GVA GVA15GLED User manual

INSTRUCTION MANUAL
GVA15GLED
15.6” (39.6cm) HD LED
LCD TV

2
CONTENTS
Preface 4
Safety Precautions 4
Important Safety Instructions 7
In the Carton 10
Attaching Stand & Wall Mounting Instructions 11
Connections and Functions 12
Basic Installation 13
Remote Control 17
Remote Control Setup 20
Basic Operation 21
Input Source
Picture Menu
22
Sound Menu 25
Channel Menu 28
Lock Menu 33
Hotel Mode 35
Setup Menu 36
PVR and Time Shift Operation 39
PVR Setting 39
First Time Setup 39
Reset 39
USB Device Setup 40
Timeshift 41
Instant Recording 42
Time Recorder 42
Playlist 43
EPG (Electronic Program Guide) 44
ATV / HDMI / AV / YPbPr / PC 45
Multi Media Menu Operation 46
Photo 46
Music 47
Movie 48
22

3
CONTENTS
49
Care and Maintenance 50
FAQs 51
Text 48

4
PREFACE
Thank you for building this TV! Please read this manual thoroughly before operating the
TV.Make sure the TV was not damaged in transit. Should the TV is damaged, do not install
it and contact your dealer. Check that you have all the accessories according to the model.
SAFETY PRECAUTIONS
Put the TV on a stable surface.
Do not place any material on the TV.
Do not use the TV with xtures other than those
provided or suggested by the manufacturer.
Do not block or cover the ventilation openings on the
TV. If you have a wall mount, check that it is steady

5
Power cord and cables must be properly routed and
protected to prevent people from stepping on them and
causing the TV to fall.
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the TV before cleaning it. Do not use solvent or
liquid to clean the TV. Once Clean the TV with soft and dry
cloth.
SAFETY PRECAUTIONS (CONT.)
1. PREFACE
Thank you for buying this TV !Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit.Should the TV is damaged,do not install
your dealer.Check that you have all the accessories according to the model.
it and contact
2. SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount,check that it is steady.
Do not use the with fixtures other than those provided or
suggested by the manufacturer.
TV
3
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the before cleaning it.Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting,do not use spare parts other than those
suggested by the manufacturer.Using inadequate spare parts can
shocks,short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
4

6
In cause of troubleshooting, do not use spare parts
other than those suggested by the manufacturer. Using
inadequate spare parts can lead to electric shocks, short-
circuits re or other incidents.
Unplug the TV during lightening storms or when unused for
long periods of time.
SAFETY PRECAUTIONS (CONT.)
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the before cleaning it.Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting,do not use spare parts other than those
suggested by the manufacturer.Using inadequate spare parts can
shocks,short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
4

7
IMPORTANT SAFETY INSTRUCTIONS
Read this manual thoroughly before rst use and keep it in a safe place for future reference,
along with the warranty card, purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of re, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of equipment. Before operating this equipment,
please read this manual completely, and keep it nearby for future reference.
• Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
TV’s (including ampliers) that produce heat.
• Do not alter the grounding type plug provided with the TV. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. When the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the TV.
• Only use the attachments/accessories specied by the manufacturer.
• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or
sold with the TV.
• Unplug this TV during lightning storms or when unused for long periods of time.
• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• Refer all servicing to qualied service personnel. Servicing is required when the TV has
been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilt or objects have fallen into the TV, the TV has been exposed to rain or moisture,
does not operate normally, or has been dropped.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid a hazard.
NOTE: The TV must not be exposed to dripping or splashing and no objects lled with
liquids, such as vases, should be placed on the TV.

8
IMPORTANT SAFETY INSTRUCTIONS
Position
• If a television is not positioned in a sufciently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
• Securely attaching the TV to the wall mount fastened on the wall.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the TV controls.
• Not standing the TV on cloth or other materials placed between the television and
supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated.
• Away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a conned space such as a bookcase or similar unit.
• Do not put any objects lled with liquids, such as vases, on top of the TV set.
• Do not place any naked ame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
Electrical safety, power cord and plug
• Before installing this TV set, make sure your outlet voltage corresponds to the voltage
stated on the appliance rating label.
• To reduce the risk of re or electric shock, do not expose this appliance to rain or
moisture.
• Do not overload the power cord or power outlet.
• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
• Do not allow anything to rest on or roll over the power cord and signal cable.
• Protect the power cord and signal cable from being trampled.
• Do not expose the power cord and signal cable to moisture.

