FieldServer ProtoNode FPC-N64 User manual
1
ProtoNode FPC-N64 GATEWAY for Interfacing Hunter
Commercial TRAK Fans Quick Start
Port R1 - RS-485 To Modbus RTU Fans
Port R2 - RS-485 Field Protocol to Local Network
Power Input 9-30VDC
ETH1 – Ethernet Field Protocol to Local Network
ETH2 – Ethernet to Modbus TCP/IP Fans
120V/240V
AC Power
FAN #
1
HMI/FAN
CONTROLLER
Modbus Splitter
CAT 5E
FAN #
2
FAN #
3
C OM 4
C OM 1
C OM 2 C OM 3
C OM 4
C OM 1
C OM 2 C OM 3
CAT 5E
CAT 5E
CAT 5E
Modbus Splitter
C OM 4
C OM 1
C OM 2 C OM 3
Modbus Splitter
CAT 5E
CAT 5E
CAT 5E
Modbus
Address 1
Modbus
Address 2
Modbus
Address 3
1
2
4 5
7 8
BMS
CAT 5E
Modbus RTU –
BACnet Gateway
Figure 1 – Sample 3-
2
•Whether the system is 1--Fan, each Modbus RTU fan interfaces with the ProtoNode
of the
from the fan
shows a 3-
CAT 5E
124
5
7
8
Modbus RTU –
BACnet Gateway
To Modbus
Splitter
Figure 2 –
1. -over-
Modbus
RTU Fan
Pins
Pinout
FieldServer
ProtoNode
Pin Label
Pin
Blue-Solid,
Blue-Stripe+ L
GND -
Stripe, Brown-Solid- N -
Figure 3 –
- Strip pin 4 (Blue--of the ethernet cable
terminal
- Strip pin 7 (Brown--of the ethernet cable and connect to -N
terminal - Ground
3
2.
Modbus
RTU Fan
Pins
Pinout
FieldServer
ProtoNode
Pin Label
Pin
Transmit
Pin 1
-Stripe
TX+
RS-
Receive
Pin 2
-Solid
RX-
RS--
Shield
GND
RS-
Figure 4 – RS-
- -
Gateway for RS-
- -- R1 terminal of the
Gateway for RS--
- -R1 terminal of the Gateway for RS-
3.
-
as shown in
CAT5E
124
5
7
8
Modbus RTU –
BACnet Gateway
FAN#1
C OM4
C OM1
C OM2 C OM3
Modbus Splitter
CAT5E
Modbus
Address 1
120V/240V
AC Power
–
4
Figure 6 –
4. local
ETH1(LAN) to Local PC PC
Figure 7 –
192.168.1.24, Subnet Mask is 255.255.255.0
““
“““Internet Protocol Version 4
192.168.1.59, Subnet mask
255.255.255.0
5.
Open a web browser and connect to the FieldServer’s default IP Address: 192.168.1.24
Username
use Default Password listed on the
6.
6
7
Fan
main page
Te st
To start
Select speed 1-10
Select brightness level 1-
10
Other FieldServer Gateway manuals
