Haier HMV1652 User manual

Microwave Oven
Four Micro-Onde
Horno Microondas
Installation Instructions
Instructions d’installation
Instrucciones De Instalación
HMV1652
Part # 0570000005

1
TABLE OF CONTENTS
MICROWAVE SAFETY .........................................................................................2
INSTALLATION REQUIREMENTS.........................................................................4
Tools and Parts............................................................................................................... 4
LOCATION REQUIREMENTS................................................................................ 5
ELECTRICAL REQUIREMENTS............................................................................. 6
INSTALLATION INSTRUCTIONS.......................................................................... 7
Step 1 – Unpacking ........................................................................................................ 7
Step 2 - Locate Wall Studs............................................................................................. 8
Step 3 - Prepare Over-Microwave Cabinet .................................................................. 8
Step 4 - Align Wall-Mounting Plate .............................................................................10
Step 5 - Determine Installation Method.....................................................................11
Step 6 - Install Microwave Oven..................................................................................12
Step 6 - Install or Replace Charcoal Filter...................................................................27
Step 7 - Complete Installation ....................................................................................28
RECORD KEEPING
Thank you for purchasing this Haier
product. This user manual will help you
get the best performance from your
new microwave.
For future reference, record the model
and serial number located on the inside
frame of the microwave, and the date
of purchase.
Staple your proof of purchase to this
manual to aid in obtaining warranty
service if needed.
___________________________________
Model number
___________________________________
Serial number
___________________________________
Date of purchase

2
MICROWAVE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
DANGER
WARNING
CAUTION
This is the safety alert symbol.
This symbol alerts you to potential hazards that can
kill or hurt you and others. All safety messages will
follow the safety alert symbol and either the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
An imminently hazardous situation. You
could be killed or seriously injured if you
don’t immediately follow instructions.
A potentially hazardous situation
which, if not avoided, could result in
death or serious bodily injury.
A potentially hazardous situation
which, if not avoided, may result in
moderate or minor injury.
All safety messages will tell you what the potential hazard is, tell you
how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.

3
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: 
or damage when using the microwave oven, follow basic precautions,
including the following:
• Read all instructions before using
the microwave oven.
• This appliance must be properly
grounded to avoid severe or fatal
shock.
• 
grounded outlet. The installer
must perform a ground
continuity check on the power
outlet box before beginning the
installation to insure that the
outlet box is properly grounded.
If not properly grounded, or
if the outlet box does not
meet electrical requirements
noted (under ELECTRICAL

electrician should be employed

• The power cord of this
appliance is equipped with a


(grounding) wall receptacle
to minimize the possibility of
electric shock hazard from this
appliance.
• You should have the wall
receptacle and circuit checked

sure the receptacle is properly
grounded. Where a standard
two-prong wall receptacle
is encountered, it is very
important to have it replaced

wall receptacle, installed by a

• Do not, under any
circumstances, cut, deform
or remove any of the
prongs from the power
cord. Do not use with an
extension cord.
• Remove house fuse or
open circuit breaker before
beginning installation to
avoid severe or fatal shock

• The mounting surface must
be capable of supporting
the cabinet load, in addition
to the added weight of this
63–85 pound (28.5– 38.5
kg) product, plus additional
oven loads of up to 50
pounds (22.7 kg) or a total
weight of 113–135 pounds
(51.3–61.2 kg).
• This product cannot
be installed in cabinet
arrangements such as an
island or a peninsula. It
must be mounted to BOTH
a top cabinet AND a wall.
• It is recommended that two
people install this product.
READ AND SAVE THESE
INSTRUCTIONS

4
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
PARTS PROVIDED
Wood Screws
(¼“ x 2“)
Toggle Bolts (and wing nuts)