9
IMPORTANT SAFETY INSTRUCTIONS
• Do not apply excessive force to the screen when cleaning.
• Do not clean the screen with water or chemical cleaners as this may damage the LED
screen surface.
• Do not dismantle this product by yourself, as this may cause damage. There are no user-
serviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for advice or take
it to a local service centre for inspection or repair. No liability can be accepted for any
damage caused by non-compliance with these instructions or any other improper use or
mishandling of appliance.
TV with Class 1 construction shall be connected to a main socket outlet with a protective
earthing connection.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: • These servicing instructions are for use by qualied service personnel only.
To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualied to
do so.
•Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the documentation accompanying
this unit.
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

10
IN THE CARTON
GVA15GLED
TV Set
Base
Screwdriver and Screws
Power Adaptor
Remote Control
Two AAA Bateries Instruction Manual &
Quick - Start Guide

11
ATTACHING STAND & WALL MOUNTING
Attaching the base
Place the screen face down on a protective surface.Place the stand on the neck of the TV
and insert metal disc and tighten the screws (found in the accessories box) in the circled area
with the screw drive provided.
Remove theStand
To remove the stand,remove the sc come off rews in the circled area and the neck will .
49
Attaching the base
Place the advice face down on a protective surface. Place the stand on the neck of the TV and
insert and tighten the screws (found in the accessories box) in the circled area with the screw
drive provided.
Remove the Stand
Wall-mounting the Device
bracket support and wall support.
should not exceed 6mm.
Wall Mounting Instructions
Wall-mounting the
If you are mounting the device, pleaseconsult
75mm
75mm
for fu
a qualied installer rther instru ctions on
bracket support and wall support.
Mou t Specica ntion: 75 mm x 75 mm using
screw size M4 (not supplied).Length of screw
should not exceed 6 mm.
Please note:The 6 mm length of screw refers to
how deep the screw can go inside the mounting
holes.
When you are buying screws,you should add the original 6 mmto the thickness of your
mounting plate in order to get the total screw length.
49
Attaching the base
Place the advice face down on a protective surface. Place the stand on the neck of the TV and
insert and tighten the screws (found in the accessories box) in the circled area with the screw
drive provided.
Remove the Stand
Wall-mounting the Device
bracket support and wall support.
should not exceed 6mm.
Please note: The 6mm length of screw refers to how deep the screw can go inside the
Wall Mounting Instructions
Attaching the base
Place the advice face down on a protective surface. Place the stand on the neck of th
insert and tighten the screws (found in the accessories box) in the circled a
drive provided.
Remove the Stand
Wall-mounting the Device
TV

12
CONNECTIONS & FUNCTIONS
1. DC IN:Main power input.
2. Headphone: Connect earphones.
3. VGA:Connect to a PC’s PC-RGB output socket.
4. PC Audio: Connect to a PC’s Audio output socke t.
5. RF:Connection for the antenna plug.
6. HDMI:Connect to the HDMI output socket of a
DVD player.
7. USB:Connect to a portable USB storage device.
8. YPbPr:connect to the (component) output
sockets of a DVD player.
9. Coax:Connect to anexternal digital audio device.
10. Video: Connect to a DVD player’s VIDEO output
socket.
11. R/L:Connect to the R/LAUDIO output socket of a
DVD player.
Front and Back Connection of LED LCD TV
VOL +
VOL -
CH +
SOURCE
Remote Sensor
Power Indicator
STANDBY
CH -
MENU
Back View and Control Connections
HDMI
(ARC)
1. Press “STANDBY” button to turn
standby mode on or off.
2. Press “SOURCE” to select the
input source.
3. Press “MENU” to bring up the
setup menu on the screen.
4. Press “CH+” or “CH-” to scan
through channels.
5. Press “VOL+” or “VOL-” to
increase or decrease the volume.
6. REMOTE SENSOR: Infrared
sensor for the remote control.
7. POWER INDICATOR: Show red
in standby mode, show green
when your TV is switched on.
16
7
2
3
4
5
IN
DC

13
BASIC INSTALLATION
12
Basic Installation
Power Cord Connection
- Connect the power cord and power adaptor correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green or blue.
Antennas Connection
To ensure good picture and sound, a TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment shops, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.
Power Cord Connection
- Connect the power cord correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green.
Antennas Connection
To ensure good picture and sound, TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment shops, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.

14
BASIC INSTALLATION (CONT.)
13
YPbPr Conneczon
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input sockets on the set using the RCA cable
(3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb is blue, Pr is red. Audio
left is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input sockets on the set using the RCA cable
(3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb is blue, Pr is red. Audio
left is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
HDMI
(ARC)
AV Connection
Connect the VIDEO and AUDIO output socket of the DVD or VCR to the AV IN socket on the
set using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture
quality is improved compared to connecting a regular VCR to the video input. Connect the
Audio output of the DVD or VCR to the Audio input socket on the set using the RCA cable.
Match the sockets’ colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio
right in red. Select YPbPr input source using the SOURCE button on the remote control.
YPbPr Connection
IN
DC

15
BASIC INSTALLATION (CONT.)
14
Basic Installation (Cont.)
VGA (PC) Connection
Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output
of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE
button on the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control signals through
one cable only. These signals are transferred in digital.
14
Basic Installation (Cont.)
VGA (PC) Connection
Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output
of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE
button on the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control signals through
one cable only. These signals are transferred in digital.
HDMI
(ARC)
HDMI
(ARC)
HDMI Connection
HDMI connection allows the user to transfer both audio and video signals through one
cable only. These signals are transferred in digital. Select your HDMI source on TV source
menu accordingly.
VGA (PC) Connection
Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output
of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE
button the remote control.
IN
DC
IN
DC

16
BASIC INSTALLATION (CONT.)
15
Basic Installation (Cont.)
Coax Connection
Connect the Coaxial output of the TV to the C r. Your
ave the corresponding decoding functions to decode the signal coming
from the TV.
USB Connection
A portable USB device can be connected to the USB socket.
15
Basic Installation (Cont.)
Coax Connection
Connect the Coaxial output of the TV to the C r. Your
ave the corresponding decoding functions to decode the signal coming
from the TV.
USB Connection
A portable USB device can be connected to the USB socket.
HDMI
(ARC)
Coax Connection
r. Your
the TV.
USB Connection
A portable USB device can be connected to the USB socket.
IN
DC

17
REMOTE CONTROL
NUMBER BUTTONS: Press 0-9to select a channel.
MENU: Brings up the main menu to the screen.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK:Allows you to move, select and setup
the OSD options.
CH+/-: Channel up/down.
COLOUR BUTTONS: Used in afew sub menus.
SUBTITLE: Displays subtitle s.
SIZE: Change the picture format.
FAV: Press to inter your favourite program in DTV mode.
MEDIA: Press to select MEDIA mode.
TV/RADIO: Select TV orRADIO modes.
: PLAY/PAUSE inTIMESHIFT and MEDIA mode.
:Jump to previous and next track in
MEDIA mode.
: Fast reverse andforward key in MEDIA mode.
:Stop in MEDIA mode orexit the REC orTIMESHIFT
mode.
DTV MODE
VOL+/-: Press to increase/decrease the sound level.
EPG: Launches the EPG (Electronic Program Guide) in DTV mode.
GVA15GLED

18
REMOTE CONTROL (CONT.)
STANDBY:
SOURCE: Press
Press to turn the TV set on or off.
to cycle through the input source.
MUTE: Press to mute the sound.Press again or press V+to
un-mu te the TV.
PMODE: Select pictu re mode.
SMODE: Select sound mode.
SLEEP: Sets the TV sleep time.
0-9:TV channel number select.
: Multiple number p rogram channels.
:Retu rn to the previous channel viewed.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
MENU: B
AUDIO:
rings up the main menu to the screen.
EXIT: Press to close the on-screen display.
VOL+/-:Volume up/down.
CH+/-: Channel up/d
Select different audio modes.
own.
AT V MODE
GVA15GLED

19
REMOTE CONTROL (CONT.)
NUMBER BUTTONS: Press 0-9to select a teletext page.
TEXT:
:
Press to switch between TV andTeletext mode.
COLOUR BUTTONS: Select 4 preferred teletext pages.
SUBTITLE: Displays subtitle s.
HOLD/Freez: Freeze the current page.
SIZE: Change the picture size.
INDEX: Request index page when ind
In play state, press ZOOM,the player will zoom
in the picture one time.
ex isvalid.
* Teletext is no longer available, nor is
there any planfor areplacement teletext service
in NewZealand.For more information, please visit
the websites of the NewZealand channel providers.
However, oneteletext option, “closed captions”, is
still working on most NewZealandtelevision channels.
This service allows you to activate subtitles while
watching normal television programs that provide it.
TELETEXT MODE*
GVA15GLED

20
REMOTE CONTROL SETUP
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure
correct polarity marks”+”and “-” on the batteries match the diagram as shown within
the battery compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage
to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove
batteries when the remote is not used for a long time.
3. Recommend using ALKALINE type batteries.
20
Remote Control Setup
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct
polarity marks”+”and“-” on the batteries match the diagram as shown within the battery
compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
when the remote is not used for a long time.
3. Recommend using ALKALINE type batteries.
20
Remote Control Setup
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct
polarity marks”+”and “-”on the batteries match the diagram as shown within the battery
compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
when the remote is not used for a long time.
3. It is recommended that you use ALKALINE type batteries.