Grundig GLCD4000HD, GLCD4600HD User manual

COLOUR TV
Cinemo GLCD4000HD
Cinemo GLCD4600HD
ENGLISH
Grundig Helpline: 1800 509 394 Australia
Grundig Helpline: 0800 450 259 New Zealand

Installation 3
Remote control handset 4-5
Controls 4
Battery installation 5
Controls of
Front panel 6
Connections of
Back panel 7
Connection to
External equipment 8-12
Basic operation
On and Off 13
Programme selection 13
Volume adjustment 13
On screen language selection 13
On screen menus
Menu selection 14
Setting up TV stations 15-26
Sound adjustment 15-19
Picture adjustment 20-22
Child lock 23
Timer 24-26
DTV option Menu (in digital mode only) 27-30
Preset list Menu 31-33
Installation Menu 34-35
Station search 34
Front Light 35
Other Menu 36
Connection of PC 37
PIP (Picture-In-Picture) Feature 38-39
Watching PIP 38
PIP Audio input 38
Moving the PIP 39
Sub picture size 39
Programme scan 39
Information Menu (In Digital mode only) 40
Teletext 41-42
Displayable Monitor Specification 43
Guarantee 44
Troubleshooting
Check list 47
Contents
2

Power
This set operates on an AC mains supply, the voltage is as
indicated on the label on the back cover. Never apply DC
power to the set. In the event of thunderstorms or power-
cuts, please pull out the aerial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose the set to
rain or moisture. Do not rub or strike the Active Matrix LCD
with anything hard as this may scratch, mar, or damage the
Active Matrix LCD permanently.
Service
Never remove the back cover of the set as this can expose
you to very high voltage and other hazards. If the set does
not operate properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ωon
the back cover. For the best reception an outdoor aerial
should be used.
Location
Position your set so that no bright light or sunlight falls
directly onto the screen. Care should be taken not to
expose the set to any unnecessary vibration, moisture,
dust or heat. Also ensure that the set is placed in a posi-
tion to allow a free flow of air. Do not cover the ventilation
openings on the back cover.
Cleaning
Unplug the set before cleaning the face of the LCD Screen.
Dust the set by wiping the screen and the cabinet with a
soft, clean cloth. If the screen requires additional cleaning,
use a clean, damp cloth. Do not use liquid cleaners or
aerosol cleaners.
Installation
3
EN
To preserve the Environment,
do not rubbish.

-All the functions can be controlled with the remote control handset.
-Some functions can also be adjusted with the buttons on the front panel of the set.
Remote control handset
Controls
Before you use the remote
control handset, please
install the batteries.
4
NUMBER BUTTONS
i BUTTON
selects a menu.
D/ E(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F/ G(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection or displays the
current mode.
TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
SCAN
switches on the programme scan mode
through 4/16 sub pictures.
Display the TV Guide in digital mode.
PAP (Picture And Picture)
selects the double window function.
PSM (Picture Status Memory)
recalls your preferred picture setting.
SIZE
adjusts the sub picture size.
VCR, SAT, DVD
Switches to operating a GRUNDIG video
recorder, a GRUNDIG satellite receiver
or a GRUNDIG DVD player.
Keep the appropriate button VCR, SAT,DVD
pressed down. Then press the appropri-
ate button
Note : The functions available depend on the
model of the device you are using.
Just try it out.
POWER
switches the set On from standby or Off to
standby.
PIP
Switches the sub picture On or Off.
ARC
select your desired picture format.
page stop in teletext mode.
SLEEP
sets the sleep timer.
select a sub page number in teletext mode.
MUTE
switches the sound On or Off.
Zap function
returns to the previously viewed programme.
AV INPUT
Select DTV, TV, AV1, AV2, AV3, AV4, S-VIDEO,
COMPONENT, PC-RGB, HDMI1, HDMI2 mode.
switches the set on from standby.
PIP POSITION
relocates the sub picture in clockwise direction.
SSM (Sound Status Memory)
recalls your preferred sound setting.
STILL
freezes motion of the sub picture.
TIME
Display the time at the screen.
Selects a favourite programme add and delete
in digital mode.
- COLOURED BUTTONS
These buttons are used for teletext (only
TELETEXT models) or programme edit.

EN
Remote control handset Battery installation
5
-Your remote control handset is powered by two AA type batteries.
- To insert batteries, turn the remote control handset over and
remove the battery cover.
- Put the two batteries into the compartment observing battery
polarity.
- Replace the cover.
To avoid damage from possible battery leakage, remove the bat-
teries if you do not plan to use the remote control handset for an
extended period time. Do not use batteries of differing age or type.
Always discard of batteries safely.

