Haltian Thingsee GATEWAY GLOBAL Manual

User and Installation Guide
GATEWAY GLOBAL
v.20.01

Welcome to use Thingsee IoT Solution Suite
Congratulations on choosing Haltian Thingsee as your IoT solution.
We at Haltian want to make IoT easy and accessible for everyone, so
we have created a solution platform that is easy to use, scalable and
secure. I hope our solution will help you achieve your business goals!
Pasi Leipälä
CEO, Haltian Oy
Thingsee GATEWAY GLOBAL
Thingsee GATEWAY GLOBAL is a plug & play IoT gateway device for large
scale IoT solutions. It can be connected anywhere in the world with its
LTE Cat M1/NB-IoT and 2G cellular support. The main role of Thingsee
GATEWAY GLOBAL is to ensure that data flows continuously, reliably
and safely from the sensors to the cloud.
Thingsee GATEWAY GLOBAL connects a mesh of a few to hundreds of
wireless sensor devices to Thingsee Operations Cloud. It exchanges
data with the mesh network and sends data to cloud backends.

Note before installation
Sales package content
Thingsee GATEWAY GLOBAL
• Includes SIM card and managed SIM subscription
Power supply unit SYS1561-1105 (micro-USB)
AC-plug
User and installation guide
Install the gateway to a secure location. In public places, install the
gateway behind locked doors.
To ensure strong enough signal strength for data delivery, keep the
maximum distance between mesh network devices under 20 m.
< 20 m
< 20 m
If the distance between a measuring sensor and the gateway is > 20m
or if the sensors are separated by a fire door or other thick building
materials, use extra sensors as routers.
> 20 m
< 20 m < 20 m
SENSOR
SENSOR
ROUTER
GATEWAY

Thingsee installation network structure
Maximum amount of sensors per one gateway varies between 50 to 100
pcs, depending on the mesh network traic load.
To ensure mesh network data flow, a second gateway can be installed
on the other side of the installation site.
Network communication
Data flow
Thingsee devices build a network automatically. Devices communicate
all the time to adjust the network structure for eective data delivery.
Sensors create subnetworks for data delivery by choosing the best
possible route based on signal strength. The subnetwork chooses the
strongest possible gateway connection for data delivery to the cloud.
The customer network is closed and secure. It cannot be harmed by
third party connections.

Things to avoid in installation
• Escalators
• Electrical transformers
• Thick electrical wires
• Fluorescent lamps
• Thick fire doors
• Thick concrete structures
Installation
Please make sure the Thingsee GATEWAY GLOBAL is installed before
you install the sensors.
To identify the gateway, read the QR code on the backside of the
device with a QR code reader or Thingsee installation application on
your mobile device.
Identifying the device is not necessary, but it will help you keep track of
your IoT installation and help Haltian support to solve possible issues.
QR code
To identify the device over Thingsee API, please follow the link for further
information.
https://support.haltian.com/api/open-services-api/api-sequences/
Data Integration
Make sure that data integration has been properly setup prior to the in-
stallation process. See link https://support.haltian.com. Thingsee data
can be pulled (subscribed) from the Thingsee Cloud live data stream, or
the data can be pushed to your defined end point (e.g. Azure IoT Hub
before you install the sensors.)

Connect the power source to the gateway and plug it into a wall socket
with 24/7 power.
Note: always use the power source included in the sales package
Note: The socket-outlet for the power source shall be installed near
the equipment and shall be easily accessible.
Thingsee GATEWAY GLOBAL is always cellular connected:
LED indication is used to provide gateway status information.
To close the device press the Power button for 3 seconds.
When released, device starts the shutdown process, red LED indication
5 times during a 2 second period. When in shutdown state, no LED
indication.
To restart the device press the power button once and the LED
sequence starts again.
The LED on top of the device starts to blink:
• RED blink – device is connecting to mobile network
• RED/GREEN blink – device is connecting to Thingsee cloud
• GREEN blink – device is connected to the mobile network
and Thingsee cloud and is operating correctly.

Device info
Recommended operating temperature: 0 °C … +40 °C
Operating humidity: 8 % … 90 % RH non-condensing
Storage temperature: 0°C … +25 °C
Storage humidity: 5 % … 95 % RH non-condensing
IP rating grade: IP40
Indoor oice use only
Certifications: CE, FCC, ISED and RoHS compliant
BT with Wirepas mesh network support
Radio sensitivity: -95 dBm BTLE
Wireless Range 5-25 m indoor, up to 100 m Line of Sight
Cellular networks
• LTE Cat M1/NB-IoT
• GSM 850 MHz
• E-GSM 900 MHz
• DCS 1800 MHz
• PCS 1900 MHz
Micro SIM card slot
• Includes SIM card and managed SIM subscription
LED indication for device status
Power button
Micro USB powered
Size: width 105,8 mm, length 62,8 mm, height 16,5 mm
Weight: 43 g
Maximum transmit power
Supported
radio networks
Operating
frequency bands
Max. transmitted
radio frequency power
LTE Cat M1 2, 3, 4, 5, 8, 12,
13, 20, 26, 28
+23 dBm
LTE NB-IOT 2, 3, 4, 5, 8, 12,
13, 20, 26, 28
+23 dBm
2G GPRS/EGPRS 850/900 MHz +33/27 dBm
2G GPRS/EGPRS 1800/1900 MHz +30/26 dBm
Wirepas mesh ISM 2.4 GHz ISM 2.4 GHz

