1. Press the MENU button to enter the OSD main menus.
2. Use the channel buttons on the control panel to select the " TV " menu.
3. Press the volume buttons to enter the " TV " menu.
4. Press the channel buttons to select " AUTO SCAN ".The current setting is shown in brackets.
5. Press the volume button to enable auto scanning.
6. Your television will begin automatically memorizing the available channels.
LT11-23U1 23" Liquid Crystal Display TV
Watching Broadcast or Cable TV
Selecting A/V Sources
Auto Channel Setup
Quick Start Guide
Front ViewFront View Rear ViewRear View
Copyright 2004, Hannspree California, Inc. All rights reserved.
Making Connections
Connecting the Power Adapter
Note : For information on connecting your
TV to a computer, refer to the user's
manual.
1. Connect the power cord to the power
adapter as illustrated.
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
Connecting to Antenna/Cable TV/ PC
A/V and Channel Setup
MAD-001147
Volume
Adjust
Channel
Select
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
2. Press SOURCE key on the control panel to
select different source signals.
The TV/CATV channel number, PC or AV1 ~ AV4
appears on the screen.
Auto Scan
TV
MENU : CLOSE: SELECT : ADJUST
CATV
STEREO
OFF
ADD
TV / CATV
MTS
AUTO SCAN
CH . ADD/ERASE
RETURN
FAV. CHANNEL
This guide is designed as a reference to help you start using your LCD TV quickly.Please refer to the User's Manual for more detailed installation and safety instructions.
Menu
Power
Speaker
Earphone line out
AV4
TV
(source)
Mute MUTE
DC-IN
AV1
LINE IN
DVI-D LINE OUT AV2 AV3
ANTENNA/CABLE TV
LINE IN
DVI LINE-IN
R L R L R L V SYPRPB
LINE-OUT AV 1 AV 2
R L V ANT DC-IN
AV 3
DVI LINE-IN
R L R L R L V SYPRPB
LINE-OUT AV 1 AV 2
R L V ANT DC-IN
AV 3
ANT Jack
(VHF/UHF
IN Jack)
Antenna/CATV
coaxial cable
Antenna
AV3
AV
connector Video
connector
VCR
VCD
DVD
L VIDEOR
DVI LINE-IN
R L R L R L V SYPRPB
LINE-OUT AV1 AV2
R L V ANT DC-IN
AV3
DC-IN
Power cord
Power outlet
AV1
AV3
PC
AV4
AV2
TV/CATV
MUTE
1. After you have made the appropriate power and source connections, press
the power button to turn on your television
2. Press the TV button to select TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
4. Use the CH or button to select the " TV ".
5. Press the VOL or button to enter " TV MENU ".
6. Use the CH or button to select " TV/CATV ".
7. Press the VOL or button to select TV (broadcast TV) or CATV (cable TV).
