Habey HB131 User manual

HABEYHB131
Mini-ITXMotherboard
UserManual V1.0

SafetyInstructions
1Pleasereadthismanualcarefullybeforeusingthisproduct.
2Putallunused oruninstalled boards/cardsinastaticdissipativesurfaceorstaticshielding
bag.
3Alwaysgroundyourselftoremoveanystaticdischargebeforetouchingtheboard,
toplaceyourhandson groundingmetal object forawhileorwearagroundingwrist
strapatalltimes.
4When taking orfetching theboardsorcards,pleasewearantistaticglovesand havethe
habit ofholding thecardsbyedges.
5Makesurethat yourpowersupplyissettothecorrect voltageinyourarea.Incorrectvoltage
maycausepersonalinjuriesanddamagethesystem.
6Toprevent electronicshockhazardoranydamagetotheproduct,pleaseensure
thatall powercablesforthedevicesareunplugged when addingorremoving
devicesorreconfiguringthesystem.
7Toprevent electricalshockhazard,disconnect thepowercablefromthe
electrical outletbeforerelocatingthesystem.
8When addingorremovingdevicestoorfromthesystem, ensurethat all the
powercablesforthedevicesareunplugged inadvance.
9Topreventanyunnecessarydamagetotheproductsduetofrequentpoweron/off,please
wait atleast30secondstorestarttheunitaftertheshutdown.
10 Ifsystemgoeswrongduring theoperation,donottrytofixitbyyourself. Contact
aqualified servicetechnician oryourretailer.
11 Thisproduct belongstoClass A, whichmaycauseradiointerference.Inthissituation,users
need totakemeasuresagainsttheradiointerference.

Contents
Chapter1Product Introduction......................................................................................................1
1.1Specifications.................................................................................................................1
Chapter2Installation Instructions.................................................................................................3
2.1InterfacesLocation &Dimension.....................................................................................3
2.2InstallationSteps...............................................................................................................3
2.3Install Memory...................................................................................................................4
2.4JumperSettings................................................................................................................4
2.4.1 CMOSClear/HoldJumperSetting（JCC）.........................................................4
2.4.2HardwareSwitchforSystemAutoBootupon PowerOn（JAT）........................6
2.4.3 COM2JumperSetting（J1，J2）........................................................................6
2.4.4LVDSRated VoltageSelect Jumper（J8）...........................................................7
2.5InterfacesDescription.......................................................................................................8
2.5.1 SATAPorts（SATA1, SATA2, PWR_OUT）........................................................8
2.5.2Serial Ports（COM1, COM2-COM6）................................................................10
2.5.3DisplayInterfaces（VGA,LVDS,JVGA）..........................................................11
2.5.4 LVDSBacklight Control Interface（J5、J8）.....................................................13
2.5.5 LAN_USB Port（USB_LAN1，USB_LAN2，USB56，USB78，） .....................14
2.5.6KeyboardandMouseInterface（KBMS）..........................................................15
2.5.7GPIO（JGP）......................................................................................................16
2.5.8PowerInterface（ATX）......................................................................................17
2.5.9FANInterface（CPU_FAN）...............................................................................18
2.5.10JLPCInterface（JLPC）...................................................................................19
2.5.11 Audio（JACK_HDA, FP_AUDIO）...................................................................20
2.5.12Parallel Port（LPT)............................................................................................21
2.5.13Front Panel Connector（JFP）.........................................................................22
2.5.14SO-DIMMSlot（SO-DIMM）............................................................................24
2.5.15Expansion Interface（PCI, MINI_PCIE)............................................................24
Chapter3BIOSSETUP............................................................................................................25
AMIBIOSUpgrading............................................................................................................25

AMIBIOSDescription...........................................................................................................25
BIOSSettings........................................................................................................................25
3.1MainMenu......................................................................................................................26
3.2Advanced Menu..............................................................................................................27
3.2.1ACPISettings.......................................................................................................27
3.2.2APMConfiguration...............................................................................................28
3.2.3CPUConfiguration...............................................................................................29
3.2.4SATAConfiguration..............................................................................................30
3.2.5USB Configuration................................................................................................31
3.2.6SupperIOConfiguration......................................................................................33
3.2.7H/WMonitor..........................................................................................................35
3.2.8Serial Port ConsoleRedirection...........................................................................36
3.3ChipsetMenu..................................................................................................................36
3.3.1NorthBridge.........................................................................................................37
3.3.2SouthBridge.........................................................................................................38
3.4BootMenu.......................................................................................................................39
3.5SecurityMenu.................................................................................................................40
3.6Save&ExitMenu...........................................................................................................41
Appendix.......................................................................................................................................42
Appendix1: Watchdog ProgrammingGuide.......................................................................42
Appendix2:IRQ&SystemMemoryMap,1st MBMemoryMap..........................................43
Appendix3: Glossary..........................................................................................................45
Appendix4:InstallDriver......................................................................................................48