CERTIFICATION INFORMATION
EU DECLARATION OF CONFORMITY
Hereby, Haltian Products Oy declares that the radio equipment type
Thingsee GATEWAY GLOBAL is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is available at the
following internet address: www.haltian.com
Haltian Products Oy vakuuttaa, että radiolaitetyyppi
Thingsee GATEWAY GLOBAL on direktiivin 2014/53/EU mukainen.
EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti
on saatavilla seuraavassa internetosoitteessa: www.haltian.com
Thingsee GATEWAY GLOBAL operates at Bluetooth® 2.4 GHz frequency,
GSM 850/900 MHz, GSM 1800/1900 MHz bands and LTE Cat M1/ NB-IoT
2, 3, 4, 5 ,8, 12, 13, 20, 26, 28 bands. Maximum radio-frequency powers
transmitted are +4.0 dBm, +33.0 dBm and +30.0 dBm, respectively.
Manufacturer name and address:
Haltian Products Oy
Yrttipellontie 1 D
90230 Oulu
Finland

FCC REQUIREMENTS FOR OPERATION IN THE UNITED STATES
FCC Information for the User
This product does not contain any user serviceable components and is
to be used with approved, internal antennas only. Any product changes
of modifications will invalidate all applicable regulatory certifications
and approvals.
FCC Guidelines for human Exposure
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance of 20 cm between the radiator
and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment uses and can
radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encour-
aged to try to correct the interference by one or more of the following
methods:
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an electrical outlet on a circuit dierent
from that which the radio receiver is connected
• Consult the dealer or and experienced radio/TV technician for help
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to oper-
ate this equipment.

FCC compliance statement:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED)
REGULATORY INFORMATION
This device complies with RSS-247 of the Innovation, Science and
Economic Development Canada (ISED) Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Ce dispositif est conforme à la nor me CNR-247 d’Innovation, Sciences
et Développent économique Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudicia-
ble, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un
brouillage susceptible de provoquer un fonctionnement indésirable
Radiation Exposure Statement:
This device complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment must be installed and used
with a minimum distance of 20 cm between the radiator and your body.
NOTE IMPORTANTE: Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonne-
ments ISED établies pour un environnement non contrôlé. Cet équipe-
ment doit être installé et utilisé avec une distance minimale de 20 cm
entre le radiateur et votre corps.
FCC ID: 2AEU3TSGWGBL
IC: 20236-TSGWGBL

SAFETY GUIDE
Read these simple guidelines. Not following them may be dangerous
or against local laws and regulations. For further information, read the
user guide and visit https://www.haltian.com
Usage
Do not cover the device as it may prevent the device from operating
properly.
Safety distance
Due to radio frequency exposure limits the gateway should be installed
and operated with a minimum distance of 20 cm between the device
and the body of the user or nearby persons.
Care and maintenance
Handle your device with care. The following suggestions help you keep
your device operational.
• Do not open, dismantle or modify the device. Unauthorized
modifications may damage the device and violate regulations
governing radio devices. If the device is opened by an unauthorized
representative, the warranty will be null and void.
• Do not store the device in wet or humid conditions.
• Do not drop, knock, or shake the device. Rough handling can break
it.
• Only use a so, clean, dry cloth to clean the surface of the device.
Do not clean the device with solvents, toxic chemicals or strong
detergents as they may damage your device and void the warranty.
• Do not paint the device. Paint can prevent proper operation.
Failure to comply with the instructions may cause damage to the
device.

Damage
If the device is damaged contact [e-mail]. Only qualified
personnel may repair this device.
Small children
Your device is not a toy. It may contain small parts. Keep them out of
the reach of small children.
Interference with medical devices
The device may emit radio waves, which could aect the operation of
nearby electronics, including cardiac pacemakers, hearing aids and
defibrillators. If you have a pacemaker or other implanted medical
device, do not use the device without first consulting your doctor or the
manufacturer of your medical device. Maintain a safe distance between
the device and your medical devices and stop using the device if you
observe a persistent interference with your medical device.

RECYCLING
Check the local regulations for proper disposal of electronic products.
The Directive on Waste Electrical and Electronic Equipment (WEEE),
which entered into force as European law on 13th February 2003,
resulted in a major change in the treatment of electrical equipment at
end-of-life. The purpose of this Directive is, as a first priority, the preven-
tion of WEEE, and in addition, to promote the reuse, recycling and other
forms of recovery of such wastes so as to reduce disposal.
The crossed-out wheelie-bin symbol on your product, battery,
literature, or packaging reminds you that all electrical and electronic
products and batteries must be taken to separate collection at the end
of their working life. Do not dispose of these products as unsorted mu-
nicipal waste: take them for recycling. For info on your nearest recycling
point, check with your local waste authority.

Get to know other Thingsee devices
Thingsee ENVIRONMENT Thingsee DISTANCE
Thingsee GATEWAY
LAN
Thingsee ANGLE
RUGGED
Thingsee ENVIRONMENT
RUGGED
Thingsee GATEWAY
GLOBAL
Thingsee GATEWAY
Thingsee LEAKAGE
RUGGED
For all devices and more information, visit our website
www.haltian.com or contact [email protected]om
Thingsee PRESENCE
Thingsee AIR Thingsee BEAM