and set the Alarm Rule.
Alarm Temperature and Pre-Alarm Temperature
Set the alarm temperature and pre-alarm temperature. E.g., select Alarm Rule as Above
(Average Temperature), set the Pre-Alarm Temperature to 50 °C, and set the Alarm
Temperature to 55 °C. The device pre-alarms when its average temperature is higher than
50 °C and alarms when its average temperature is higher than 55 °C.
Filtering Time
It refers to the duration time after the target temperature reaches or exceeds the pre-alarm

12
temperature/alarm temperature.
Tolerance Temperature
Set the tolerance temperature to prevent the constant temperature change to affect the
alarm. E.g., set tolerance temperature as 3°C, set alarm temperature as 55°C, and set pre-
alarm temperature as 50°C. The device sends pre-alarm when its temperature reaches 50°C
and it alarms when its temperature reaches 55°C and only when the device temperature is
lower than 52°C will the alarm be cancelled.
Pre-Alarm Output and Alarm Output
When the temperature of target exceeds the pre-alarm or alarm threshold, it triggers the pre-
alarm or alarm output of the connected device.
Area's Temperature Comparison
Select two areas and set the comparison rule, and set the temperature difference threshold.
The device alarms when the temperature difference meets the setting value.
5. You can shield certain area from being detected. Refer to Set Shielded Region for detailed
settings.
6. Click Save.
Click Live View, and select thermal channel to view the temperature and rules information on
live view.
3.3.5 Point Thermography
Configure the temperature measurement rule and click any point in live view to monitor the
temperature.
Steps
1. Click in the live view and a cross cursor showed on the interface.
2. Drag the cross cursor to desired position.
Go to Live View interface to view the temperature and rule of the point in thermal channel.
3.3.6 Line Thermography
Configure the temperature measurement rule and monitor the maximum temperature of the line.
Steps
1. Click and drag the mouse to draw a line in the live view interface.
2. Click and move the line to adjust the position.
3. Click and drag the ends of the line to adjust the length.
Go to Live View interface to view the maximum temperature and rule of the line in thermal
channel.

13
3.3.7 Area Thermography
Configure the temperature measurement rule and monitor the maximum temperature of the
area.
Steps
1. Click and drag the mouse in the live view to draw the area and right click to finish drawing.
2. Click and move the area to adjust the position.
3. Drag the corners of the area to adjust the size and shape.
Go to Live View interface to view the maximum temperature and rule of the area in thermal
channel.
3.3.8 Set Shielded Region
You can configure areas from being detected.
Steps
1. Check Enable Shield Area.
2. Click .
3. Drag the mouse in the live view to draw the area. You can drag the corners of the red rectangle
area to change its shape and size.
4. Right click the mouse to stop drawing.
5. Optional: Select one area and click to delete it.
6. Click Save.
3.4 Manual Thermography
After enable the manual thermography function of the device, you can click any position on the
live view to show the real temperature.
Steps
1. Go to Configuration → Local and select Display Temperature Info. as Yes.
2. Go to Configuration → Temperature Measurement → Basic Settings.
3. Check Enable Temperature Measurement.
4. Click Save.
5. Go to live view interface and select thermal channel, click . Click any position on the
interface to show the real temperature.