HAMPTON BAY 1LT User manual

Page 1
INSTRUCTION MANUAL
1LT Interior Wall Sconce
The Home Depot SKU 255 751 (UPC 725916822699)

Page 2
Thank you for purchasing this Hampton Bay interior wall sconce. This
product has been manufactured with the highest standards of safety and
quality.
FEATURES:
1. One light interior wall sconce in brushed nickel finish with frosted opal
glass. This sconce has a rotary switch on the fixture to turn the light on/off.
2. This fixture has been engineered to safely use a 60 watt medium base
incandescent light bulb (do not exceed 60 watts) (not included).
3. For energy savings, this fixture has been engineered to safely use a
standard base compact fluorescent light bulb (for equivalent light output,
do not exceed 15 watts) (not included).
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local The Home Depot, please call our Customer
Service Team at 1 877 527 0313 or visit www.homedepot.com. Please
reference your SKU 255 751 or UPC 725916822699.

Page 3
CAUTION:
1. Before starting installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing
the fuse at the fuse box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. If you have any non electrical questions about this fixture, please contact
our Customer Service Team at 1 877 527 0313 or visit
www.homedepot.com. Please reference your SKU 255 751 or UPC
725916822699.
4. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
Light Bulb Safety Goggles Ladder Gloves Wire Strippers
(60 watt maximum)
(or CFL equivalent)
Flathead Screwdriver Phillips Screwdriver Electrical Tape Wire Cutters

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1ea Shade (#4) 1ea Socket Ring (#5)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Unscrew the Socket Ring (#5) from the Socket (#3). Place the Shade (#4)
over the Socket (#3). Screw the Socket Ring (#5) onto the Socket (#3) to
secure the Shade (#4).
3. Install a 60 watt medium base incandescent light Bulb (#6) (not included)
or an equivalent standard base compact fluorescent light bulb (not included)
in the Socket (#3) in the fixture.

Page 5
ASSEMBLY: