HAMPTON BAY FALKNER HDP15142 User manual

USE AND CARE GUIDE
FALKNER FLOOR LAMP
Item # 1006 832 179
Model # HDP15142
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this oor lamp. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

Table of Contents
Safety Information
Warranty
IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred during
shipping. If there is a defect in the wire, do not continue the
assembly process.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU
HAVE ANY ELECTRICAL QUESTIONS. If you have any non-
electrical questions about this xture, please call our
Customer Service Team at 1-855-HD-HAMPTON or visit
HAMPTONBAY.COM. Please reference your SKU
(1006 832 179) or UPC (053392151423).
READ AND SAVE THESE INSTRUCTIONS.
THREE (3) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this xture to be free from defects in materials and workmanship for a period of three (3) years from date of
purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product
is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modications, alteration,
neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of
an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This
warranty shall not apply to the nish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and
tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specically disclaims any warranty, whether expressed or implied, of tness for a particular purpose,
other than the warranty contained herein. The manufacturer specically disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit HAMPTONBAY.COM.
Table of Contents............................................................ 2
Safety Information.......................................................... 2
Warranty...........................................................................2
Three (3) Year Warranty.............................................................. 2
What is Covered..........................................................................2
What is Not Covered................................................................... 2
Pre-Assembly.................................................................. 3
Planning Assembly...................................................................... 3
Package Contents....................................................................... 3
Assembly..................................................................... 4, 5
Care and Cleaning.......................................................... 6
Troubleshooting.............................................................. 6
Service Parts................................................................... 7
Model.......................................................................................... 7
2
□This product has been manufactured with the highest
standards of safety and quality.
□For energy savings, this portable luminaire has been
engineered to safely use a self-ballasted compact LED bulb in
place of an incandescent bulb.
□Before assembling your portable luminaire, spread all parts out
on a clean surface. Inspect each part for defects that may have
occurred during shipping.

Pre-Assembly
IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred
during shipping. If there is a defect in the wire, do not
attempt installation. Please call the Customer Service
Team at 1-855-HD-HAMPTON.
NOTE: You can use one 120V, 60Hz, 100-Watt Max. medium
base (E26) type “A” bulb (sold separately).
Do not exceed the recommended wattage.
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
3
PACKAGE CONTENTS
Part Description Quantity
F
G
H
I
Upper pole 1
1
Lower pole
Middle pole
1
Base 1
J Power cord 1
Part Description Quantity
A Finial
Shade
1
B 1
C Harp 1
D Socket 1
A
B
C
D
E
F
G
H
I
J
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
E Harp holder (Pre-assembled on the socket (D)) 1

I
H
G
F
D
D
F
G
I
J
Assembly
4
□
□
□
Screw the lower pole (H) to the top of the base (I).
Screw the middle pole (G) to the top of the lower pole (H).
□
□
Pull the excess power cord (J) through the base (I).
Screw the upper pole (F) to the top of the middle pole (G).
1 Assembling the middle & lower poles
Screw the upper pole (F) to the bottom of the socket (D).
2Assembling the upper pole
3 Connecting the pole and socket assembly
NOTE: Do not twist the power cord (J).

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
C
B
AD
J
Switch
Bulb
(Sold separately)
E
Assembly (continued)
5
□
□
Squeeze the legs of the harp (C) together and insert the two ends
between the prongs of the harp holder (E).
Place the shade (B) onto the harp (C), then secure the shade (B)
to the harp (C) with the nial (A).
□
□
Screw one 120V, 60Hz, 100-Watt Max. medium base (E26) type A
bulb (sold separately) into the socket (D).
Plug the power cord (J) into the outlet, and turn on the switch.
4 Assembling the harp and the shade 5 Installing the light bulb
NOTE: Remove the plastic cover before using this shade (B).

6
Troubleshooting
□Use a dry, soft cloth to dust or wipe carefully.
□Do not clean with abrasive materials, bleach, or solvents.
Problem Possible Cause Solution
The lights will not turn on. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
The cord is not plugged in. Ensure the cord is plugged into an outlet.
The circuit breaker is off. Ensure the circuit breaker is set in the “ON” position.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
There is an exposed wire. Discontinue use of the lamp. Unplug the unit from the wall.
Contact a qualied electrician or call the Customer Service
Team at 1-855-HD-HAMPTON.
Care and Cleaning

A
B
C
MODEL: HDP15142
Part Description Quantity
A Finial 1
B Shade 1
C Harp 1
7
Service Parts
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM