HAMPTON BAY GFM00471A-CPY User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this canopy. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
10 X 10FT PERGOLA REPLACEMENT CANOPY
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 0000 000 000
Model # GFM00471A-CPY

2
Warranty
RAEY1 FABRIC WARRANTY
WHAT IS COVERED
We warrant the fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
complete the assembly of this product.
Table of Contents
Table of Contents..........................................................2
Warranty ........................................................................2
What is Covered ......................................................................2
What is Not Covered ................................................................ 2
Pre-Assembly ................................................................2
Planning Assembly ..................................................................2
Package Contents.................................................................... 3
Assembly........................................................................4
Care and Cleaning................................
......................... 5
Safety Information
SAFETY WARNINGS
!
WARNING:
gazebo fabric.
!
WARNING: This application of any foreign substance to the
ineffective.
!
WARNING: This gazebo is made with fabric that meets
proof. The fabric will burn if left continuous contact with any
Safety Information ...................................................................2
Safety Warnings .............................................................................2

PACKAGE CONTENTS
Pre-Assembly (continued)
2
F
F
L1
L1
L1 & L2
D
D
D
L2
DD
F
UNLOCK
Canopy 1 F
Part Description Quantity
Assembly
1Unlock The Plastic Connector
Unlock the plastic connector 1 (L1) and the plastic connector 2 (L2) in unlock position as below.

3
F
K
K
K
K
K
K
K
K
K
BB
BB
L1 & L2
L1
L1
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
2Take Off The Thick Shade Rods
Take off the thin shade rods (D) from the plastic connector 1 (L1) and plastic connector 2 (L2), as gure 1.
Take off the tube covers (K) from the top of the thin shade rods (D), as gure 2.
Take off the tube covers (K) from the end of the thin shade rods (D), as gure 3
Assembly (continued)
D
D
D
F
D
D
D
132
D
C
C
C
C
C
C
C
L2

L2
EE
E
L2
L1 L1
L1
Assembly (continued)
3Take Off The Thin Shade Rods
Loosen the plastic connector 1 (L1) and the plastic connector 2 (L2) from the right and the left
side of the thick shade rod (E), repeat this step for another side.
Pull out the thick shade rods (E) from the canopy (F), as shown below.
4
4 Take Off The Canopy
Take off the canopy (F).
F
F
13
2
F

L2
E
E
E
L2
L1
L1
L1
Assembly (continued)
5Attaching The Thick Shade Rods
Put the new replacement canopy (F) on the assembled structure.
Insert the thick shade rods (E) through the canopy (F), as shown below.
Attach the plastic connector 1 (L1) and the plastic connector 2 (L2) to the right and the left side of
the thick shade rod (E), repeat this step for another side.
5
F
F
132

K
K
K
K
K
K
K
K
L1
L1
Assembly (continued)
6Attaching The Thick Shade Rods
Insert the thin shade rods (D) through the plastic connector 1 (L1) and plastic connector 2 (L2), as gure 1.
Connect the tube covers (K) to the top of the thin shade rods (D), align the holes and secure the thin shade rods (D)
using M6x55 combination bolts (BB), as gure 2.
Place the tube covers (K) to the end of the thin shade rods (D), align the holes and secure the thin
shade rods (D) using M6x55 combination bolts (BB), as gure 3.
6
F
F
1
32
D
D
D
D
D
D
D
C
C
C
CC
C
C
L2
BB
BB
L1 & L2

Assembly (continued)
7Completing The Assembly
Ensure all connections are secure before use.
To adjust the length of the canopy (F), keep the plastic connectors 1 (L1) and the plastic connectors 2 (L2) in
unlock position. The length of the canopy (F) cannot be adjusted when the plastic connectors 1 (L1) and the plastic
connectors 2 (L2) in lock position.
7
L1
L1
L1
L1
L1
L1
F
F
F
F
F
DD
D
DD
D
D
D
D
D
D
DD
D
L2
L2
L2
L1 & L2
L1 & L2
UNLOCK
LOCK
Care and Cleaning
Do not clean with abrasive materials, bleach, or solvents.
Store the canopy in a dry, sheltered place when not in use.
d.
For best results, clean thecanopy with a damp cloth, and drythe frames thoroughly. Thiswill help prevent mildew by removing dirt
particles that may accumulate.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory ID# FRS50006R