Hamlet XIDESAPCB User manual

SATA to IDE
IDE Adapter for SATA HDD
QUICK INSTALLATION GUIDE
XIDESAPCB
www.hamletcom.com

Dear Customer,
thanks for choosing an Hamlet product. Please carefully
follow the instructions for its use and maintenance and,
once this item has run its life span, we kindly ask You to
dispose of it in an environmentally friendly way, by
putting it in the separate bins for electrical/electronic waste, or to
bring it back to your retailer who will collect it for free.
We inform You this product is manufactured with materials and
components in compliance with EEC Directives, ROHS directives:
2002/95/CE and with RAEE Directives: 2003/96/CE, Italian
Legislative Decree 2005/151.
System Requirements
•Available 4-pin power supply connector
•Computer with IDE host interface
•Serial ATA HDD
Package Contents
•SATA to IDE Adapter
•Power cable
•Quick installation guide
Trademarks
All trademarks and company names mentioned in this manual are
used for description purpose only and remain property of their
respective owners.
Changes
The material in this document is for information only and subject to
change without notice. Hamlet reserves the right to make changes
or revisions in the product design or the product manual without
reservation and without obligation to notify any person of such
revisions and changes.

Installation
General instructions for installing the adapter are provided below.
Please refer to your computer’s user manual for further information,
if needed. No driver is required to install the SATA to IDE Adapter.
1. Connect the Ultra ATA/IDE cable to the 40-pin IDE connector
and power cable to the 4-pin power connector of the adapter.
2. Connect the SATA connector of the adapter to the Hard Disk
SATA interface.
WARNING!
Use only the power cord supplied with the product. A
different cable causes damage to the adapter and hard
drive connected.