HAOZEE TH06 User manual

Wi-Fi Temperature & Humidity Sensor with Screen
USER MANUAL
Model: TH06

Thanks for choosing our product !
You can real-time monitor the temperature and humidity on the screen directly.
Please kindly read the user manual carefully before usage and keep it for future
reference.
Product Presentation:
Specification
Size: 65*65*17mm
Micro Input: DC 5V/1A
LED Indicator: Blue
Wi-Fi Protocol: 2.4GHz
Wi-Fi Standard: IEEE 802.11 b/g/n
Temperature Measure Range: 0-60°C
Temperature Accuracy：±1 °C
Humidity Measure Range：0% RH~99% RH
Humidity Accuracy：±5% RH

Check list before using the device:
a. Your smartphone has connected to a 2.4GHz Wi-Fi network
b. You have input the correct Wi-Fi password.
c. Your smartphone must be Android 4.4 + or iOS 8.0 +.
d. Your Wi-Fi router is MAC-open
e. If the numbers of devices connected to Wi-Fi router reach the limit, you can try
to disable a device to cavate the channel or try with another Wi-Fi router.
How to set up:
1. Use your smartphone to scan QR code, or search “Smart Life” app in Google
Play Store or APP Store to download and install.
QR Code Smart Life
2. Create an account with your mobile number and authentication code.

3. Connect your mobile to your Wi-Fi router ,supply power to the sensor with the
supplied Microcharging cable, click “+” in the upper right corner of
homepage or click “Add Device” .
3. 1) Turn on the bluetooth in mobile:The app will advise you to turn on bluetooth
in your mobile, then you choose the device to add. Enter into your Wi-Fi name and
Wi-Fi password, it will connect the Wi-Fi network automatically.

2) Do not turn on the bluetooth:
Select ”Temperature and Humidity Sensor(Wi-Fi)” from “Sensors”, enter into the
Wi-Fi password,make sure LED indicator is blinking rapidly, if not,please open the
stand at the back, hold the reset button for about 5s till LED indicator blink rapidly.
it will connect.

3) If your Wi-Fi router open both 2.4GHz and 5GHz with the same name, enter
Wi-Fi password, please select “AP Mode”, hold the reset button for about 5
seconds till LED indicator blink slowly, connect your mobile to device’s hotspot:
“SmartLife-XXXX” ,then click to return to App interface,it will connect to Wi-Fi
automatically,configuration complete.