Hanover ISLAEGG-BRN User manual

GCS09101A
7
Outdoor Furniture
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE DO NOT RETURN TO THE RETAILER/STORE
from where you purchased the product.
Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300
Between 8:00 AM and 5:00 PM PST, Monday through Friday
To expedite any future warranty claims, please retain the instruction sheet, warranty card
and receipt for future use.
Care and Maintenance
Store furniture in an upright position. Be careful to never allow water to build up in the frames as this will
cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and
water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a
liquid wax for maximum protection against UV rays and/or salty, damp air. If your set includes cushions,
slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean
water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or
damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer
to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the
warranty.
6/1/2015 (a)

GCS09101A
8
Outdoor Furniture
1-Year Limited Warranty Program
For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this
Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original
purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the
date of original purchase for future warranty.
The Manufacturer or its authorized dealer can accept or reject warranty claims based on its findings. This warranty applies in normal
residential use only and is not intended for commercial use. The Manufacturer can make substitutions as required of materials, components,
and sub-components of comparable value and utility. This warranty is limited to product repair or replacement (to be determined solely by the
Manufacturer). Warranty return is limited to only the single affected component.
This limited warranty covers only manufacturing defects and does not cover normal wear and tear, damage due to acts of nature (such as, but
not limited to freezing or high winds), abuse or misuse, including chemical damage from suntan oil or other chemicals, exposure to extreme
heat or cold, abrasion or excessive weight. This product is intended to be used in standard installations only. This warranty is void if the
product is not used for its intended purpose. The Manufacturer disclaims liability for any aspect of installation and any inconvenience caused
by a defective part of a component.
Certain items are not covered by this warranty. These include, but are not limited to the following:
1. Components subjected to abuse, including abuse intended to simulate failure.
2. Damages caused by retailer, shipper or installation crew (such as scratches, dents, tears, chips, etc.).
3. Any part which merely exhibits normal wear yet functions essentially as new, including chips, scratches or stretching of materials and
stitching.
4. Tears, punctures, scratches or any damage caused by improper installation or use.
5. Damage to frames/welds resulting from improper assembly or exposure to water and/or sub-freezing temperatures is not covered.
General frame rusting is not covered.
6. Fading and/or discoloration of fabrics/cushions/straps/wicker resulting from exposure to the elements, chemicals, oils, fluids or any
other cause are not covered.
7. Umbrella bases are not covered under any circumstances.
8. Items sold “as is” or floor models.
To make a claim, call the toll-free number below. Please have available a copy of the original sales receipt along with a brief description of the
problem. Please also provide your email address and daytime telephone or cell phone number. All items may be charged actual freight costs
plus $15 for handling. Repairs or replacement will be made at the Manufacturer’s option. Sales and use taxes, plus shipping and handling
charges are the responsibility of the consumer.
THIS IS THE ENTIRE EXCLUSIVE EXPRESS LIMITED LIABILITY. THE MANUFACTURER NEITHER MAKES NOR IS RESPONSIBLE FOR ANY OTHER WARRANTIES,
EITHER EXPRESS OR IMPLIED, INCLUDING THOSE OF RETAILING DEALERS. THIS EXCLUSIVE REMEDY IS LIMITED TO RECEIPT OF A CREDIT IN CONNECTION WITH
THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR COMPONENT DEEMED TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS AS STATED IN THIS
WARRANTY. NEITHER THE PRODUCT MANUFACTURER NOR ITS AGENTS SHALL BE LIABLE IN ANY CASE FOR INCIDENTAL, INDIRECT, SPECIAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY OR NEGLIGENCE EVEN IF IT
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS OTHERWISE MAY BE REQUIRED BY LAW, THERE ARE NO OTHER EXPRESS OR IMPLIED
WARRANTIES OTHER THAN THE WARRANTY DESCRIBED HEREIN, AND ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED.
Contact Customer Service at 1-866-988-3300
7/28/2018

Assembly Instructions
GCS09101A
Steel/Wicker Egg Swing Chair
Weight Limit: 250 lbs
Questions, problems, or missing parts?
Before returning to the store, call Customer Service.
866-988-3300
8 a.m. -5 p.m., PST Monday - Friday
Retain this manual for future use.

GCS09101A
1
Table Parts & Tools
PART
QTY
PICTURE & DESCRIPTION
PART
QTY
PICTURE & DESCRIPTION
A
1
Base part 1
AA
1
M8 *60mm bolt with
washer& nut
B
1
Base part 2
BB
4
M8*30mm bolt with
washer& nut
C
2
Base part 3
CC
4
M8*25mm bolt with
washer& nut
D
1
Upright pole
DD
2
M8*20mm bolt with washer
E
1
Bent tube
EE
6
M6*40mm bolt with
washer& nut
F
1
Basket 1
FF
2
M6*15mm bolt with washer
G
1
Basket 2
GG
1
hook
H
1
Cushion
HH
2
Silencing buckle
II
1
Alllen wrench

GCS09101A
2
JJ
1
Wrench
WARNING: To avoid damaging this product,
assemble it on a soft, non-abrasive surface
such as carpet or cardboard.

GCS09101A
3
Table Assembly
Step 1:
Connect the base part 1(A) and base part
2(B) with M8*25mm bolt with washer& nut
(CC).
Step 2:
Insert the base part 3 (C) into base part
1(A) and base part 2(B), tighten with
M6*15mm bolt with washer (FF).

GCS09101A
4
Step 3:
Attach the upright pole (D) to the base
with M8*20mm bolt with washer (DD) and
M8*30mm bolt with washer & nut (BB) as
shown.
Step 4:
Insert upright pole (D) into bent tube (E).
Tighten with M8 *60mm bolt with washer&
nut (AA).
Roll to insert the silencing buckle (HH) into
the ring as shown.

GCS09101A
5
Step 5:
Connect the basket 1(F) and basket 2(G)
with M6*40mm bolt with washer& nut (EE).
Roll to insert the silencing buckle into the
ring as shown.
Step 6:
Connect the basket and the bent tube (E)
with hook (GG).
Screw to close the hook (GG).

GCS09101A
6
Step 7:
Attach the band to the base, tighten all
the bolts and make sure it is stable.
Assembly is completed.