HAISEN HB001VCR-1A User manual
Sensor & Intelligent Control
Mounting Height
Max.4m/13.12ft Ceiling Mounted
Detection Range
Max. Diameter 10m/32.8ft Ceiling Mounted
Function Setting
DIP Switch/Remote Control
Microwave Power
＜0.3mW
Microwave Frequency
5.8GHz±75MHz
Motion Detection
0.5-1m/s
Operating Temperature
-20°C~+60°C
IP Rating
IP20
Warranty
5 years
Operating Current
<30mA
Stand-by power
＜0.5W
Control Method
ON/OFF 0-10V DIMING
Detection Angle
150° Wall mounted 360° ceiling mounted
Detection Angle
DIP switch : 50%/100% Remote control : 25%/50%/75%/100%
Hold Time
DIP switch :10s/1min/5min/10min Remote control : 5s/30s/1min/3min/5min10min/20min/30min
Daylight Threshold
DIP switch :10Lux/30Lux/50Lux/Disable Remote control :2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
Stand-by period
DIP switch :1min/ 30min/ 60min/+∞Remote control : 0s/10s/30s/1min/ 5min/10min/ 30min/ 60min/+∞
Stand-by dimming level
DIP switch :10% 20% 30% 50% Remote control :10% 20% 30% 50%
Connection Type
Quick Connector
Technical Data
Operating Voltage
DC:10.5-15V
On/Off Control Detection Area Daylight Sensor Hold Time
Warranty Stand-by period Stand-by dimming level
Remote Control
DC input , Rod antenna
HB001VCR-1A HB001VCR-2A
Automatic On/off control with Daylight sensor. DC input Compact sized particularly suitable for Tri-proof light 5 year warranty.
HB001VCR-1AHB001VCR-2A
Detection Patterns
Sensor & Intelligent Control
Mechanical structure
Dimensions
Wiring Diagram
Unit:mm
1
2
3
4
Detection Angle
5
6
7
8
9
15 6 7 8 9
2 3
44
LED Driver
1
1
12 23
3
4
34 4 56 5 60
2
5
0.5-1.0M/S
Ceiling Mounted
Mounting
Height
Antenna module
IR Receiver日光感应器
Daylight Sensor Hold Time
Installation Hole Stand-by dimming level
Stand-by Period
Daylight Threshold
Well Detected Area
Possibly Detected Area
Highest mounting height is 4m
This figure indicates the maximum distance at
the highest mounting height with 100%
sensitivity.
Sensor & Intelligent Control
Installation Method
DIP Switch Setting
Switch UP
Switch DOWN
Stand-by
period
Stand-by
dimming level
Daylight Threshold
Hold-Time
Detection Area
Definition of the ambient brightness; only when the ambi-ent
brightness is lower than the preset specific lux amount, the
sensor will work; when it's preset as "disable",the sensor
works everytime it detects motion regardless the ambient
brightness.
The period of light keeping low output before it's completely
switched off. When it's preset as"∞“ , the light always keep
at low output if no movement in the detection area and
doesn't turn off.
The definition of low output in the standby period.
The period of light keeping 100% brightness after moving
objects leave the detection area.
In this area, movement will be detected and able to trigger
the sensor. 100% detection area is also known as the strong
sensitvity.
5s
30s
1min
10min
Disable
50lux
10lux
2lux
10%
20%
30%
50%
50%
100%
0s
30s
20min
Sensor & Intelligent Control
Performance
1.Automatically ON/OFF function
With sufficient daylight, even
when motion detected, light
remains OFF.
With insufficient daylight, the
sensor turns light ON when
motion gets detected.
The sensor turns OFF light
automatically after the
hold time when there's no
motion detected.
2.Daylight Disable
When daylight threshold
is preset as "disable", the
sensor turns light ON
when motion gets detect-
ed, and OFF after hold-
time.
The sensor turns light ON
when motion gets detected.
The sensor keeps light ON
for holdtime period after
motion leaves.
The sensor turns OFF light
automatically after the
holdtime.
3.Corridor Function, Bi-level Dimmable
With sufficient daylight,
the sensor keeps light
OFF even motion gets
detected.
With insufficient
daylight,
the sensor turns light
ON when motion gets
detected.
The sensor turns OFF
light automatically
after the standby
period when there's no
motion detected.
After there's no motion
detected, the sensor
keeps light ON 100% for
holdtime.
After holdtime, sensor
dims light to standby
dimming level for
standby period.
Hold time
Stand-by
period
Hold time
Hold time
Sensor & Intelligent Control
1. Please read the instructions carefully before using this product and keep it well for all
users to read at any time.
2. The sensor should be installed by qualified electrician and ensure power is off before the
installation.
3. We reserve the right to modify any incorrect text, image and necessary technical param-
eters.
4. Any unauthorized modification is forbidden, otherwise all guarantees will be immediately
invalid.
Attention
Installation precautions
1. Microwave sensor can be installed in any lamp except the one with full metal shell.
2. The detected surface cannot be shielded by metal objects.
3. Make sure the microwave module is completely exposed outside.
4. The detection surface of the sensor module shall be installed facing the detection area.
5. Should be kept away from the driver to avoid interference genera-tion and lamp flashing.
6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.
Application Environment
1. Suitable for indoor installation to avoid false triggering due to exter-nal factors such as rain, wind or tree swing.
2. Shall not be installed in the place with all four metal shelters and small space (such as galvanized-iron roof ).
3. Shall note be mounted installation, so as to avoid false trigger caused by the lamp itself shaking.
4. Shall not be installed next to large operating machines such as venti-lator/ceiling fan to avoid false triggering caused by
machine vibration.
User Notes
1.Microwave can penetrate walls or glass thinner than ＜20mm and attenuate if thicker than ＜20mm.
2.The driver voltage shall be stable and float within 10%.
3.Detection area will be affected by speed of motion, mounting height and movement volume.
4.Conduct test on sunny days without the lampshade which will affect the tested lux value.
Briefing of Button Functions
Buttons Function
Model: HDOSR
Performance
,nn
5'
,nn m 10
IUU . � 0'
m---Lux
a
HISEN®
HOW TO
USE HD05R
+ -
+-
DIMMING
+-
This manual suits for next models
1
Table of contents
