10-20-009-01 Mounting instr BL 1-2-3-4 EU
1: Shade
2: Gasket
3: Internal ring
4: Light bulb
The shade tilts (all models except pendant )
The arm bends and swivels
( The BL 1, BL 3, BL 5 and BL 6 -
the BL 2 table model just bends )
The arm slides on the pole
(The BL 1, BL 3 and BL 5)
The BL 1, BL 2, BL3, BL 4, BL 5, BL 6, and BL 10
A practical tool that enables you to fasten
the lamp arm – simply use like a screwdriver
in the slot in the BestLite nut.
Light source: E14, 1x40W incandescent or 1x30W halogen bulb.
Turn power off when changing light bulb.
The lamp is not approved for outdoor use or use in damp/wet rooms.
Some advice on cleaning your BestLite:
Powder coated parts – base/bracket and shade:
Wipe the parts with a damp cloth soaked in warm water and a bit of mild detergent.
Chrome plated parts:
Wipe the lamp with a damp cloth and wipe dry to bring up lustre.
If the surface is sticky use a metal polish made especially for chromium or other soft
metals.
Use only soft cloth for wiping and polishing, never sponges or steel wool.
Do not use abrasive household cleaners.
Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.
