Grundig 43 VCE 223 User manual

ENGLISH
2
EU directives
This product complies with the
following EU directives:
2014 / 53 / EU, 2009/125/
EC, 2017/1369/EU, 2011/65/EU.
To obtain a copy of declaration of
conformity (DoC):
Please visit http://www.grundig.com/
download/doc. You can access the
declaration of conformity by typing model
number of your television indicated on
the cover page of the instruction manual
into the field where it says "Enter model
number".
This appliance can be used observing the
legal regulations in the European countries
below.
AT, BE, BG, CH, CY, CZ, DE,
DK, EE, ES, FI, FR, GB, GR, HU,
IE, IS, IT, LI, LT, LU, LV, MT, NL,
NO, PL, PT, RO, SE, SI, SK, HR, TR.
The 5150-5350 MHz band is restricted
to indoor use only. (For Wi-Fi/Bluetooth
integrated model or Wi-Fi integrated
model).
This device can also be operated in the
countries outside Europe.
Table of Contents
2 EU directives
3 About your TV
3 Intended use
3 Safety
5 Environmental information
6 Packaging contents
7 Installation or hanging
8 Connections
9 Keypad
9 Inserting batteries into the remote
control
10 Remote control
11 Initial set-up and setting up the TV
15 Selecting the TV mode
15 Selecting a channel directly
15 Selecting a channel step-by-step
15 Selecting a channel from the channel
list
15 Selecting a signal source
15 Selecting the volume
16 Downloading applications
16 Recording from digital TV channels
18 Additional information
19 Licenses
19 Abbreviations
19 Cleaning the TV
Detailed instruction manual
For details on how to use
this appliance, please
scan the QR code using
your mobile device or visit
www.grundig.com.

3
ENGLISH
About your TV
7 Android TV allows you to access your
favourite TV shows, movies, subscription
services, songs, pictures and games.
7 You may use your TV to watch TV shows
on DVB-S, DVB-T and DVB-C.
7 Many features of the TV set require
an Internet connection. The TV set is
equipped with WLAN feature and a LAN
port.
Intended use
7 The TV set is designed for use in dry
rooms.
7 Use the TV with the supplied stand or a
suitable VESA bracket.
7 The TV is primarily intended for the
playback of TV programmes, streaming
content and audio/video material from
external devices. Any other use is strictly
prohibited.
It is not intended as an information
display or for predominant use as a
computer monitor. If a still image or a
non-full-format image is displayed for
an extended period, visible traces may
remain on the screen for some time.
This is not a defect that can be used as
the basis for a warranty claim.
Transporting the product
Unplug the product before transportation.
Disconnect antenna cable and other
external devices connected to the TV. If
the product's original packaging box isn't
available, wrap it in bubble wrap or thick
cardboard and make sure that it will not
get damaged during transportation.
Safety
WARNING
Risk of electrical accident
IMPORTANT SAFETY INSTRUCTIONS
- KEEP INSTRUCTIONS FOR FUTURE
REFERENCE
Immediately followed by: Read all safety
warnings, instructions, illustrations and
specifications provided with this appliance.
7 Standby LED turns off when the mains
plug is disconnected. If Standby LED
is lit then it means that your product is
connected to mains.
7 Do not dismantle the TV. Safety risks
may arise and also the guarantee of the
product can become void if the television
is dismantled.
7 The TV can only be operated with the
power cable or the AC/DC adapter
supplied with the product.
7 Do not operate the TV with a damaged
power cable or AC/DC adaptor (if
supplied).
7 If the plug on the TV has an earthing
contact, insert the plug only into a socket
with an earthing contact.
7 Plug your TV into the mains socket only
after you have connected the external
devices and the antenna.
7 Protect your TV set from moisture. Do not
place any vessels filled with water (such
as vases) on the TV.