Controls of
Front panel
6
1. MAIN POWER
switches the set On or Off.
2. D/ E(Programme Up/Down)
selects a programme or a menu item.
switches the set On from standby.
3. F/ G(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
4. MENU
selects a menu.
5. INPUT SELECT
selects DTV,TV,AV 1 ,AV 2 ,AV 3 ,AV 4 ,S-VIDEO,
COMPONENT,PC-RGB,HDMI1,HDMI2 mode.
6. POWER (rr)
switches the set On from standby or On to standby.
7. POWER/STANDBY INDICATOR (rr)
illuminates red in standby mode.
illuminates green when the set is switched On.
8. REMOTE CONTROL SENSOR
9. Front Light LED
-Shown is a simplified representation of the set.
-Here shown may be somewhat different from your set.
-This manual explains the features available on the Cinemo GLCD4000HD series.
1
7
98
6
5
4
3
2

Connections of Back panel
7
EN
1. HDMI1 INPUT / HDMI2 INPUT / AUDIO INPUT / RGB
INPUT SOCKETS
Connect the set output socket of the PERSONAL
COMPUTER to this socket.
2. AUDIO INPUT / COMPONENT INPUT (480i / 480p /
576i / 576p / 720p / 1080i / 1080p) SOCKETS
3. AERIAL SOCKET
4. AUDIO / VIDEO SOCKET
Connect the audio/video out sockets of the VCR to AV
sockets of the set.
5. Digital Audio (OPTICAL)
Connect digital audio from various types of equipment.
Note : In standby mode, these ports will not work.
6. POWER CORD SOCKET
This set operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to
operate the set on DC power.
7. AUDIO / VIDEO INPUT (AV4, S-VIDEO)
Connect video out from an S-VIDEO VCR to the S-
VIDEO input.
Connect the audio/video out sockets of the VCR to AV
sockets of the set.
8. AUDIO / VIDEO OUTPUT SOCKET
9. SERVICE ONLY SOCKET
1
7
8
9
2345 6

Connection to
External equipment
8
-You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your
manufacturers instruction books for specific information. Make sure all connections are made with both your set and
additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat dif-
ferent from your set.
Connect the RF out socket of the VCR to the aerial
socket on the back of the set.
Connect the aerial cable to the RF aerial in socket
of the VCR.
Store the VCR channel on a desired programme
number using the ‘Manual programme tuning’ sec-
tion.
Select the programme number where the VCR
channel is stored.
Press the PLAY button on the VCR.
Connect to Aerial socket
-If you connect an S-VIDEO VCR to the S-VIDEO input, the pic-
ture quality is improved; compared to connecting a regular VCR
to the Video input.
-To avoid picture noise (interference), leave an adequate dis-
tance between the VCR and set.
Use the INPUT SELECT button on the remote control to select
AV 1 ,AV 2 ,AV 3 , AV 4 or S-VIDEO.
(If connected to S-Video, select the S-VIDEO external input
source.)
Insert a video tape into the VCR and press the PLAY button on the
VCR. (See VCR owner’s manual)
Watching VCR
1
12 2
< Side panel of the set >
< Back panel of the set >
< Back panel of VCR >

Connection to External equipment
9
EN
-After subscribing for a local cable TV station and installing a con-
verter you can watch cable TV.
-For further information of cable TV, contact the local cable TV
station.
In using connection 1
Select programme number in programme switch of cable box.
Match the set programme with selected programme of cable box.
Select your desired programme with the remote control for cable
box.
In using connection 2
Use the INPUT SELECT button on the remote control and select
AV 1 ,AV 2 ,AV 3 , AV4 or S-VIDEO.
Tune to cable service provided channels using the cable box.
Watching Cable TV
3
3
When connecting the set to an external source,
match the colours of AUDIO/VIDEO input jacks on
the set with the output jacks on the audio/video
equipment: Video = yellow, Audio (Left) = white,
Audio (Right) = red.
Use the INPUT SELECT button on the remote con-
trol to select AV 1 ,AV 2 ,AV 3 ,AV4 or S-VIDEO.
Operate the corresponding external equipment.
See external equipment operating guide.
Watching external AV source
4
4
For cable TV
< Cable Box >
< Back panel of the set >
< Back panel of the set >
Camcorder
Video game set
< Back panel of the external
equipment >
2
1

Connection to
External equipment
10
•Component Input ports
You can get better picture quality if you connect DVD player with
component input ports as below.
How to connect
Connect DVD video inputs to Y, PB, PRof COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AUDIO
INPUT.
How to use
Turn on the DVD player, and insert a DVD.
Use INPUT SELECT button on the remote control to select COMPONENT. Refer to the DVD player's manual for oper-
ating instructions.
Watching DVD
5
5
< Side panel of the set >
< Back panel of a DVD player >
or
Component ports of the
set Y PBPR
Video output ports
of DVD player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR