Haier XPB76-113 Series User manual

Maximum/64 Medium/54 Minimum/44
Haier Manual XPB76-113S Front
XPB76-113 Series
Drain Water hose
7.6 / 5.5 kg
W 810 x D 500 x H 970
DRAIN
Two piece
GENTLE, NORMAL or STRONG position.
GENTLE
STRONG
NORMAL
After complete draining, set the WASH SELECTOR at
STRONG , NORMAL, GENTLE . If it is set at DRAIN it will
be rather difficult for the frozen water to melt.
Turn
Medium
Turn
Haier Customer Care Toll Free (24x7)-1800-200-9999, 1800-102-9999 SMS:’Haier’ to 56677
Website: www.haier.com/in/ www.facebook.com/haierindia
*Source Euromonitor International Limited; retail volume sales in unit based on 2012 data.
Cover a spout of tap with gauze or white towel as a filter
run the water for about 2 minutes. If gauze or white towel
becomes brown, please leave the water running until the rust
does not flow out.
Do not operate the washer without the Service Hatch,
it can cause injury.
60 Months
Building No-1, Okhla Industrial Estate, Phase III, New Delhi-110020
Tel. : [phone]. Fax : [phone], Website : www.haier.com/in
Building No-1, Okhla Industrial Estate, Phase III, New Delhi-20
Ph: 011-39496000, 30674000. Fax : [phone], Website : www.haier.com/in
P. Limited,
P. Limited,
Plastic Parts,Top Lids,
Drain Pipe, Inlet Pipe,
Lint Filter
16) Demo will be done only on demand.
Building No-1, Okhla Industrial Estate, Phase III, New Delhi-110020
P. Limited,
1800-200-9999, 1800-102-9999

It is suggested to use foamless washing powder.
Haier Manual XPB76-113S Back
DRAIN
WASH-RINSE
DRAIN
SELECTOR
Figure 5
Please don’t use the washer in the environment below 0°C. If the washer is
below 0°C, the washer’s water inlet/draining system will be frozen and will
result in damaged of whole machine. If the washer has below 0°C, please
be sure to ensure that washer is placed under room temperatures for
2-4 hours and then use.
Figure 5
STRONG
4
3
Haier Warranty Terms & Conditions
High
Medium
Low
H
M
L
The new hose-sets supplied with the appliance are
to be used and that old hose-sets should not be reused.
Wash Timer
Water Inlet
Hanging Hook
Wash Lid
Water Inlet
select
Control
Panel
Spin
Timer
Drain
Hose
Spin
Lid
Filter
Water-fall Outlet
Pulsator
Cabined
Spin-dry
Inner Lid
Spin-dry
Basket
Base
Power
Cord
Insert water inlet pipe
towards wash side water
inlet of control panel.
WASH-RINSE
DRAIN
SELECTOR
STRONG
Wash/Soak Timer
(To set to below 2 minute,
first set to 6 minute then
turn it back. It can increase
the service life of the timer)
Wash selector
(Gentle wash speed,
Normal wash speed
Strong wash speed)
Spin Timer
(to set to below 1
minute, first set to 2
minute then turn it back.
It can increase the
service life of the timer)
Drain Selector
After washing, the buzzer
will ring. Set the Drain
Selector at DRAIN.
Insert water inlet pipe towards spin side
water inlet of control panel. Fill water for
about 1 minute. If the water quantity filled
is too large, the water may flow out from
the wash tub side. Please twist the water
tab to limit the water filling.