ENGLISH
4
WARNING
Injuries caused by falling TV
Never place the TV on an unstable surface.
The TV may fall, causing serious injury,
possibly leading to death
in isolated cases. Observe the following
precautions:
7
Make sure that the stand or other furniture
you will place the TV on is robust enough
to carry the television.
7
Make sure that the TV does not protrude
beyond the dimensions of the furniture on
which it is resting.
7
Do not place the TV on tall furniture
that has the risk of tipping over such as
cabinets, sideboards or bookcases. If you
have no other choice, fix the furniture and
the TV to the wall to prevent them from
tipping over.
7
Do not place the TV on fabric or other
materials located between the TV and
furniture.
7
Instruct children that there is danger
associated with climbing on furniture
when the TV is to be reached.
7
Consider the above mentioned warnings
whenever you change the location of the
TV.
Fire hazard
7 To prevent the spread of
fire, keep candles or other
open flames away from this
product at all times.
7 Do not cover the ventilation slots on the
TV.
7 Always unplug the power plug and
antenna plug during a thunderstorm.
7 Keep candles or other open flames away
from the TV.
7 Do not expose the batteries to extreme
heat such as sunshine, fire or the like.
7 Only use batteries of the same type
(brand, size, properties). Do not use used
and new batteries together.
7 Apparatus connected to the protective
earthing of the building installation
through the mains connection or through
other apparatus with a connection to
protective earthing – and to a television
distribution system using coaxial cable,
may in some circumstances create a
fire hazard. Connection to a television
distribution system therefore has to be
provided through a device providing
electrical isolation below a certain
frequency range
Interface criteria
This product has been manufactured in
compatibility with Telecommunication
networks.

5
ENGLISH
Tips for power saving
7
Switch the TV to stand-by if you will not
use it for a while. In standby mode, the
TV uses very little energy (≤ 0.5 W).
If you do not use the TV for an extended
period, turn it off with the power switch
if any or unplug the power cord from the
socket. When you switch off or unplug
the TV, switch on timer and programmed
recordings will not function.
7 Select a location where no direct sunlight
falls on the screen. Thus, you can select
a lower backlight and provide power
saving.
7
Your device consumes less energy when
brightness is reduced.
Electromagnetic interference
7
Devices connected to he product (satellite
receiver, DVD player, and etc.) or signal
emitting devices (router and etc.) close to
the product may cause disturbance in the
image and noise in the sound.
7
Connection cables used on the product
must be shorter than 3 m.
7
If the product cannot perform its function
due to electrostatic discharge, the user
may need to switch off and then switch
on the product.
7
A shielded, HDMI-certified and ferrite
cable must be used with the product.
7
If the product cannot be recovered as a
result of an electrostatic discharge, user
intervention will be required.
Note on software update
Descriptions and images in the user manual
may change with the TV software update.
CAUTION
Shortened service life due to high
operating temperature
7 Do not place the TV next to heating units
or in direct sunlight.
7 To ensure adequate ventilation, maintain
clearance of at least 10 cm around the
TV.
Discolouration of furniture due to
rubber feet
7 Some furniture surfaces may discolor
when they come in contact with rubber.
To protect furniture, you can place a
sheet made of glass or plastic under the
stand. Do not use textile underlays or
mats such as doilies.
Environmental information
7 Do not dispose of batteries
in the household waste.
Used batteries must be
returned to retail stores or
public collection points. You help protect
the environment in this way.
7 Do not dispose of the
product along with normal
household waste at the end
of its service life. Take it to
a recycling centre for electrical and
electronic equipment.
7 Be sure to dispose of packaging
materials for your product separately
according to the guidelines of local
authorities so that they can be recycled in
an environmentally safe manner.

