Hamilton/Buhl HDV5200-1 User manual

HDV5200-1
Quick Reference Guide
1. Components of the Video Camera
Display Menu/On/Off Button
LED Light On/Off Button
Mode Selection (Movie/Picture/Playback) Button
Power On/Off Button
Menu Button
Recording On/Off Button
Zoom-In / Up Arrow Button
OK Button
Function Indicating Light
Mini HDMI Interface
SD Card Slot
Shutter Button
USB Interface
AV Interface
TFT-LCD Screen
Built-In Speaker
Left Arrow Button
Zoom-Out / Down Arrow Button
Right Arrow / Self-Timer Button
Wrist Strap Hole
Tripod Mounting Hole
Battery Compartment Cover
Self-Timer Indicating Light
Lens
Built-In LED Light
Microphone
1
2
3
4
56
7
8
10
11
12
13
16
17
18
19
15
9
14
20 21 22
23
24
25
26
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.

2. Preparations before operating the camcorder
Charging the Battery
1. Make sure lithium battery is properly inserted in the battery compartment
2. Fully charge the camcorder via USB charger prior to use
Installing the memory card
There is no built-in memory in this camera. A compatible external memory card is required to take or save
pictures and movies. If you want to shoot and save the les, please use a proper SD or MMC card.
Before inserting or taking out the card, please turn off the unit rst to avoid any damage.
Before inserting the card, please ensure to insert in the correct direction. If you feel resistance, please do
not forcibly insert the card. The memory card is equipped with a write protection switch to avoid any
unintentional data deletions. Therefore, if you want to save or delete les, please place the write
protection in off position.
1. Make sure to turn off the camcorder.
2. At the end of the camera, there is a rubber cover for SD card; open this cover you will see the
SD card slot.
3. Insert the memory card as shown in the sketch.
4. Close the SD rubber cover.
• To take out the memory card, slightly press the edge of the memory card, then release, the card
will be ejected out.