HARDELL HDRT2260 User manual

1
Cordless Rotary Tool
Operator's Manual
Thank you for purchasing this product. To ensure proper
use and trouble-free operation, please read this guide
carefully before operating.If there is any issue,
please contact us via Amazon or email:
[e-mail],we will help you within 12
hours.

2
Components
1. Chuck --2.4mm
2. Spindle Locking Button (DON'T press it when
the device is running)
3. Speed Indicator (5000/10000/15000rpm)
4. USB Charging Port
5. Heat Dissipation Holes( Dissipate the heat
produced by the motor operation)
6. Speed Button(3-level
rate,Low/Middle/High Speed )
Specification
INPUT: 5V
No Load Speed: 5000-15000/min
Speed Settings: 3
Collect Size: φ2.4mm
Charge time: 0.5 hours (Fully charged, the
indicator light lights up）
Weight: 0.3kg
Try not to use it until it is completely dead and cannot be recharged,
especially if it's out of charge, still press the power button, it may
happens battery dead.
Please full charge the main device before using
Product Descriptions

3
NOTE: The product contains a 2.4 mm collet
Package Includes

4
1. Press down the spindle locking
button and unscrew the nut
2. Choose the suitable collet
and put the black nut
3. Insert the bits you need, hold the
lock button and screw on the nut
tightly.
4. Release the spindle locking
button.
ATTENTION: Different accessories fit different collets, If the accessories
come off easily, please replace another suitable collet.
How to fit a sanding band
1.Align the sanding drum and band
2.Press the band into the drum and twist the top of
the drums crew to adjust the tightness
How to fit the cutting disc
1. Twist off the top of the
wheel mandrel
2. Put the cutting disc on the
top of the wheel mandrel
(close to circle)
3. Twist the top of the slim
end into the mandrel
How to Use

5
Function
Types of Artworks for Creation
Sanding
Suitable for sanding work on Softwood/ Aluminum/
Plastic/ Brass/ Stone/ Shell/ Ceramic etc.
Grinding
Suitable for grinding work on Aluminum/ Steel/
Brass/ Stone/ Shell/ Ceramic etc.
Engraving /
Carving
Expertise in engraving on Glass/ Soft Wood/
Aluminum/ Plastic/ Brass/ Stone /Shell/ Ceramic
etc.
Drilling
Suitable for drilling on Softwood/ Aluminum/
Plastic / Shell/ Jadeite/ Agate/ Jade etc.
Polishing /
Cleaning
Suitable for polishing on Glass/ Soft Wood/
Aluminum/ Plastic/ Brass/ Stone/ Shell/ Ceramic
etc.
ATTENTION: Not for Heavy-duty Projects !!!
Widely Application

6
1. Keep this product away from children.
2. Keep this product away from water.
3. Do not touch it with wet hands.
4. Do not place the product on hot surfaces, near hot surfaces, or
an open fire.
5. Do not dismantle the appliance under any circumstances.
6. Do not hold the work by hand or against your body and may lead to
loss of control.
7. Do not force tool.
8. Do not use tools if the switch does not turn that on or off.
9. Maintain tools with care. Keep cutting tools sharp and clean.
10. Check for misalignment or binding of moving parts, breakage of
parts.
11. Use only accessories that are recommended by the manufacturer for
your model.
12. Use this power tool and accessories following the instructions.
The product supports a 1-year warranty from the date of purchase.
This warranty does not apply to products that have been lost, altered,
broken, or damaged by misuse or failure to follow the instruction
provided with the product. Never try to repair the product by yourself.
For any inquiries concerning our products, please contact our
after-sales team via [e-mail], we are free to
help you solve your problem anytime.
Safety Instructions
Warranty