Chapter1. Product
Introduction

HABEYHB131 Intel CedarTrailPoweredMini-ITXMotherboard
1
Chapter1ProductIntroduction
1.1Specifications
FormFactor
StandardMini-ITXMotherboard
Dimension
170mm×170mm（L×W）
CPU
Onboard CedarTrail-D
Chipset
Intel NM10
Display
GPU: VGA + LVDS
VGA:1xstandardDB15VGA,resolution upto1920×1200@60Hz
LVDS:1xstandardsinglechannel 18/24bitLVDS.D2000 seriessupportLVDSresolutionup
to1440×900@60Hz
Memory
1xsinglechannel SO-DIMMslot supportsDDRⅢ800/1066memoryupto4GB.
Storage
2xstandard7Pin SATAports
LAN
2xstandardRJ45LANports
Transferrate:10/100/1000Mbps
USB
Provide8xUSB2.0ports

HABEYHB131 Intel CedarTrailPoweredMini-ITXMotherboard
2
External4xstandardUSB2.0ports;two2×5PinUSB2.54 header,tobeconvertedto
standard4xUSB2.0ports.
I/0
AdoptW83627DHG-PI/OChip
6xserial ports:1xDB9serial portsandfive 2*5PIN Header.COM1_COM6supportRS232.
COM2alsosupportsRS485. COM2-COM6provide5V/ 12Vpowersupply.
1xLPCexpansion interface
PowerSupply
Standard ATX20Pin
Watchdog
Triggersystemreset
BIOS
2MBSPI BIOS
Environment
OperatingTemperature: 0 ～60
StorageTemperature:-40℃～85℃
OperatingHumidity: 5%~95%,non-condensing

Chapter2. Installation
Instructions

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
3
Chapter2InstallationInstructions
2.1InterfacesLocation &Dimension
Followingpictureillustratestheinterfaceslocation anddimension of boardHB131. Pleasetake
careofsomecomponentsduringtheinstallation.Improperinstallation mayleadstosystem
failure.
Note: Incaseofanyelectrostaticdamagecausedtosomecomponents,pleasewearanti-static
glovestoinstallthemotherboard.
HABEYHB131InterfacesLocation&Dimension
2.2Installation Steps
Pleaserefertofollowingstepstoassembleyourcomputer:
1Adjustall JumpersonboardHABEYHB131accordingtotheusermanual.
2InstallMemory
3Installotherexpansioncards

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
4
4Connectallsignal lines, cables, control panelcircuitandpowersupplyunit.
5StartthecomputerandcompleteBIOSSettings.
KeycomponentsofthismotherboardareIntegratedcircuit,and thesecomponents
couldbeeasilydamagedbyelectrostaticinfluence.So,beforeinstalling thisunit, please
always keep thefollowingprecautionsinmind:
1Holdtheboardbyedgesanddon’ttouchanycomponents,plugsorsocketpins.
2Wearanti-staticgloves/wriststrapwhiletouchingtheintegrated circuitcomponents,suchas
CPU, RAM,etc.
3Put thoseunusedoruninstalledcomponentsinstaticshieldingbagsortrays.
4Pleasefirst checkthepowerswitchisoffbeforeconnectingthepowerplug.
2.3Install Memory
Boardprovides1xDDRIIImemoryslot.Pleasepayattentiontofollowingtwopointswhen
installing thememorybank:
1.AlignthenotchoftheDIMMmemorybankwiththatof thesocket.Insertthememorybank
intothesocketandpress thememorybankverticallyandevenlyon bothsidesuntilthe
memorybankentersintotheslot.
2. Select thememorybankthatmatchesyourmotherboard
2.4JumperSettings
Pleaserefertofollowing instructionstodojumpersettingsbeforeinstalling yourhardware
devices.
Remark:HowtoidentifythePIN1ofalljumpersandinterfaces:Pleaseobservethewordmark
on thesideof theplugsocket, whichwill bea “1”orboldlineortriangularsymbol;Andplease
lookat thebackofPCB, eachwithasquareshapewillbethePIN1; andallthejumpers’PIN1
haveawhitearrowon theside.
2.4.1 CMOSClear/HoldJumperSetting （JCC）
CMOSispoweredbytheonboardbutton cell.ClearCMOSwill leadtopermanentelimination
of previoussystemsettings（factorydefault）.
Steps: （1）Turnoffthecomputer,disconnectpowersupply
（2）UsejumperCap JCC Pin1-2shortfor5~6seconds,t
hen restorethedefaultsetting

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
5
withPin2-3connected.
（3）Startthecomputer,then press “Del”toenterBIOSsettingandreloadoptimal
defaults.
（4）SaveandExit
JCC：
Setting JCC
1-2 ClearCMOS,BIOSbacktofactorydefault
2-3 Normalstatus,systemdefault
DonotclearCMOSwhen thecomputerispoweron, otherwise,itwillcause
damageto themotherboard !

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
6
2.4.2HardwareSwitchforSystemAutoBootuponPowerON（JAT）
JAT:
Setting JAT
Open Disableautoboot
Close EnableAutoBoot
2.4.3 COM2JumperSetting（J1,J2）
J1, J2jumpersareused toconfigureCOM2transmission mode. COM2supports
RS232/RS485.Systemdefaults[RS232].

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
7
2.4.4LVDSRatedVoltageSelectJumper（J8）
Pleasefirst checktheLVDSrated workvoltagebeforeusingit.
COM2RS232（default）
COM2RS485
J1 1-32-4 J1 3-54-6
J2 1-2 J2 3-45-6
J1
J2

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
8
J8:
Setting 3.3V 5V
J8 1-2 2-3
2.5InterfacesDescription
Please read thismanual carefullybeforeinstalling anyexternalconnectors, in case
ofanydamageto themotherboard!
2.5.1 SATAPorts（SATA1,SATA2,PWR_OUT）
Boardprovides2xstandard7PinSATAports.One5PinSATA_PWRinterface（PWR_OUT）to
providepowersupplytoSATAHDD.

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
9
SATA:
Pin Signal Name
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
PWR_OUT:
Pin Signal Name
1 +12V
2 GND
3 VCC
4 GND

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
10
5 VCC3
Note: SATA2&MINIPCISSDarealternative.If MINIPCIEport supportsSSD, then SATA2port
willbedisabled.Systemdefaults[SATA2] portisenabled,MINIPCIESSDdisabled.
2.5.2SerialPorts（COM1, COM2-COM6）
Boardprovides6xserial ports.1xstandardDB9serial port. 5x 2*5PIN Header.COM1_COM6
support RS232. COM2alsosupportsRS485.
COM1:
Pin Signal Name
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
COM1
COM2-COM6

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
11
9 RI
COM2_COM6:
Signal Name Pin Signal Name
DCD 1 2 DSR
SIN 3 4 RTS
SOUT 5 6 CTS
DTR 7 8 RI
GND 9 10 PIN10
COM2(RS232/RS485),Pinsdefinedasbelow:
Pin RS232（Default）
RS485
1 DCD DATA-
2 DSR NC
3 RXD DATA+
4 RTS NC
5 TXD NC
6 CTS NC
7 DTR NC
8 RI NC
9 GND GND
10 PIN10 PIN10
Note: PIN10definecan select12V, 5VorGND.12V/5Visprovided viaJ9jumper.
PIN10Setting 5V 12V Default
J9 1-2 2-3 Open
COMPoweroutputthrough customcablefromPIN1/PIN9ofDB9oranyPinassignedby
customer.
2.5.3DisplayInterfaces （VGA,LVDS,JVGA）
OnestandardDB15VGAdisplayport.Onestandardsinglechannel18/24bitLVDS.Reserve
one2×5PinVGAheaderoptional.

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
12
VGA:
Pin Signal Name
Pin
Signal Name
Pin Signal Name
1 RED 6 GND 11 NC
2 GREEN 7 GND 12 SDA
3 BLUE 8 GND 13 HSYNC
4 NC 9 +5V 14 VSYNC
5 GND 10 GND 15 SCL
LVDS:
Signal Name Pin Signal Name
VDD_PANEL 1 2 VDD_PANEL
GND 3 4 GND
LVDS_TX0_DN 5 6 LVDS_DDC_DATA
LVDS_TX0_DP 7 8 LVDS_DDC_CLK
GND 9 10 GND
LVDS_TX1_DN 11 12 LVDS_CLK_DN
LVDS_TX1_DP 13 14 LVDS_CLK_DP
GND 15 16 GND
LVDS_TX2_DN 17 18 LVDS_TX3_DN
VGA
LVDS
JVGA

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
13
LVDS_TX2_DP 19 20 LVDS_TX3_DP
JVGA:
Signal Name Pin Signal Name
RED 1 2 GND
GREEN 3 4 SDA
BLUE 5 6 HSYNC
GND 7 8 VSYNC
VGA_PIN5 9 10 VGA_SCL_R
2.5.4 LVDSBacklightControlInterface（J5,J8）
J5:
Pin Signal Name
1 +12V
2 BKLT_EN
3 GND
4 BKLT_CTRL
5 +5V
J5
J8

HABEYHB131 Intel CedarTrail PoweredMini-ITXMotherboard
14
ForJ8definition,pleaserefertoChapter2-section 2.4.4LVDSrated voltageselectjumper
setting.
2.5.5 LAN_USB （USB_LAN1,USB_LAN2, USB56,USB78，）
ExternalUSB&LANports,twoseparatesocketsprovide2xstandardUSB2.0portsand1x
standardRJ45 LANport. USB_56/USB_78 areinternal USBports.Two2×5Pinheaderare
abletobeconverted to4xstandardUSB ports.Therewill beoneLEDlampon eachsideofthe
RJ-45 LANport.Theyellowoneindicatesdatatransferstatus.Thegreen oneindicates
networklinkstatus.
StandardUSB Port:
Pin Signal Name
1 +5V
2 USB DATA-
3 USB DATA+
4 GND
USB_56:
USB56,USB78
USB_LAN1
USB_LAN2