ENGLISH
6
Packaging contents
4
2
5
6
User
Manual
1
7
3
Standard accessories
1. TV
2. Stand
3. Remote control
4. Batteries for remote controls
5. Screws and installation instructions for stand
6. Quick Instruction Manual
7. Power cord
Optional Accessories
Cleaning cloth
Wall hanging screws

7
ENGLISH
Installation or hanging
7 Select a location so that no direct sunlight
falls on the screen.
Installation with stand
7 To mount the stand, refer to the
installation instructions included.
7 Place the TV on a hard, level surface.
Preparing for mounting on the
VESA bracket
Contact authorized dealer to purchase the
installation kit.
You will need:
7 A pair of scissors,
7 A cross-tip screwdriver.
Follow the installation instructions for the
VESA installation kit.
1. Place the TV in the film on a smooth
surface with the screen facing down.
2. Cut open the film on the back side
using the scissors.
3. Connect the required cables to
the connectors on the TV. See the
“Connections” section in this manual.
4. Tie the cables so they do not hang
down onto the floor.
5. Screw the VESA bracket onto the
television and mount it according to its
installation instructions. VESA

ENGLISH
8
7 USB 1: USB socket for external data
medium.
7 HDMI1: Input for digital audio and
image data.
7 CI: For CA modules for receiving
scramble channels.
ANT-INOptic Out SATELLITE
13/18V max.500mA
HDMI2HDMI3
(ARC)
USB2 (HDD)
SERVICE
5V/1A
USB1 HDMI1 COMMON INTERFACE
AC-IN
Connections
7 AC IN: Power cord input.
7 SERVICE: Service only.
7 LAN: Network connection.
7 Optic Out: optical audio output.
7 USB2 (HDD): USB socket for external
data medium.
7 HDMI3 (ARC): Input for digital audio
and image data.
7 HDMI2: Input for digital audio and
image data.
7 SATELLITE: Input for satellite antenna
signal. Suitable for single-cable SCR
system.
7 ANT IN: For antenna cable (terrestrial
antenna or cable connection).
7 U: External audio output or headphone
jack with adapter.

9
ENGLISH
Keypad
Switching the TV on from the
standby mode
1. Press 8 to turn on the TV from the
standby mode.
Switching the TV to sleep mode,
and turning it on from the sleep
mode
1. The TV shall switch to sleep mode when
8 is pressed shortly while the TV is on.
2. The TV shall switch on from the sleep
mode when 8 is pressed shortly while
the TV is on sleep mode.
Switching the TV to the standby
mode
1. Press 8 for 5 seconds to switch the TV
to the standby mode.
– Turn off menu shall be displayed.
2. Press 8 again to select OK.
3. The TV switches to the standby mode.
Inserting batteries into the
remote control
1. Open the battery compartment.
2. Insert batteries as marked on the
bottom of the battery compartment (2
× Alkaline/ LR03/AAA).
3. Close the battery compartment.

ENGLISH
10
Remote control
Cursor Control
Moves the cursor up and
down in the menus.
Moves the cursor left/right in
menus
Activates various functions.
Turns on/off the television
(stand-by) Selecting an input
Turns the sound on/off
(Mute)
Switches the menus back
one menu level
Opens menus of various
functions
Switches between teletext
and TV modes
Opens the Home menu
Selects the channels step
by step
Adjusts the volume
Displays information
Directly selects the
channels
Launches the App-2
Launches the App-1
Launches the App-4
Launches the App-3
Selects/activates various
functions in menus
Select subtitle
Play, Pause, Forward,
Reverse

