H & F Technologies Audio 2000's AMW6304U User manual

2015

Rear panel
Front panel
(1) (2) (3) (4)(5) (6) (5)(7) (8) (9)
(10) (11) (12) (13) (14)
1
1
2
2
2
5
6
7
8
9

(9)
(10)
(11)
(1) (12) (13)
(1)
(2)(3)(4)
(5)
(6)
(7)
(8)
1
2
3
4
5
6
Orange
This button is tobe used asa power On/Off
switch and as a menu-navigation key. When the AWR6304U receiver power is off, press this
button steadily until the power is turned on. When the power is on, the LCD display will light up.
While the power is on, press this button steadily until the power is turned off. While the power is
on, this button is used to navigate among the menu icons on the LCD display (pressing this
button once each time to navigate one menu icon at a time).

5. Check theRF signal receptionindicator ( ) (refer to numeral 5 on page 4). If there
is no RFsignal ( ), proceed to nextsection (Section C). If the RF signal is present
( ), changethe wireless frequency of this AWR6304U receiver. Repeat thisstep
until no RFsignal ( ) showing on thisreceiver.
Receiver
Transmitter
Receiver
Transmitter