Harman Kardon Sena SRL-MESH User manual

QUICK START GUIDE ENGLISH / 1.2.0
MOTORCYCLE MESH & BLUETOOTH®
COMMUNICATION SYSTEM FOR SHOEI HELMETS

Sena Technologies Co., Ltd.
Customer Support: sena.com
Downloadable Sena Software
Download the Sena Motorcycles App on Google Play Store or
App Store.
Sena Motorcycles
• Device Configuration Setting
Download the following items at sena.com.
Sena Device Manager
• Firmware upgrade
• Device configuration setting
Quick Start Guide,
User’s Guide
Follow us on Facebook, YouTube, Twitter and Instagram to check
the latest information and helpful tips.

Product Details
Button Module (L) Button Module (R)
Speaker
Antenna
Antenna
Speaker
Microphone Connector
Status LED
Center Button Mesh Intercom Button
(-) Button
(+) Button
Charging LED DC Power Charging &
Firmware Upgrade Port
Pinhole Fault Reset Button
Bluetooth Module

Installation
The following SHOEI helmets are compatible with the SRL-Mesh.
• GT-Air II, J-Cruise II, Neotec II*
* Neotec II’s manufactured on and after March 8, 2019.
• For more information about installation, refer to the User’s Guide.
Flip Up Helmet Installation
1
1
2
2
3 4
5 6

7 8
9 10
11 12

13 14
15 16
17

Full Face Helmet Installation
1 2
3 4
5 6

7 8
9 10
11 12

13 14
15

Icon Legend
1x
TAP Tap button the specified
number of times 3s
HOLD Press and Hold button for the
specified amount of time
“Hello” Audible prompt
Basic Operations
Powering On
1s
HOLD
Volume Up
1x
TAP
Powering Off
1x
TAP
Volume Down
1x
TAP
Checking the Battery Level
Powering On
=
=
=

Phone Pairing
① 10s
HOLD “Configuration menu”
② 1x
TAP
Blinking
“Phone pairing”
③ Select SRL-Mesh in the list of
Bluetooth devices detected.
Device B
Pi
Bluetooth
SRL-Mesh
• The headset will enter the Phone Pairing mode automatically
when you initially turn on the headset.
• For more information on phone pairing, refer to the User’s Guide.

Using the Phone
Answer a Call
1x
TAP
Reject a Call
2s
HOLD
End a Call
2s
HOLD
Siri and Google Assistant
Activate the Siri or Google Assistant Installed on Your Phone
“Hey Google”
or “Hey Siri” or 3s
HOLD
Music Control
Play/Pause
1s
HOLD
Track Forward
1s
HOLD
Track Backward
1s
HOLD

Mesh Intercom™
Open Mesh™: communication within the same channel.
Group Mesh™: communication within the same private group.
• For more information on Mesh Intercom, refer to the User’s Guide.
Mesh Intercom On
1x
TAP
Blinking
“Mesh intercom on,
Open Mesh, channel 1”
Mesh Intercom Off
1x
TAP “Mesh intercom off”
Note: When Mesh Intercom is on, the SRL-Mesh will automatically
connect to nearby SRL-Mesh users and the headset will be in
Open Mesh (default: channel 1) initially.

Open Mesh
Channel Setting (Default: channel 1) in Open Mesh
① Enter into the Channel Setting.
2x
TAP “Channel setting, 1”
② Navigate between channels.
(1 2 ••• 8 9 Exit 1 •••)
1x
TAP
or
1x
TAP
“#”
③ Save the channel.
1x
TAP “Channel is set,
channel #”
Note: You can use the Sena Motorcycles App to change the
channel.

Group Mesh
Group Mesh is a closed group intercom function that allows users to
join, leave, or rejoin a group intercom conversation without pairing
each headset.
1) Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
Open Mesh Group Mesh
You
B
C
You BC
① Users (You, B, and C) enter into Mesh Grouping to create a
Group Mesh.
5s
HOLD “Mesh grouping”
② When Mesh Grouping is completed, the users (You, B and C) will
hear a voice prompt on their headsets as Open Mesh switches to
Group Mesh.
You BC
“Group Mesh”

2) Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new
users (one or more) in Open Mesh to join the Existing Group Mesh.
Existing
Group Mesh Open Mesh Existing Group Mesh
F
D
You
B
C
You
D
B
F
C
① One (You) of the current users in the Existing Group Mesh and
new users (D and F) in Open Mesh enter into Mesh Grouping to
join the Existing Group Mesh.
5s
HOLD “Mesh grouping”
② When Mesh Grouping is completed, the new users (D and F) will
hear a voice prompt on their headsets as Open Mesh switches to
Group Mesh.
DF
“Group Mesh”

Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a
Mesh Intercom.
1s
HOLD “Mic on” or “Mic off”
Mesh Reach-Out Request
You (caller) can send a request message to turn on the Mesh Intercom
to nearby friends who have it turned off.
① If you want to send or receive a request massage, you need to
enable Mesh Reach-Out on the Sena Motorcycles App.
② While your headset’s Mesh Intercom is on, you (caller) send a
request message using the headset’s Button or the Sena
Motorcycles App.
[Caller]
3x
TAP
[Caller]
“Mesh reach-out request”
[Nearby Friends]
“Mesh intercom
requested”
③ Friends who receive the request message need to manually turn
on their Mesh Intercom using the headset’s Button or the Sena
Motorcycles App.

Reset Mesh
If the headset in an Open Mesh or Group Mesh resets the Mesh, it
will automatically return to Open Mesh (default: channel 1).
8s
HOLD “Reset Mesh”
Bluetooth Intercom
Up to three other people can be paired with the headset for
Bluetooth intercom conversations.
A
B
C
D
YOU
Intercom Pairing
There are two ways to pair the headset.

Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the Sena Motorcycles
App without remembering the button operation.
① Pair the mobile phone with the headset.
② Open the Sena Motorcycles App and tap
(Smart Intercom
Pairing Menu).
③ Scan the QR code displayed on your friend (B)’s mobile phone.
• Your friend (B) can display the QR code on the mobile phone by
tapping > QR code ( ) on the Sena Motorcycles App.
④ Tap Save and check that your friend (B) is paired with you (A)
correctly.
⑤ Tap Scan ( ) and repeat steps 3-4 to pair with Intercom Friends
(C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with
Sena products that use Bluetooth 3.0 or below.

Using the Button
AB
YOU
① Users (You, B) enter into Intercom Pairing.
5s
HOLD
Blinking
“Intercom pairing”
② The two headsets (A and
B) will be automatically
paired.
Turns blue
AB
YOU
③ Repeat the steps above to pair with other headsets (C and D).
Last-Come, First-Served
If the headset has multiple paired headsets for intercom conversations,
the last paired headset is set as the First Intercom Friend.
Intercom Pairing Order Last-Come, First-Served
A
B
C
D
YOU
1
2
3
ADCB
YOU Intercom
Friend 1
Intercom
Friend 2
Intercom
Friend 3