11
ENGLISH
Quick Set-up
5. Select »Resume«.
6. Follow the instructions displayed on
your TV and on the screen of your TV.
– The »Services and Terms« menu
is displayed when the set-up is
completed.
7. Select »Accept«.
8. Select »Yes« to allow sharing of the
location information of the device
or
select »No« if you do not want to share
the location information.
9. Select »Yes« to contribute for the
development of Android;
or
select »No« if you do not want
contribute to the development.
10. Android set-up is complete. Press
>
to
view the features of your device.
Note:
7 Resume from article 25 if you have
performed a Quick set-up.
Manual set-up
11. Select »Skip«.
12. Select your wireless network with
V or
Λ or press .
13. Enter the wireless network password
with the screen keyboard, select
and press .
– »Connect to network.......« message
is displayed, and then »Successfully
Connected to Internet« message is
displayed.
14. Confirm »Log in« with
or
to continue without logging in, select
»Skip« and confirm with .
Initial set-up and setting up
the TV
1. Connect the antenna and external
device cables.
2. Insert the power plug into the socket.
3. Switch on the TV with on the remote
control.
– The welcome menu shall be displayed
on the screen after a while.
4. Select language.
Note:
7 You may set up your TV using 2
methods.
– »Quick Set-up« – If you have an
Android phone, you may transfer the
network settings and account settings
easily from your phone.
– »Manual Set-up« – If you do not own
an Android phone, you may enter all
settings manually.
– Resume from article 5 for quick set-up;
or
– Resume from article 11 for manual
set-up.

ENGLISH
12
22. Select the country.
23. Press to set a password.
24. Enter the password »1 2 3 4« using
»1...0« on the displayed password
screen and press .
25. Enter the password »1 2 3 4« again
using »1...0« on the displayed
confirmation screen.
– »Select TV mode« menu shall be
displayed.
26. Confirm »Home« with ;
or
Use
V or Λ to select »Store« and
confirm with .
– »Home« – mode is optimized to
provide energy efficiency when the
TV is used in a household.
– »Store« – mode is optimized to allow
demo display on a store with fixed
settings.
27. To turn on the integrated Chromecast
feature, select »On« and confirm with
;
or
Use
V or Λ to select »Off« and
confirm with .
Important:
7 To keep integrated Chromecast feature
continuously on increases the energy
consumption.
28. Select the antenna type.
29. The next procedure depends on the
selected antenna type. Follow the
instructions on the screen.
– For DVB-S (Satellite) reception, go to
article 30,
– For DVB-C (Cable) reception, go to
article 47
– For DVB-T (Terrestrial) reception, go
to article 54
15. Select and press to continue
after entering your e-mail address with
the screen keyboard.
16. Select and press to continue
after entering your account password
with the screen keyboard.
17. Follow the instructions displayed on
your TV and on the screen of your TV.
– The »Services and Terms« menu
is displayed when the set-up is
completed.
18. Select »Accept«.
19. Select »Yes« to allow sharing of the
location information of the device
or
select »No« if you do not want to share
the location information.
20. Select »Yes« to contribute for the
development of Android;
or
select »No« if you do not want
contribute to the development.
21. Android set-up is complete. Press
>
to
view the features of your device.

13
ENGLISH
Searching for satellite channels
30. Select » Satellite«.
– »Satellite antenna type« menu shall
be displayed.
Satellite Antenna Type Single
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
31. Confirm »Single« with ;
or
Depending on the satellite system you
use, select »DiSEqC 1.0«, »DiSEqC
1.1«, »DiSEqC 1.2«, »Single Cable I«,
»Single Cable II« or »Tone Burst« with
V or Λ and confirm with .
– »Select Operator« menu shall be
displayed.
Select Operator Standard
TKGS
32. Confirm »General« with ;
or
Select »TKGS« and press to confirm.
– »LNB List« menu shall be displayed.
LNB List Next
Turksat 42.0ºE On
33. Select the satellite displayed on the list
and confirm with .
– »LNB Settings« menu shall be
displayed.
LNB Settings Satellite Status
On
Satellite Selection
Turksat 42ºE
Scan Mode
Full
Scan Type
All
Store Type
34. Select »Satellite Status« as »On« with
.
35. Select »Satellite Satellite Selection«.
– »Satellite Selection« menu shall be
displayed.
Satellite Selection
Please configure the Satellite Selection
Use the 'OK’ key to select a value, and ‘back’ key to return back to the previous page.
Astra4A/SES5 5ºE
Eutelsat7A 7.0ºE
Eurobird 9.0ºE
Hotbird 13.0ºE
Astra1 19.2ºE
36. Select the satellite you want to perform
scan on with V or Λ and confirm with
.
37. Select »Scan Mode«.
– »Scan Mode« menu shall be
displayed.
Scan Mode
Please configure the Scan Mode.
Use the 'OK’ key to select a value, and ‘Back’ key to return back to the previous page.
Network
Full
38. Select »Network« or »Full« with V or
Λ and confirm with .
39. Select »Scan Type«.
– »Scan Type« menu shall be
displayed.

