Gyswshh Winbox P1 APEX User manual

Winbox P1 APEX Instruction Manual
Content:
I Key Mapping Diagram
II Device Connection(wireless mode)
III Application Method of PS4 Console
IV Application Method of Switch Console
V Application Method of X1 Console
VI Instruction of Function Keys
VII COOV Manager of IOS / Android
VIII PC COOV Assistant
IX Automatic On-hook Function
X Double Function
XI More Functions
(DPI / Multiple-unit Mapping / Reduce Recoil)
XII Default Key and Mouse Configuration
XIII Firmware/Script Update

I Key diagram

①: Home key is equal to the Home key of Joypad
②: BT: Wireless pairing button
③: H1：The Mapping Key
④: H2：Combo Setting Key/Combination Setting Key
⑤: Two-in-one Headset Interface
⑥: Micro USB Interface (Connecting Console/power)
⑦: USB Interface(Connecting mouse/Joypad and so forth)
⑧: USB Interface(Connecting mouse/Joypad and so forth)
⑨: USB Interface(Connecting mouse/Joypad and so forth)
⑩: USB Interface(Connecting mouse/Joypad and so forth)
II Device Connection
Winbox P1 APEX exclusively supports three Wireless modes.
Wireless A Mode: P1 APEX wirelessly connects Console
Wireless B Mode: P1 APEX wirelessly connects IOS/Android APP(This
function starts automatically after power-on)
Wireless C Mode: P1 APEX wirelessly connects Bluetooth Joypad

The Joypad Matching Keys under Wireless C Mode:
III Application Method of PS4 Console
The factory default is USB cable mode:Connecting Keyboard, Mouse /
Joypad with PS4 Console
A、Disconnecting PS4 original Joypad bluetooth, the method: “Setting -
Peripheral Device - Bluetooth Device - Disconnecting the Joypad”(or applying
different PS4 account)

B.Inserting keyboard, mouse into the USB interface of Winbox P1 APEX.
C. Connecting the Winbox P1 APEX with PS4 USB interface by presented
special cable
D. After the indicator cycle flashing, waiting for 3 to 5 seconds and then
pressing the Home key on Winbox P1 APEX (some PS4 machines shall be
held for 1 second),After the Home button LED is always on, you can use the
mouse and keyboard to control the PS4 .
Note 1: The headset microphone function is only used in this USB cable
mode.
Note 2: only under the wire keyboard and mouse, the Wireless C Mode
functions could be ran. And the Joypad could be connected with P1
APEX wirelessly, as following method:
A. Disconnecting PS4 original Joypad bluetooth, the method: “Setting -
Peripheral Device - Bluetooth Device - Disconnecting the Joypad”(or applying
different PS4 account).
B. Connecting the Winbox P1 APEX with PS4 USB interface framework by
presented special cable
C. After the indicator cycle flashing, waiting for 3 to 5 seconds and
thenpressing the Home key on Winbox P1 APEX (some PS4 machines shall
be held for 1 second) . LED Lights of Home Key light.
D. Pressing the game Joypad bluetooth matching key and then press the P1
APEX BT key. After matching successfully, you could control the PS4 by
Joypad wirelessly. (Wireless C Mode)

2. Keyboard Mouse / Joypad Wirelessly Connecting PS4 Framework
(Wireless A Mode,Users need to go to the official website to download
and manually brush in this proprietary firmware.)
User pairing (required for first time use only):
1. Run PS4 and connect P1 APEX to PS4 with USB cable.
2. Wait for the PS4 host to automatically enter the user selection interface,
then remove the P1 APEX from the PS4 host.
User use:
1. Connect the mouse or mouse to the P1 APEX.
2. Connect P1 APEX to the power cable or charging treasure via USB cable
(powering P1 APEX).
3. The PS4 host automatically enters the user selection interface. After
selecting the user account with the mouse and keyboard, it can be used
normally.
IV Application Method of Switch Console
1.The factory default is USB cable mode:Connecting Keyboard, Mouse /
Joypad with Switch Console
A. Setting the "Pro Controller Wired Communication" in Switch system menu
as “ON”.

B. After entering into“System Settings-Controllers and Sensors-Disconnect
Controllers”B. disconnecting original Joypad bluetooth connection.
C. Inserting keyboard, mouse into the USB interface of Winbox P1 APEX.
D. Connecting the Winbox P1 APEX with Switch USB interface by presented
special cable (or USB interface of OTG wire).
E. After the indicator cycle flashing, waiting for 3 to 5 seconds and then
pressing the Home key on Winbox P1 APEX, After LED Lights of Home Key
light, you could control Switch by keyboard and mouse.