Self-Aligning Machine Screws
(¼“-28 x 3¼“)
TOP CABINET TEMPLATE
REAR WALL TEMPLATE
Nylon Grommet
(for metal cabinets)
Top Cabinet Template Rear Wall Template
INSTALLATION
INSTRUCTIONS
Installation Instructions Separately Packed
Grease Filters
Exhaust Adaptor
Glass Tray Turntable Ring
TOOLS AND MATERIALS NEEDED
• Phillips Screwdriver
• Pencil
• Ruler or Tape Measure and Straight
Edge
• Carpenter Square (optional)
• Tin Snips (for cutting damper, if
required)
• Scissors (to cut template, if
necessary)
• 
bits
• Filler blocks or scrap wood pieces,
if needed for top cabinet spacing
(used on recessed bottom cabinet
installations only)
• Gloves
• Saw (saber, hole or keyhole)
• Stud Finder or Hammer (optional)
• Safety Goggles
• Level
• Duct and Masking tape

5
LOCATION REQUIREMENTS
Backsplash
66" (167.6 cm)
or more from
the floor to the
top of the
microwave
30" (76.2 cm)
2
" (5.1 cm)
30"
(76.2 cm)
min.
16½" (41.9 cm)
Bottom edge of
cabinet needs to be
30" (76.2 cm) or
more from the
cooking surface
NOTES:
• The space between the cabinets must be 30” (76.2 cm) wide and free of
obstructions.
• If you are going to vent the microwave oven to the outside, see “Install
Microwave Oven” for exhaust and duct preparation.
• 
follow the instructions on the top cabinet template for power cord clearance.

6
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
Observe all governing codes and ordinances.
Product rating is 120 volts AC, 60 Hertz and 1550 watts. This product must be
connected to a supply circuit of the proper voltage and frequency.
The power supply cord and plug should be brought to a separate 15 to 20 ampere
branch circuit single grounded outlet.
The outlet box should be located in the cabinet above the microwave oven.

conform to the National Electrical Code or the prevailing local code.
GROUNDING INSTRUCTIONS
For all cord connected
appliances:
The microwave oven must be
grounded. In the event of an
electrical short circuit, grounding
reduces the risk of electric
shock by providing an escape
wire for the electric current. The
microwave oven is equipped with
a cord having a grounding wire
with a grounding plug. The plug
must be plugged into an outlet
that is properly installed and
grounded.
WARNING: Improper use of
the grounding plug can result
in a risk of electric shock.

or serviceman if the grounding
instructions are not completely
understood, or if doubt exists as
to whether the microwave oven
is properly grounded.
Do not use an extension cord.
If the power supply cord is too

or serviceman install an outlet
near the microwave oven.
SAVE THESE INSTRUCTIONS

7
INSTALLATION INSTRUCTIONS
STEP 1 – UNPACKING
WARNING
Excessive Weight Hazard
Use two or more people to move and install microwave oven.
Failure to do so can result in back or other injury.
1. Using two or more people move the microwave to near the location where it is to
be installed.
2. 
bag. Do not remove the foam packaging from the front of the oven.
3. 
oven and carton over onto the top. The oven should be resting in the foam
packaging.
a
b
a Styrofoam
b Carton
4. 
5. Cut the middle of plastic bag to remove the mounting plate. This plate will be
used as the rear wall template and for mounting.
a
b
a Screws
b Mounting Plate
(Rear Wall Template)

8
6. Remove the screws from the mounting plate. Reinstall the screws into the holes
from where they were removed.
STEP 2 - LOCATE WALL STUDS
IMPORTANT: The microwave must be connected to at least one wall stud.
1. Find the studs, using one of the following methods:

OR

solid sound indicates a stud location.
2. 


mark.
3. Draw a line down the center of the studs.
STEP 3 - PREPARE OVER-MICROWAVE CABINET
Overhead cabinet styles vary. Follow the instructions that apply for the cabinet
style in your home.
IMPORTANT: Disconnect power to outlet.
BENEATH FLAT-BOTTOM CABINET
1. Draw a vertical line on the wall at the center of the 30” (76.2 cm) wide space.
2. Tape the Mounting Plate/Rear Wall Template onto the wall matching the
centerline and touching the bottom of the cabinet.
16½"
a
a Center Line