HAMPTON BAY PANOLA HDP06659BL User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this light xture. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
PANOLA 1-LIGHT OUTDOOR WALL LANTERN
Item # 1008 480 635
Model # HDP06659BL
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

2
Table of Contents
Safety Information .................................. 2
Warranty .......................................... 2
Pre-Installation ..................................... 3
Planning Installation ............................... 3
Tools Required .................................... 3
Hardware Included................................. 3
Package Contents ................................. 4
Installation .................................... 5, 6, 7
Care and Cleaning .................................. 7
Troubleshooting .................................... 7
Safety Information
□Consult a qualied electrician with any electrical questions
you may have. IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred
during shipping. If there is a defect in the wire, do not
continue the assembly process. Please call our Customer
Service Team at 1-855-HD-HAMPTON.
Warranty
3-YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lighting xture to be free from defects in the materials and workmanship for a period of three (3) years
from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use. If this
product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modications,
alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, assembled,
or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material
or workmanship.
WHAT IS NOT COVERED
This warranty shall not apply to the nish on any portion of the product due to weathering, as this is considered normal wear. The
manufacturer does not warrant and specically disclaims any warranty, whether expressed or implied, other than the warranty contained
herein. The manufacturer specically disclaims any liability and shall not be liable for any consequential or incidental loss or damage,
including but not limited to, any labor or expense costs involved in the replacement or repair of the product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

3 HAMPTONBAY.COM
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that
may have occurred during shipping. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
EE
BB
FF
CC
GG HH
DD
Part Description Quantity
AA Wire nut 3
BB Mounting plate 1
CC Outlet box screw 2
DD Mounting screw 2
EE Ground screw 1
FF Small nut 2
GG Finial 2
HH Rubber washer 2
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: This light xture requires the use of one 120V, 60Hz,
60-watt max., medium-base type A bulb (not included).
Do not exceed the recommended wattage.
Safety
goggles
Phillips
screwdriver
Flathead
screwdriver
Pliers
Silicone or
RTV compound
Wire
strippers
Wire
cutters
Ladder Electrical
tape

4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A
A
Fixture body 1

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
GGHHBB Backplate
CC
BB
5
Installation
1
Removing the mounting plate
□Carefully unpack the xture and lay out all parts on a clean
surface.
Remove the rubber washers (HH) and the mounting plate
(BB) from the backplate by unscrewing two nials (GG).
□
□Turn off the switch at the wall.
Turn the power off at the main fuse box.
Attach the mounting plate (BB) to the outlet box using the
outlet box screws (CC).
□
□
2
Installing the mounting plate
DANGER: Ensure the power is off at the main fuse box
prior to beginning installation.