Note 1: The headset microphone function is only used in this USB cable
mode.
Note 2: only under the wire keyboard and mouse, the Wireless C Mode
functions could be realized. And the Joypad could be connected with P1
APEX wirelessly, as following method:
A. Setting the"Pro Controller Wired Communication" in Switch system menu as
“ON”.
B. After entering into“System Settings-Controllers and Sensors-Disconnect
Controllers”disconnecting original.
C. Connecting the Winbox P1 APEX with Switch USB interface by presented
special cable (or USB interface of OTG wire).
D. After the indicator light flashes, wait 3-5 seconds. Press the Home button on
the Winbox P1 APEX. The Home button LED is always on.
E. Press the Bluetooth pairing button on the Joypad, and then press the BT
button on the P1 APEX. After the pairing is successful, you can control the
wireless control Switch (Wireless C mode).
2. Keyboard Mouse / Joypad Wirelessly Connecting Switch Console
(Wireless A Mode,Users need to go to the official website to download
and manually brush in this proprietary firmware)

User use:
1. Connect the mouse or mouse to the P1 APEX.
2. Go to the settings "System Settings-Controllers and Sensors-Change
Grips/Order"
3. Connect P1 APEX to the power cable or charging treasure via USB cable
(powering P1 APEX).
4. Wait until the handle appears on the interface. Press the mouse F key to
confirm (ie the mapped handle A button), you can use it normally.
V Application Method of X1 Console
1. The factory default is USB cable mode:Keyboard mouse / Joypad
wired connection X1 Console
A. Inserting original X1 Joypad into Winbox P1 APEX USB interface by USB
Joypad cable
B. Inserting keyboard, mouse into the USB interface of Winbox P1 APEX.
C. Connecting the Winbox P1 APEX with Xbox one USB interface by
presented special cable.
D. After the indicator cycle flashing, waiting for 3 to 5 seconds and then

pressing the Home key on Winbox P1 APEX. After LED Lights of Home Key
light, you could control Xbox one by keyboard and mouse.
Connecting Keyboard and Mouse
Connecting Third-party Joypad
VI Statement of Function Keys
Home Key:
The Home Key function equals to PS4 Joypad / X1 Joypad / Switch
Joypad . After working normally, the red LED of Home key is lighting
constantly.
BT Bluetooth pairing button
Pairing: Press BT button (BT button LED blue light flashes), after pairing is
successful, BT button LED blue light is always on.
Re-pairing: Press the BT button again (BT button LED blue light flashes), after
the pairing is successful, the BT button LED blue light is always on.
Turn off Bluetooth: Press and hold the BT button. When the BT button LED is
off, the Bluetooth is off.
H1: Mapping Setting Key
The mapping key function is the keyboard shield function. The users could
modify the keyboard / mouse key mapping in line with the requirements.Please
connect the Joypad, mouse and keyboard by wire with the P1 APEX.

1. Pressing H1 key once and loosing (H1 yellow LED lamp is lighting
constantly)
2. Pressing keyboard / mouse key once
3. Pressing Joypad key once (the Joypad is connected with P1 APEX by cable)
4. After finishing the setting, pressing H1 key once to quit from the setting
model (H1 yellow LED lamp is extinguished)(you also could exist the setting
model by pressing H1 after setting all)
Clear All: pressing H1 key(H1 blue LED lamp is lighting constantly);then
holding(3 seconds)H1 key to clear all mappings and to quit from setting model
(H1 blue LED light extinguished)
For example:
Keyboard and Joypad Key:after pressing H1 key, please firstly press the K key
of keyboard, the Joypad A key and then press the H1 key to quit from the
setting model. Hence, the K key would be equipped with the functions of A key.
Keyboard and Joypad Left Rocker:after pressing H1 key, please firstly press
keyboard W key, push the Joypad rocker upward and then press the H1 key to
quit from setting model. Hence, the keyboard W key is armed with the function
of Joypad left rocker pushing upward.
Mouse Camera Movement and Joypad Right Rocker:after pressing H1 key,
please move the mouse, and then rotate Joypad right rocker. Hence, the
mouse movement could be with the movement functions of Joypad rocker.
Mouse Key and Joypad Key:after pressing H1 key, please firstly press the
mouse left key, Joypad L2 key and finally press H1 key to quit from the setting
model. Hence, the mouse left key is with the functions of Joypad L2 key.
H2: Combo Setting Key / Combination Setting Key
The Combo Setting Key could record a series of actions so as to realize the
combo attack and combination function as well as to carry out the combo
attack by designed key.
1.Pressing H2 key and loosing to enter into the Combo Setting Key setting
model (H2 green LED lamp is lighting constantly)
2.Implementing the combo attack operation, and the equipment would record
the operation automatically.
3.After finishing recording, re-pressing H2 key (H2 green LED lamp would light
constantly) and then setting the key for this combo attack / combination. After
setting successfully, it will carry forward the combo attack and the quit from the
setting model(H2 green LED lamp extinguishes)
4.Clear All: pressing H2 key (H2 green LED lamp is lighting constantly), and
the pressing (3 seconds) H2 key to clear all and quit from the setting model
(H2 green LED lamp extinguishes)
For example: after pressing H2 key, then pressing A, B, C, D four keys , H2 key
in succession and finally pressing E key to end the recording. E key is the
execute key for launching A, B, C, D combo attack.
Supporting Key:
a.All keys could be used to trigger except from HOME key and rocker.