ENGLISH
14
Scan Type
Please configure the Scan Type.
Use the 'OK’ key to select a value, and ‘Back’ key to return back to the previous page.
All
Encrypted Channels Only
Free
40. To select whether you want to search
for free digital channels (free) only or
encrypted digital channels (Encrypted)
only or both (Free+encrypted), press
V or Λ to select »All«, »Encrypted
Channels Only« or »Free« and press
to confirm.
41. Select »Store Type«.
– » Store Type« menu shall be
displayed.
Store Type
Please configure Store Type.
Use the 'OK’ key to select a value, and ‘Back’ key to return back to the previous page.
All
Only Digital Channels
Only Radio Channels
42. To select whether you want to search
for digital channels (digital) only or
radio channels (Radio) only or both
(Digital+Radio), press V or Λ to
select »All«, »Only Digital Channels« or
»Only Radio Channels« and press
to confirm.
43. Press to return to the previous menu
after completing the settings.
44. Select »Next« with
V or Λ and confirm
with .
– »Channel Scan« menu shall be
displayed.
Channel Scan
First, please connect with the satellite.
Start the channel scan now?
You may scan for channels from the Menu if you skip this step.
Scan
Skip Scan
45. To start scanning for channels, select
»Scan« and press to confirm.
– The »Scanning« menu shall be
displayed and the scan for TV
stations shall be started.
– The scan is complete when the
»FINISH« message is displayed.
46. Press to complete the set-up and exit.
Searching for cable channels
47. Select »Cable«.
– »Select Operator« menu shall be
displayed.
Select Operator
You may select only one operator.
Others
48. Confirm the »Others« with ;
– »Channel Scan« menu shall be
displayed.
Channel Scan
First, please connect with the satellite.
Start the channel scan now?
You may scan for channels from the Menu if you skip this step.
Scan
Skip Scan
49. To start scanning for channels, select
»Scan« and press to confirm.
– »Cable Scan Configure« menu shall
be displayed.

15
ENGLISH
Cable Scan Configure
Please configure the cable information.
Use the 'OK’ key to specify a value, and ‘RIGHT’ key to go to the next page.
Scan Mode
Full
50. To select »Scan Mode«, press .
51. Press
V or Λ to select »Full«,
»Advance« or »Fast« and press .
52. To start the channel scan, press
>
.
– The »Scanning« menu shall be
displayed and the scan for TV
stations shall be started.
– The scan is complete when the
»FINISH« message is displayed.
53. Press to complete the set-up and exit.
Searching for terrestrial
channels
54. Select » Antenna«.
– »Channel Scan« menu shall be
displayed.
Channel Scan
First, please connect with the satellite.
Start the channel scan now?
You may scan for channels from the Menu if you skip this step.
Scan
Skip Scan
55. To start scanning for channels, select
»Scan« and press to confirm.
– The »Scanning« menu shall be
displayed and the scan for TV
stations shall be started.
– The scan is complete when the
»FINISH« message is displayed.
56. Press to complete the set-up and exit.
Selecting the TV mode
1. Select »TV« application from the
»Applications« item on the Home menu
and confirm with .
Selecting a channel directly
1. Use the number buttons to select the
channels directly in the TV mode.
Selecting a channel step-by-
step
1. Use or to select television
channels step by step in the TV mode.
Selecting a channel from
the channel list
1. Press in the TV mode.
– »Channel List« Broadcast menu shall
be displayed.
2. Select the channel with
V or Λ and
confirm with .
Selecting a signal source
1. Press .
– »Inputs« menu shall be displayed.
2. Select signal source.
3. Press .
Selecting the volume
1. Adjust the volume using and .

