Harman JBL Wind 2 User manual

Owner´s manual
2
Manual do proprietário
Manual del propiet a rio
Руководство пользователя Руководство пользователя Руководство пользователя Руководство пользователя
Руководство пользователя

2
Product Overview
Congratulations for purchase of WIND 2! To ensure a proper use of WIND
please read this manual before you start to use. Also, please safely keep
this manual for future reference and trouble shooting.
Package Contents
1. 1x WIND 2
2. 1x USB charging cable
3. 1x Aux cable
4. 1x Carabiner
5. 1x Bracket
6.
1x User's manual
7.
1x Rubber mount
Compatibility
The product is compatible with BT enabled devices, including I phone,
I Pad, I Pod, Android Phone, tablets and etc. It is also compatible with
devices which have 3.5mm earphone jack to connect to the product.
Features
• Wireless and To-Go
Easy connection with your electronic devices wirelessly and use it portably.
The wireless working range is around 8-10 meters (30 feet), no cords and
no hassle.
• Hand free calling on-the-go
With a built-in microphone, the unit takes on your calls just free and easy.
• 2-in-1 design for use in bicycle and backpack

3
(1) Handle for hanging a carabiner
(2) Play/pause (BT, aux and micro SD / TF), FM Scan and Mute (Radio)
(3) Volume + ( Long press ) - All functions
(4) Volume –( Long press ) - All functions
(5) "ON / OFF" and "Source" button (BT, aux, micro SD TF and radio)
(6) Connection for USB charging
(7) Headphone output
(8) Micro SD / TF Card
(9) AUX input
(10) LED battery charge indicator
•
Carabiner and bicycle bar mounter with bracket are provided for two uses
in carrying it over.
Product Interface
Next (Short press) - BT, micro SD / TF and radio functions
Lap (Short press) - BT, micro SD / TF and radio functions
Bluetooth connection LED indicator
(11)
1
2
3
4
5
6
7
8
9
10
11
12 13
Microphone
(12)
Display
(13)

4
Getting Started
Two easy steps to get your JBL WIND 2 ready to enjoy.
Step 1: Charging before use
Connect your WIND 2 BT Speaker to a USB power source
using the enclosed
USB charging cable.
Step 2: Connecting to play
•
Bluetooth connection
• Direct Connection
As soon as the portable WIND 2 box is turned on, the BT indicator will blink and
signal to confirm that the unit is currently in BT pairing mode. Access the BT
settings on your phone, tablet or computer to locate the device called "JBL
WIND 2" and press to select. A signal will be issued to confirm that the device
has been satisfactorily paired in seconds. The next time you use the WIND 2
device, the product will automatically connect to your devices once pairing
has been performed. To disconnect the device, press the "Play / Pause"
button for 5 seconds and it will start pairing a new available device.
OBS.: This process needs to be performed only on first use.
region as soon as your radio is ready for use.
press the "Play / Pause" button up to start scanning th FM radios of your
When you turn on your JBL WIND 2 for the first time, after playing the radio,
Click the "+" and "-" buttons to advance and return the radios respectively.
beep, it will start playing the FM radio.
As soon as WIND 2 is turned on, press the source select button again, after the
• FM Radio connection
The WIND 2 Portable Box can also connect to devices that have a handset
output or a line-out using the AUX cable shipped with the device.
• Micro SD / TF card
Play your music through a micro SD / TF card. Click the "source" button to
switch between signal inputs.

5
Speaker Phone
After paired your mobile phone to WIND 2 with BT, the speaker phone function
can be used.
• Make call: Call will automatically transfer to the speakerphone. If not, tap
play/pause button;
• Answer call: Tap play/pause button to answer the incoming call;
• End call: Tap play/pause button during the call to end the call;
• Reject call: Hold play/pause button to reject the incoming call;
• Redial last number: Double tap play/pause button to redial last number
when it is not in a call.
Charge
When the power is low, a beep will comes out from the speaker, please charge
the speaker when you hear the beep.
1. Connect the standard USB end of the supplied USB cable to a USB power
source (like PC, USB power adapter…etc.);
2. Connect the Micro USB jack to the USB charging port in the unit. The charging
indicator will light up while charging;
3. It will take about 2 hours to fully charge the BT speaker;
4. The LED indicator will stay on while charging, and goes off after fully charged.
Note: if the unit is not used longer than 7 days, please charge the unit
for 10 minutes before turn on the unit.
Connection
Laptop / notebook / PC
As the BT versions for these types of devices vary greatly, the connection methods
will differ as well. If you cannot connect with the WIND 2 BT Speaker using the previous
method instructed, you may need to install a new version of the BT driver.
Please refer the instructions of device for details.

