Haier LE24F7000 User manual

LE24F7000

Stand Assemble Instruction 15
14
13

If you are going to clean the product,Unplug the TV,use
soft fabric,no water,never chemicals.
Note:the use of apparatus in moderate climates.

5.2x2 W
mc06
16:9
E-waste Guideline Manual
Warranty Card
QSG
Note:This product uses a panel consisting of sub pixels which require sophisticated technology to
produce. However, there may be a few bright or dark pixels on the screen. These pixels will have
no impact on the performance of the product.
1xYPbPr
1xAV
TV 48.25 MHz – 863.25 MHzFrequency
1920x1080

Y
POWER
POWER

Y

480i/480P 60
1
502
3
4
Signal format
576i/576P
720P 50/60
1080i/1080P 50/60
640*480
720*400 70 31.50
47.70
31.5060
5
6 1920x1080 60 67.5

Y
TV
1

9
（These models do not support）

10
Installation Guide
The First Time Setup screen will appear when the
TV is first switched on or reset to the factory
setting.
Press the ▼▲ buttons to navigate the menu and
buttons to change the settings. Select your
desired language, Home/Shop Mode to be
displayed on the menu.
▲
▲
Home or Shop modes
When the unit is turn on for the very first time, it
will show Initialization set-up menu. After the
OSD language is set, the user can choose between
"shop mode" and "home mode".
When the screen shows the following setting menu
and the cursor stays on the "home mode" choice,
press to adjust, and "OK" to enter the menu.
Choose "OK" to enter the next prompt Auto
Tuning.
ATV

11
Fav
FAV
You can adjust the OSD Language, Aspect Ratio,
Blue Screen, Reset, Software Update(USB), Shop Mode,
CEC.
Medium
Standard

12

13
ATTENTION:
1. USB HDD compatibility is not assured.
2. Some format video is not played for some file reason.
3. Haier will not bear any responsibility for saving
facility quality problemor date missing.
Source Lock:Lock the input source which you want.
Default Source:Set the default input source when
tuning on your TV.
Max Volume:Set max volume limited,this option
allows you to set the max volume level.
Default Volume:Power on default volume,press the
button to select the default volume.
Default Prog: Set the default input prog when tuning on
Key Lock:Lock the key button with TV.
Please press “MENU” button first,and press number
button “1001” to enter into Hotel mode, then press
select “On” or “Off”.“ ” button to
your TV.
Clear Lock:Recall the default settings in Hotel mode.
Export Settings:Export hotel settings to USB device.
Import Settings:Import hotel settings from USB device.
Channel Lock : Lock the channel in the manu page.

Installation the TVStand Assemble Instruction2.
Attach the stand base set to the bottom of the TV by firmly tightening the
supplied 6pcs screws.