ENGLISH
16
Downloading applications
1. Select »Applications« from the »Home«
menu.
2. Use
<
or
>
to select »Play Store«
application and confirm with .
– »Google Play Store« shall be
displayed.
3. Use
<
or
>
to select an application
from the »Applications«, »Games«
category or search for the desired
application from the » « item.
4. Select the application you want to
install and confirm with .
– App information shall be displayed.
5. To install the application, select »Install«
and confirm with .
– After a short while, download of the
application shall be complete.
6. To launch the app, select »Open« and
confirm with .
– Main screen of the application shall
be displayed.
Starting an installed application
1. Select »Applications« from the »Home«
menu.
2. Use
<
or
>
to select the application you
want to launch and confirm with .
– Main screen of the application shall
be displayed.
3. Press or to exit the application.
Adding applications to the
favourites list
1. Select »Applications« from the »Home«
menu.
2. Use
>
to select »+« and confirm with
. »Select application« menu shall be
displayed.
3. Select the application you want to add
to the home menu and confirm with .
Recording from digital TV
channels
TV programs can be recorded and played
only through an external data medium (a
hard disk or a USB memory).
Notes
7 Recording can only be done on USB
memory sticks and hard disks with FAT
and FAT32 format.
7 If the product cannot be recovered in the
data playing/sharing/recording mode
as a result of an electrostatic discharge,
user intervention shall be required.
Direct recording
1. Press to save the program being
played.
2. Use
V to select »Start Record« and
confirm with .
– Recording starts and the recording
period is displayed on the lower left
corner of the screen.
Note
7 You may exit TV mode and use another
application during recording; the
recording operation is resumed at this time.
3. Press for 5 seconds to stop
recording.
Scheduling a record
1. Press .
2. Use
V ,
<
or
>
to select »Program List«
and confirm with .
– The Program List menu shall be
displayed.
3. To schedule the recording of the
broadcast, confirm »PVR« with .
4. Enter the information required for
recording and confirm »Add« with .
– The Program List menu shall display
the recording you have scheduled.

17
ENGLISH
Using Chrome Cast (Google
Cast) on an Android or an iOS
mobile device
You may cast photos, videos or games
using an application with Chrome Cast
feature or from an iOS mobile device to
your TV.
Notes
7 The Android TV and your mobile
device shall have the latest version of
Chrome Cast application installed.
7 Chrome Cast function works on
Android 2.3 and above for Android
devices and on iOS versions 7.0 and
above for Apple iOS devices.
7 Broadcasting from Google Chrome
browser is not supported on mobile
devices.
7 To get detailed information on the
integrated Chrome Cast feature, refer
to the relevant section of the detailed
user manual of the TV.
1. The TV and the mobile device shall be
connected to the same network.
2. Start the application with Chromecast
feature from the mobile device.
3. Press the symbol from the
application screen.
4. Select TV from the list to start playback.
– The content starts to be played on the
TV screen.
Launching the application App-1
1. Press on the remote control;
or
Select »App-1« application from the
Home menu and press .
2. Press or to exit the application.
Launching the application App-2
1. Press on the remote control;
or
Select the »App-2« application from the
Home menu and press .
2. Press or to exit the application.
Launching the application App-3
1. Press on the remote control;
or
Select »App-3« application from the
Home menu and press .
2. Press or to exit the application.
Launching the application App-4
1. Press on the remote control;
or
Select the »App-4« application from the
Home menu and press .
2. Press or to exit the application.