6
Technical parameters
Note: All specifications are subject to change without notice.
Product name: Wind 2
Power Supply: USB 5V, 1A
Built-in Lithium Ion battery: 3.7V
73
0mAh
Output power: 5W RMS
BT Profile Supported: A2DP, AVRCP
BT Version: 4.2
Working range: up to 10m
Working atmosphere: 0°C 40°C / 20% 90% RH
Memory card capacity: 64GB
SPL Max: 80dB
IPX7 (OBS.: To ensure that JBLWIND2 is waterproof, please remove
all cable connections and tightly close the cap; exposing the
JBLWIND2 to liquids without doing so may result permanent
damage to the
speaker or power source.
IPX7 waterproof is defined as the speaker can be immersed in
water up to 1m for up to 30 minutes.)
Maintenance
Please follow the
instructions below before cleaning the unit:
•
Power off the unit first before clear
•
Use a soft, dry, lint-free cloth to wipe gently
•
Do not use alcohol, benzene, thinners or other chemical detergents as
these can cause the casing to be warped or discolored
Storage
•
If the unit will not be used for an extended period of time, power off the
unit and place the unit with accessories into the package
•
Do not set the unit in a damp, high temperature or a sun point-blank
place

7
•
Check for other BT devices around the surroundings that may interfere
with searching and turn
devices off.
•
Power off and then power on the unit to restart the BT function of the unit
or your BT device.
•
Unplug any cables plugged into the AUX IN, restart all devices and then
attempt pairing again.
Issue: Interference or static during playback
Solution:
•
Avoid using the device
between concrete or other
building
structures
that may interfere with the signal.
•
Please check if the battery level of the unit and the BT device
and charge if necessary.
Issue: Radios are not working well.
Solution:
•
Check that the radios have been scanned according to instructions on page 4
Safety Instructions
This product is specially designed based on the full attention to safety; in
order to make sure the accident
f
-
ree operation, please abide by the guidelines
listed below:
•
Always position the unit on a stable and level surface. Unstable surface can
cause the unit to topple and fall, resulting in possible damage or injury;
Solution:
successfully after multiple attemptsIssue: Pairing is un
Troubleshooting
•
Check if the BT indicator light is on. If the indicator light is off, please press
the power button to turn the unit on. If the BT indicator light still doesn't come
on after pressing the power button, please charge the unit.

8
•
Regardless
of what reasons cause the unit
damage, have the repair
performed only by on authorized JBL dealer or service center;
•
If you want to do the cleaning, please turn off the unit and unplug the power
cable from the outlet first;
•
Set the volume properly to prevent injury to the unit and your health;
Correct Disposal of this product. This marking indicates that this product
should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe
recycling.
WARNING:
•
The battery (battery or batteries or battery pack) shall not be exposed to
excessive heat such as sunshine, fire or the like.
•
No naked flame sources, such as lighted candles, should be placed on
the apparatus.
•
Do not drop, unpack, open, beat,curve, prink and burn the unit;
•
Avoid using the unit nearby basins or sinks where it may come in
contact with water;
•
Do not place any ware with full water on the top of the unit, such as vase,
glass, pot, and please avoid placing candle on the speaker surface as well;
•
Protect the using of the unit from any overheating devices (such as radiator,
heating installation, cooking stove or other heating devices);

9
Warning:
WIND 2 is designed as multipurpose speaker which includes common
and casual use on a bicycle as an entertaining device. We are not liable to risk
in using WIND 2 while you ride on a bicycle for speed racing, BMX performance,
down hill riding, jumping and etc. Please always use WIND 2 on a bike in a manner
of safe riding.

10
Descrição Geral do Produto
Parabéns pela compra da caixa portátil WIND 2 para acoplagens
múltiplas. Para garantir o uso adequado do equipamento, leia
cuidadosamente este manual antes de começar a utilizá-lo. Além disso,
guarde bem este manual para uma futura consulta e para solucionar
problemas.
Conteúdo da embalagem
1. 1 x WIND 2
2. 1 x Cabo USB para carregamento
3. 1 x Cabo auxiliar
4. 1 x Mosquetão
5. 1 x Suporte
6. 1 x Manual do usuário
Compatibilidade
O produto é compatível com dispositivos habilitados para conexão sem fio
BT, incluindo iPhone, iPad, iPod, Android Phone, tablets etc. Também é
compatível com dispositivos que têm uma saída de fone de ouvido de
3,5mm(P2) para conectar ao produto e cartões micro SD/TF.
Características
• Wireless e To-Go
Fácil conexão com seus dispositivos eletrônicos sem fio e para uso portátil. A
faixa funcional de alcance sem fio é de aproximadamente 8 a 10 metros
sem cabos e sem complicações.
• Ligação (on-the-go) sem as mãos
Com um microfone integrado, a unidade realiza suas chamadas de forma livre
e fácil.
• Design 2-em-1 para utilizar na bicicleta, moto, mochila e onde mais quiser
São fornecidos um mosquetão e um suporte para múltiplas acoplagens.
7. 1 x Manta borracha