Hama 173665 User manual
00
173665
Inductive Charger
Induktivladegerät
D
GB
Operating Instructions
Bedienungsanleitung
A
B
12
2
Controls and Displays
1. Connection socket
2. Status LED
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you sell the device, please pass these
operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicatesafety instructionsor to draw your attention to specichazards
andrisks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
•Inductive Charger
•Micro-USB cable
•These operating instructions
3. Safety Notes
•The product is intended for private, non-commercial use only.
•Protect the product from dirt, moisture and overheating, and only use it in a dry
environment.
•Do not drop the product and do not expose it to any major shocks.
•Do not operate the product outside the power limits given in the specications.
•Do not open the device or continue to operate it if it becomes damaged.
•Do not use the product in areas where the use of electronic devices is not permitted.
•In order to prevent damage caused by overheating, make sure the product is not covered
by textiles, metal or other objects.
GOperating instruction
3
•Dispose of packaging material immediately according to locally applicable regulations.
•Do not modify the product in any way. Doing so voids the warranty.
Do not put any bank cards or similar cards with magnetic strips, or other magnetically
sensitive objects, on the product. The data on the cards could be damaged or deleted.
4. Getting Started and Operation
Note
•For charging a terminal device with the induction charger, your terminal device has
to be compatible with the induction charging technology. Please read the operating
instructions of your device.
•Please note that mobile phone sleeves, covers, etc. and other materials between the
induction charger and the backside of your terminal device disturb or prevent actually
the charging process.
•Connect the included Micro-USB cable to the Micro-USB input (1) on the charging
station and to a suitable USB charger.
•Please refer to the operating instructions for the USB charger used.
•When the power supply is active, the status LED (2) briey lights up.
Warning
•Only use suitable charging devices or USB connections for charging.
•As a rule, do not use charging devices or USB connections that are defective and do not
try to repair them yourself.
•Insert your terminal device with the back on the charging station (B).
•Charging starts as soon as an effective induction eld has been generated. The status LED
(2) then shows a constant light in an other colour. The current charging status appears on
your terminal device.
4
•If no connection can be established through induction, you may have to change the
position of your terminal device (B).
•Charging stops automatically once your device’s battery is fully charged. The status LED
(2) changes its colour.
•Remove your terminal device from the charging station and disconnect the station from
the power supply.
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
8. Technical Data
Inductive Charger
Input 5V 2A
Output 5V max. 1A
Dimensions 14 x89 x 89 mm
Table of contents