ENGLISH
18
Additional information
Default satellites
14
LNB power supply
13/18 V, 14/19 V optional, 500 mA
maximum
LNB switching signal
0/22 kHz 650 mV +/- 250 mVpp
DiSEqC
1.0-operation
Digital reception ranges
Satellite
Ku band: 10.700 MHz … 12.750 MHz
Modulation: DVBS QPSK, DVBS2 QPSK,
8 PSK
IF band: 950 MHz … 2150 MHz
Signal strength: –25 dBm … –65 dBm
Cable (DVB-C)
General band: 110 MHz … 862 MHz
Modulation: 16 QAM, 32 QAM,64 QAM,
128 QAM and 256 QAM
Symbol rate: 4.0 Msym/s … 7.2 Msym/s
Terrestrial (DVB-T)
VHF/UHF-Band, bandwidth 7 MHz and 8
MHz
FFT size: 2 k, 8 k
Modulation: 16 QAM, 64 QAM, QPSK
Guard interval: 1/4, 1/8, 1/16, 1/32
Terrestrial (DVB-T2)*
VHF/UHF-Band, bandwidth 7 MHz and 8
MHz
FFT size: 1 k, 2 k, 4 k, 8 k, 16 k, 32 k
Modulation: 16 QAM, 64 QAM,
256 QAM, QPSK
Guard interval: 1/4, 19/256, 1/8, 19/128,
1/16, 1/32, 1/128
* DVB-T2 is optional and therefore not
available on all products.
Preset channels
TV/Radio 6000 (satellite – DVB-S),
1000 (cable – DVB-C)
99 (analogue)
1000 (terrestrial – DVB-T)
99 (analogue)
Supported media files
Picture files: jpg/jpe, bmp, png, gif, heif,
heic
Music files: mp3, wma, m3u, m3u8, wav,
aif, m4a, aac, ac3, ec3, pls,
wpl, ogg, mp2, ra, flac, ape,
amr, ac4, awb, rm
Video files: rmvb, avi, mkv, mp4, 3pg, flv,
mpg, ts, wmv, vob, rm, mov,
avs, asf, mpe, mpeg, dat, asx,
m4v, tp, trp, tts, m2ts, mts, mlv,
m2v, m4v, vcl, flv, hlv, pvr,
ogm, webm, ram, iso, ssif,
264, 265, avs2, heic, ivf, m2t.
Technical changes and errors reserved.

19
ENGLISH
Abbreviations
7 ARC: Audio return channel, transmits
sound from the TV via an HDMI
connection.
7 AV: Audio/video.
7 CAM: Module for receiving scrambled
TV channels.
7 CI: Slot for modules for receiving
scrambled TV channels.
7 HbbTV: It is standard for information and
services provided through TV signals and
over the Internet, and it is an additional
service provided by some broadcast
stations.
7 HD: Collective term for high-resolution
audio/video data, usually 720, 1080 or
2160 lines.
7 HDMI: Connection for high-resolution
digital audio/video data.
7 LAN: local area network.
7 VESA: Organization that has developed
a standard for mounting the screens.
7 WLAN: wireless local area network.
Cleaning the TV
Pull the power cord out of the mains
socket. Clean the appliance with a damp
cloth and a mild detergent. Do not use
any detergents containing alcohol, spirit,
ammonia or scouring agent.
Use a damp, soft cloth to clean the screen.
Do not use water with soap or detergent.
Licenses
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
See http://patents.dts.com for DTS patents.
Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, DTS
and the Symbol together, DTS-HD, and the
DTS-HD logo are registered trademarks or
trademarks of DTS, Inc. in the United States
and/or other countries. © DTS, Inc. All
rights reserved.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
Explanation of the symbols
which may be present on back
side of the television
Double insulation. This
product doesn’t require
connection to electrical
earth (ground).
Alternating current. This
product works only with AC
line voltage in your
household electricity.
Direct current. This product
works only with AC/DC
adapter.

Beko Grundig Deutschland GmbH Rahmannstraße 3 65760 Eschborn