All keys could record except from HOME key.
VII COOV Manager of IOS / Android
This software could provide the mobile side setting for Winbox P1 APEX and
other COOV Bluetooth Device including changing keys, upgrading, recovering,
sharing and mouse senior setting functions. All processes are real-time online
debugging Application. The users’ experience would be more convenient and
faster.
You could enter into official website www.mycoov.com - COOV Manager
page to download and install this software. Then you could use it in line
with the related statements.
VIII PC COOV Assistant
This software could provide the fast and convenient setting for COOV USB
Device, including changing keys, upgrading, recovering, sharing and mouse
setting functions. The users could enter into the official website
www.mycoov.come - the COOV Assistant download page to utilize this
software. You could use it by the related statement.
IX Automatic On-hook Function
This function is recording users’ practical operation as well as realizing the
infinite circulation function. Applying this function could realize the automatic
on-hook operation by one key.
Entering into official website www.mycoov.com - Winbox P1 APEX page to
download and utilize the “automatic on-hook special firmware”. According to
the related statements, you could apply for 6 to 60 min recording on-hook
function.

X Double Function
After connecting the third-party device, the Winbox P1 APEX could realize the
Double Function by matching the original Joypad.
(This double function only suits to PS4 / Switch).
XI More Functions
1.Mouse DPI Setting
Winbox P1 APEX is equipped with eight different mouse DPI selection which
even could be adjusted to 8000 DPI at most. The keyboard “Page Up”is to
improve the mouse sensitivity and “Page Down”is to reduce the mouse
sensitivity. Please press the keyboard “pause / break”key to save after
modification. Or you also could set it through PC COOV assistant.
2.Quadruplet Key Mapping
The default of Winbox P1 APEX is general keyboard and mouse key setting.At
the same time, P1 APEX has quadruplet key mapping setting which are
respectively key “F1, F2, F3, F4”. The default is F1 key. Before selecting the
key mapping, please select F1/F2/F3/F4 firstly and then pressing H1 to map.
The keyboard F1-F4 could shift different keyboard setting and all functions are
independent.
For example, pressing F2 key and then pressing H1 make the key mapping. Or
you also could press F3 and then H1 to make key mapping and so on.
3. Reduce Recoil Function
Winbox P1 APEX could adjust the ballistic trajectory by pressing effects to
realize Reduce Recoil. You could shift among three groups’ of Reduce Recoil.
Turn off Reduce Recoil: F5
Turn on / Shifting Reduce Recoil: F6-F8
The ballistic trajectory migrating downward (greatly): “-” key
The ballistic trajectory migrating upward (greatly): “+” key

The ballistic trajectory migrating downward (slightly): “【”key
The ballistic trajectory migrating upward (slightly):“】”key
For example, pressing F6 once to turn on Reduce Recoil, you could repeatedly
turn on and adjust the trajectory migrating effects by the four keys “-”, “+”, “【”,
“】” so as to realize Reduce Recoil. It will reserve automatically Reduce Recoil
operating after setting. By the same mean, it also suits to F7 and F8. During
the application process, the users could shift different Reduce Recoil setting by
pressing F6/7/8.
XII Default Key and Mouse Configuration

XIII Firmware/Script Update
Firmware Upgrade:
1.Entering into the official website (www.mycoov.com) to download and then
decompress the newest firmware package to the computer desktop.
2.Holding H2 and then inserting Winbox P1 APEX by the special cable
simultaneously. After loosing H2, “copy and replace”the file “firmware.bin”
in the folder to enter into Windox P1 APEX magnetic disk.
3.When the Winbox P1 APEX pops up automatically, it means the firmware
upgrading successfully.
Alternating Macro Function:
1. Entering into official website (www.mycoov.com) to download and depress
the required macro function to the desktop of the computer.
2.Holding H2 and inserting Winox P1 APEX into the computer by special cable
simultaneously. After losing H2 key, “copy and paste”the file “data.bin”in
the folder into Winbox P1 APEX.
Attachment: More functions related to third-party controllers, such as linear
control on and off, handle button combination function, please refer to other
COOV product manuals, such as N100 PRO.
Connection:
http://www.mycoov.com/upload/2018-05/16/COOVN100Progongnengmiji.pdf