HAMPTON BAY 598-821 User manual

Page 1
INSTRUCTION MANUAL
5 Arm Multicolor Floor Lamp
with CFL Bulbs
Home Depot SKU 598-821
(UPC 798919081240)

Page 2
Thank you for purchasing this Hampton Bay interior
portable luminaire. This product has been manufactured
to the highest standards of safety and quality. The
durable finish and shade design provide for care-free
maintenance.
FEATURES:
1. Five gooseneck arms allow for maximum light
direction. Colorful shades add to the design.
2. Lamp holder may be fitted with a CFL equivalent
energy-saving bulb(s).
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call
our Customer Service Team at 1-877-527-0313 or visit
www.homedepot.com. Please reference your SKU
598-821(UPC 798919081240) 5 Arm Multicolor Floor
Lamp with CFL Bulbs when speaking to a Customer
Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire,
spread all parts out on a clean flat surface. Inspect each
part for defects that may have occurred during shipping.
Be careful when unpacking the lamp since the wires are
connected. If the wires are pulled out of their connectors,
it may result in a bad connection.

Page 3
Important: Inspect the wire insulation for any cuts,
abrasions or exposed copper that may have resulted
during shipping. If there is a defect in the wire, DO NOT
continue the assembly operation. Please call our
Customer Service Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU
HAVE ANY ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of
Purchase.
4. This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician. Never use with an extension cord unless plug
can be fully inserted. Do not alter the plug. CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not
to scale):
1 ea –Base
(A)
4 ea –Pole
(B-E)
1 ea –
Junction
Box (F)
5 ea-Shades
(H)
5 ea –Ring
(I)
5 ea –
13W
CFL
Bulb (K)

Page 5
ASSEMBLY INSTRUCTIONS:
1. Begin assembly at the bottom of the lamp.
2. Insert lamp pole (B) into base (A) and turn
clockwise to tighten.
3. Insert lamp pole (C) into lamp pole (B) and turn
clockwise to tighten.
4. Insert lamp pole (D) into lamp pole (C) and turn
clockwise to tighten.
5. Insert lamp pole (E) into lamp pole (D) and turn
clockwise to tighten.
6. Insert the junction box (F) into lamp pole (E) and
turn clockwise to tighten.
7. Remove socket ring (I) from lamp holder (G)
counter-clockwise.
8. Put lamp shade (H) onto lamp holder (G) and turn
the socket ring (I) clockwise to tighten.
9. Repeat steps 8 and 9 with the other shades.
10. Use with (5) 13-watt maximum E12 Compact
Fluorescent Bulb (K -included) or with (5) 25 watt
maximum E12 incandescent bulbs (not included).