Gvoice TY-769 User manual

FCC ID:2AUMSTY-769
Model Name:TY-769

Gold Voice for You
1

Choose the right earplug
Choose your right earbuds
for the best sound.
Wear
Insert the earplug into your ear;
Rotate the earbuds to make
the microphone towards to
your mouth.
2

Remove the insulation sheet on
the bottom of the earbuds and
put the earbuds back into the
charging case charge it for
30 minutes. .If the charging
case shows a low battery, you
need to charge the charging
case.
Bluetooth pairing
Turn on phone Bluetooth,Open
the charging case and take out
the earbuds,Find
"Gvoice Delight V1" in the
Bluetooth device list.If a pairing
password is required, enter
"0000" or "000000";After
pairing success, the earbuds
will be automatically paired the
next time you when turn on the
earbuds(when the device not
deleted in the Bluetooth list).
Settings Bluetooth
09:00
Bluetooth
Gvoice Delight V1
NONAME
3

Android / iOS
system universal QR code
1. After download completed,
Permission to give software as
required, including but not
limited to "Location, Network,
Open Bluetooth, Open Map”;
2. Open the charging case;
3. The dialog box of
“Gvoice Delight V1” is
displayed on the screen.Click
"Connect" .
4. After the connection sucess,
the dialog box converts into a
pair of earbuds and a charging
box and will show the power of
the earbuds and the charging
box separately below.
5. Earbuds pair automatically
next time after connected
(Please do not delete in the
Bluetooth list)
Android system
pairing instructions
Connect
4

Android / iOS
system universal QR code
1.After download completed,
Give APP permission as
required, including but not
limited to "Location, Network,
Open Bluetooth, Open Map";
2.Open the APP and the charging
case;
3.The dialog box of
“Gvoice Delight V1” is
displayed on the screen.Click
"Connect" . (The system will boot
into the settings. Find
"Gvoice Delight V1" in list of
Bluetooth devices available and
click to connect).
4.After the connection sucess,
the dialog box converts into a
pair of earbuds and a charging
box and will show the power of
the earbuds and the charging
box separately below.
5.Earbuds pair automatically next
time after connected(Please do
not delete in the Bluetooth list) .
Connect
iOS system
pairing instructions
5

Tap twice on the left or right
ear Gvoice Delight V1,
answer the phone.
Tap twice the left or right
earbud to end the call.
Long press for 3 seconds
Gvoice Delight V1,
Refuse to answer the call.
Button function
description
When calling
During a call
6

When playing music
Tap twice left or right earbud:
Pause/Start.
Press left earbud:Next song;
Press right earbud:
Previous song.
Press the left earbud twice
quick:Volume +；
Press the right earbud twice
quick:Volume - .
When playing
music or standby
Long press for 3 seconds left
or right earbud,
Turn on the phone voice
assistant.
Long press for 5 seconds left
or right earbud,
trun off the earbuds.
7

Put the earphone into the charging
case and close the cover, the
earbuds will shut down
automatically.
The tap function needs to be at
least three seconds apart.
Note:
Charging
Put the earbuds into the charing
case.
75%- 100%
50%- 75%
25%- 50%
5%- 25%
0%- 5%
8

Positioning and searching
of earbuds and charging
bins
(need to be used with APP)
The APP will automatically record
the Bluetooth disconnected
position. If you lost earbuds you
can use the search function of the
APP to find the earbuds.
1.Open APP. The pattern of the
earbuds and the pattern of the
charging case will be displayed on
the map.Click on the pattern to
switch to the item you are looking
for.
2.Click on the device name below
to enter the map.
3.Click the "Vehicle" icon to enter
navigation mode.Follow the
navigation guide to find the
earbuds or the charging case.
(The positioning accuracy depends
on the positioning accuracy of the
phone).
4.When the phone is within 10
meters of the earbuds,pair the
earbuds with the phone,Click
“Play Sound” the earbuds will
beep,then you can find the earbuds.
My device
End
Drive Walk Bus Calling a car
GO
Start
2 minutes
2 min
meters
Fastest route
My position
9

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.