HAMPTON BAY 10856 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this rock fountain-oasis. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Item # 210-272
Model # 10856
USE AND CARE GUIDE
ROCK FOUNTAIN-OASIS
Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM

2
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Pre-Assembly ................................................................3
Planning for Successful Assembly...........................................3
Package Contents ....................................................................4
Assembly ....................................................................... 5
Operation ....................................................................... 7
Maintenance.................................................................. 7
Care and Cleaning ........................................................ 7
Troubleshooting............................................................ 8
Safety Information
1. Use only a UL-approved extension cord of the correct
rating to avoid overheating.
2. The fountain is for outdoor decorative use only.
3. The fountain is designed to function with water only.
4. This fountain pump is not intended for commercial use.
5. The water in the fountain is not safe to drink.
DANGER: To reduce the risk of electrical shock,
always disconnect the power supply before working
with the fountain.
DANGER: If the plug or your wall receptacle gets
wet, due to water dripping down the power cord or
any other reason, do not remove the plug from the
wall outlet until the circuit breaker is turned off.
DANGER: If the fountain falls into the water
accidentally, turn off the circuit breaker
immediately.
WARNING: Do not tamper with the pump/cord
assembly. Pump model number: WP-650
WARNING: Connect the fountain only to a
grounded outdoor power outlet of 120V- 60Hz.
WARNING: Do not operate the fountain if the
pump has been dropped or has a damaged power
cord or plug. Do not attempt to repair a damaged
power cord. Request a replacement cord from your
supplier.
WARNING: Children can fall into the fountain and
drown. Keep children away from the fountain if it
contains any amount of liquid.
CAUTION: Do not leave a running fountain
unattended.
CAUTION: Keep the fountain away from small
children and pets.
CAUTION: Do not use attachments which are not
provided by the manufacturer since they may cause
an unsafe condition.
IMPORTANT: Allow the pump power cord to hang
at a lower level than the wall outlet to form a “drip
loop”. This prevents water from dripping down the
power cord and getting into the wall outlet.
IMPORTANT: Keep the power cord away from
high temperatures or heat sources.
IMPORTANT: Only use the fountain with the
pump, transformer, and adapter provided.
IMPORTANT: Do not place any items on the edge
of the bowl, such as a potted plant. Excessive
weight or pressure on any of the fountain sections
may cause it to tip or fall over.

3 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Assembly
PLANNING FOR SUCCESSFUL ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-
abrasive surface such as carpet or cardboard.
Place the fountain near an outdoor GFCI (Ground Fault Circuit
Interrupter) electrical connection.
IMPORTANT: Do not place the fountain on or near any
surface that can be damaged by water.
NOTE: More than one person may be required to
complete the assembly of this product.

4
Pre-Assembly (continued)
PACKAGE CONTENTS
C
D
B
A
Part Description Quantity
A
Base 1
B Pump 1
C Top 1
D Pump cove
r
1

5 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly
1Installing the pump 2Attaching the pump cover
□Place the pump (B) in the base (A).
□Position the electrical cord through the groove on the back
of the base (A).
□Assemble the pump cover (D) to the fountain back.
□Close the pump cover (D).
B
A
D

6
Assembly (continued)
3 Connecting the top on the base
and the hose to the pump 4Adding water
NOTE: Two people are required in order to complete this
step.
□Connect the hose from the top (C) to the pump (B) outlet.
□Carefully lower the top (C) onto the base (A).
□Position the top (C) on the base (A).
NOTE: Ensure the hose is not pinched or crimped when the
top (C) is placed on the base (A).
□Add water to the base (A). Fill within 1-2 inches below the
rim of the base (A).
NOTE: As you are filling the base (A), check for leaks and be
careful not to overfill.
A
C
B
A

7 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Operation
1Turning on the pump
□Plug the electrical cord of the pump (B) into a power outlet.
□After a few moments, water starts to flow.
NOTE: You must use a GFCI outlet.
Maintenance
□To reduce the risk of electrical shock, always disconnect the power supply before working with the fountain.
□Do not run the pump without water. Verify the water level frequently to check for evaporation when operating the fountain during the
summer months.
Care and Cleaning
□Store the fountain indoors during the winter.
□Keep the water clean at all times.
□Periodically change the water.
□Clean the fountain water basin with a damp cloth if necessary.
□Clean the pump’s outlet nozzle.
□Ensure the pump hose is free from dirt and debris.
□Make sure the pump is completely immersed in water.

8
Troubleshooting
Problem Possible Cause Solution
No water comes out. The hose is bent or
crushed.
□Disconnect the power supply and check for a bent or crushed hose.
There is not enough water
in the fountain.
□
V
erify the water level in the fountain and add more if it is not adequately filled.
The pump is not working
properly.
□Disconnect and re-connect the power to the pump several times.
The water is not
circulating properly.
□Run the pump for several minutes to give the pump time to get the water
circulating.
The pump is not
completely immersed in
water.
□Ensure the pump is completely immersed in water.
The fountain is not level. □Ensure that the fountain is level.
The water intake hose is
full of debris.
□Check for and remove any debris in the water intake hose.

9 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
This page intentionally left blank

10
This page intentionally left blank

11 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
This page intentionally left blank

Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.