GUBI Gräshoppa User manual

Gräshoppa Task Lamp
005-053xx
Klubiensvej 7-9 / Pakhus 53
2150 Nordhavn, Copenhagen
Denmark
GUBI A/S
T: [phone]
CVR: 17940384
WWW.GUBI.DK
BULB REPLACEMENT
• Disconnect the power before replacing bulb.
TROUBLESHOOTING
• If lamp does not light, turn off the power. Check the bulb for a broken la-
ment. Replace bulb if necessary, then turn it on.
• If the lamp still does not light, please contact customer service at the local
dealer.
• If the external exible cable or cord of this lamp is damaged, it must be
replaced by a qualied electrician in order to avoid a hazard.
MAINTENANCE
• (Unplug power cord prior maintenance)
• To clean, use a soft cloth only.
• Do not use any chemical or abrasive cleaners.

SAFETY INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY
WARNING: Lighted bulb gets HOT! Do not touch while on.
CAUTION: Keep lamp away from curtains, bedding linens, and any other ammable materials.
Do not look directly at lighted bulb.
Turn off / unplug and allow lamp to cool before replacing bulb, cleaning or other maintenance.
Do not use in the bathroom or damp places.
CAUTION: TO REDUCE THE RISK OF FIRE, USE MAX. 40 WATT INCANDESCENT, E12, type b bulb,120V 60Hz AC ONLY.
Do not exceed recommended wattage.
CAUTION! IMPORTANT: LAMP MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN!
PREPARATION: Shut the power off.
Step 1
Step 2
53-20-003-01 Mounting instr Grashoppa Table Lamp US
3
4
1 Unpack lamp.
2 Place on stable ground.
3 Plug lamp to mains voltage.
4 Push switch to turn lamp on and off.