Harman Kardon DVD 37 Instruction Manual

郩˙∂ç∫å
To Y (green)/
Pb (blue)/
Pr (red)
component
video
connectors
To S-video
input
connectors
To coaxial
digital
audio
input
connectors
To optical
digital
audio
input
connectors
To analog audio
input connectors
(red/white)
on the TV
or receiver
(see above)
To 6-channel
analog audio
inputs on
receiver
To video
input
connectors
(yellow) To power outlet
(AC 120V/60Hz)
Dolby Digital/DTS A/V Receiver or Processor
Front Speakers
(Left/Right)
Surround Speakers
(Left/Right)
Center
Speaker
Subwoofer HDMI, DVI, Component,
S-video and/or
Composite video
monitor outputs TV
To
HDMI
or DVI
port
AC INPUT
120V~, 60Hz
13W
DVD 37 CONNECTION GUIDE 2
Connecting to a Receiver
When using the DVD 37 with an audio/video receiver or processor, connect it as follows.
First, make one of the video connections (Composite Video ç,S-Video ∂,
Component Video éor HDMI ˙) to the video input jacks on the A/V receiver, and then
connect the receiver’s video monitor output to the TV.If you will sometimes use theTV
without the audio component, you may optionally make the Analog Audio Connection ∫
to the TV. In addition, to benefit from the high-resolution surround sound formats recorded
on DVD-Audio discs, which are not output via the HDMI connection, you will need to make
the 6-Channel Audio Connection åto your receiver or processor.
Second, if your receiver or processor is not HDMI-capable, make either the Optical Digital
Audio Connection ©or the Coaxial Digital Audio Connection ƒ, to the receiver
or processor.
Remember that when the HDMI connection is used with a receiver or processor that is
compliant with the HDMI format, a single connection suffices for both audio and video,
except for DVD-Audio discs,as noted.
If your receiver or processor is not capable of processing the HDMI audio signal, then a
separate audio connection is required.
If your receiver/
processor has multiroom capability, you may also connect the DVD 37’s
analog audio outputs to the DVD analog audio inputs on the receiver.
IMPORTANT NOTE: Make certain that any device being connected, including the DVD 37,
your receiver or processor and your TV or video display, is turned off whenever you make
connections between products.