Hailink MX42NN00R User manual

4x2 HDMI Matrix
User Manual
MX42NN00R
Full 3D Pass-through
Support IR Control

INTRODUCTION
•1 x HDMI 4 by 2 Matrix unit
•1 x Remote
•1 x 5V DC power supply
•1 x User Manual
•HDMI, HDCP 1.2 and DVI compliant
•Support full 3D pass-through
•Support high resolution up to 1080P
•Super IR control system, IR transport channel can be forward or backward
per your installation
•Support CEC bypass
•External and internal EDID settings
FEATURES
PACKAGE CONTENTS
The 4x2 HDMI Matrix is designed to work as a switcher for multiple Audio
and Videosources and displays. It is capable of switching HDMI signals
between four sources and two displays. Because it is a matrix switch, any or
all of the 4 inputs can simultaneously be switched to any or all of the 2 outputs.
This device will support high definition video in multiple resolutions of up to
1080P. With IR Remote control options, you can enjoy easy and comfortable
operation via this unit. This matrix is HDCP Compliant making it is perfect for ,
all HDMI devices PC monitors, Plasma TV displays and HDTVs.
The Matrix offers solutions for HDTV, STB, DVD, home theater, projector
manufacture plant environments testing, data center, information distribution,
conference room presentation, school and corporate training environments,
AV installation etc.

PANEL DESCRIPTION
Front Panel
Rear Panel
H D M I
Matrix 4 to 2
1
Input 3 Input 4 Output 1 Output 2
Input 2
ON
OFF
Input 1
2IR IR Ext
IR Channel
HDMI out 1 HDMI out 2
1
1
1
1
2
2
2
2
3
45
3
3
4
5
4
4
5
5 6
6
7
7
3
HDMI INPUT LED
HDMI OUTPUT LED
IR OUTPUT
BUILT-IN IR
IR EXTENDED INPUT
POWER SWITCH BUTTON
DC 5V
HDMI Input
HDMI Input 1 HDMI Input 2 HDMI Input 3 HDMI Input 4
HDMI Output
HDMI Output1 HDMI Output2 SPDIF L
R
HDMI INTPUT DISPLAY AND BUTTON
HDMI INPUT
HDMI OUPUT
R/L ANALOG AUDIO OUTPUT
POWER SUPPLY INPUT
OPTICAL TOSLINK DIGITAL AUDIO OUTPUT

INSTALLATION
CONNECTION DIAGRAM
•Connect HDMI input ports to the signal source equipments such as DVD
player, Blue-ray player, Set-top box etc. You can press each HDMI INPUT
DISAPLY BUTTON repeatedly to choose the HDMI input source you want to
display.
•Connect each HDMI output ports to the HDMI displays or monitors.
•Connect to an amplifier or active speaker for audio output.
•Connect to IR output ports with the IR blaster cable (not included in the
package）for IR signal transmission. Place the IR blaster in direct line-of-
sight of the equipment to be controlled.
•Connect to the IR receiver cable (not included in the package) for IR signal
reception. Make sure that the remote being used is in direct line-of-sight
of the IR receiver.
•You can control the device using a supplied Remote by pointing to the
built-in IR sensor.
•Connect to the IR extender iutput with the IR extender cable (optional)
if you need to extend the distance of using the remote.
•Plug the 5VDC power supply into the unit and connect the adaptor to
AC outlet.
DC 5V
IN
IR
OUT
IR
CEC
IN
IR
OUT
IR
CEC
H D M I
Matrix 4 to 2
1
Input3 Input4 Output1 Output2
Input 2
ON
OFF
Input1
2IR IR Ext
IR Channel
HDMIout 1 HDMIout 2
DC5V
HDMIInput
HDMIInput 1 HDMIInput 2HDMI Input 3 HDMIInput 4
HDMIOutput
HDMIOutput5 HDMIOutput6
HDMIOutput
SPDIF L
R
08：08 PLAY
09：08 PLAY 07：08 PL AY
06：08 PLAY

Input Port
Output Port
Bandwidth
Output Resolution
Operating Temperature
Deep Color
Chassis
Dimension
Weight
Power Supply
SPECIFICATION
4xHDMI(Female connector), 1xIR Channel
2xHDMI(Female connector),
1xOptical Toslink Channel
1xAnalog Audio Channel,
2xIR Channels
10.2Gbps
480i~1080P@50/60,1080P@24/50/60,
VGA~UXGA
-15℃~55℃/5°F~131°F
36bit
Metal
275mm(L)x150mm(W)x30mm(H)
1014g
DC 5V

Please read the following safety precautions carefully before you unpack
and install this equipment.
1.Do not expose the unit to rain, moisture or any other dripping liquids. And
keep it away from any wet locations such as fishing tanks, vases.
2.Do not install the unit close to fire or any other heat sources.
3.Keep the unit in dry and ventilated area. Do not install in bookcase,
cabinet or any other confined space.
4.Stop using the unit during thundering or lightening storms.
5.Avoid the power cable to be stepped on or pinched. Position the unit
carefully to avoid damage or accident.
6.Clean the unit only with dry cloth.
7.Only use accessories specified by the manufacturer.
8.Unplug the equipment when unused for a long period of time.
9.Do not try to open any non-serviceable parts. Contact your authorized
servicing center and personnel.
SAFETY PRECAUTIONS
Tel:[phone]
Fax:[phone]
Email:[email protected]
Http:www.hailink.cn
Danger Electric
Shock Risk
Keep Dry
Keep Away
from Heat