Hamamatsu Photonics E717-74 User manual

The E717-74 is a compact D type socket assembly designed
for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMT).
The overall length is most short as compared to conventional type.
MAXIMUM RATINGS
CHARACTERISTICS (at 25 °C)
●Pin Output
●Compact and Lightweight
COMPACT D TYPE
SOCKET ASSEMBLY
E717-74
Figure 1: Circuit Diagram
TACCC0134EA
R1 to R10
C1 to C3
: 330 kΩ
: 10 nF SIGNAL
OUTPUT (A)
-HV (K)
P
K
GND (G)
SOCKET
PIN No.
* "Wiring diagram applies when -HV is supplied."
To supply +HV,connect the pin "G" to+HV, and the pin "K" to the GND.
PMT
11123456789 10
C3
R10R9R8R7R6R5R4R3R2R1
Dy9Dy8Dy7Dy6Dy5Dy4Dy3Dy2Dy1
C2C1
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Parameter Description/Value Unit
Supply Voltage between Case and Terminals
Supply Voltage between Power Supply Terminals
Divider Current (at -1500 V Supply Voltage)
Power Consumption (at -1500 V Supply Voltage)
Operating Ambient Temperature
Storage Temperature
1500
-1500
0.46
682
0 to +50
-15 to +60
V
V
mA
mW
°C
°C
Parameter Description/Value Unit
Insulation Resistance between Case and Terminals
Leakage Current in Signal A
Total Voltage Divider Resistance
Maximum Linear Output in DC Mode B
Output Signal
Weight
Min.
Max.
NOTE: AAt -1000 V supply voltage between power supply terminals.
BThe current at which output of PMT deviates by ±5 % from the linearity.
1 ×1011
1 ×10-10
3.3
22
DC/Pulse
10
Ω
A
MΩ
µA
—
g
SPECIFICATIONS
FEATURES

TACC1037E01
JUN. 2006. IP
COMPACT D TYPE SOCKET ASSEMBLY
E717-74
Figure 2: Dimensional Outline (Unit: mm)
Figure 3: Suggested Printed Circuit Board Layout (Unit: mm)
Figure 4: Fixing the Socket to the Chassis
TACCC0133EA
TACCC0132EA
TACCA0277EA
22.4±0.2
26.0±0.2
32.0±0.5
26.0±0.2 32.0±0.5
2
7 2.7
14.0±0.5
30°
10°
0.7
4- 2.8
HOUSING
(INSULATOR)
R13
K
A
G
TOP VIEW SIDE VIEW BOTTOM VIEW
Fixing the socket to the chassis as illustrated is rec-
ommended because the stress of PMT insertion and
removal may damage the parts on the PC board.
M2.6 SCREWSM2.6 SCREWS PC BOARDPC BOARD
M2.6 NUTS
CHASSIS
CHASSIS
SPACERS SOLDERING
M2.6 screws, M2.6 nuts and printed
circuit board is to be funished by user.
26
26
22.7 MIN.
4- 3
3- 0.9
K
DIRECTION OF LIGHT
BOTTOM VIEW
G
A
30°
10°
R13
M2.6 SCREWS PRINTED CIRCUIT BOARD
t=2.4 mm MAX.
M2.6 NUTS
SOLDERING
PRINTED CIRCUIT BOARD
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: [phone], Fax: [phone]
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone] E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone] E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone] E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone] E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: [phone], Fax: [phone] E-mail: [email protected]
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone] E-mail: [email protected]
WEB SITE www.hamamatsu.com