Harmony HDH-1117 User manual

A SWITCH (B)
B SWITCH (A)
C COOLAIR SWITCH
D CONCENTRATOR
E BACK COVER
F DIFFUSER
G CORD
Model: HDH-1117
HAIR DRYER
INSTRUCTION MANUAL

TECHNICAL DATA:
Power: 230V, 50Hz
Capacity: 2000W
NOTICE:
·Do not switch on before checking that voltage on the specification
plate is the same as that in your home.
·Switch off when not in use, even for a moment.
·If the supply cord is damaged, it must be replaced by the
manufacturer, his service agent or a similarly qualified
person, in order to avoid hazard.
·For additional protection, the installation of a residual
current device with a rated residual operating current not exceeding
30 mA is advisable in the electrical circuit supplying the bathroom.
Ask your installer for advice.
·Never wet or submerge the dryer in water.
·WARNING：When the hairdryer is used in a bathroom, unplug
it after use, since the proximity of water presents a hazard, even
when the hairdryer is switched off.
HOW TO USE
·Make sure that your hands are completely dry before plugging in.
·Plug in and set switch ( A）to the required position. Setting 1: gentle
air flow, setting 2: strong air flow.
·Once the curl is styled, switch to the cool phase for 15-20 seconds,
to give more body to you style and make it longer-lasting.
Once your hair is dry, set the switch ( A）off and
unplug the dryer.
USING THE CONCENTRATOR（D）
·The adjustable air concentrator（D）allows you todirect airflow to a
particular point.
·This attachment is recommended for drying or styling local areas,
particularly when using a brush or rollers.
COOL PHASE
·If you style your hair with a brush, start with hot air, rolling the lock
and heating the curl.
·For cool air, hold key（C）down. Styling is more effective
with the air concentrator（D）.
·The cool air setting（C）reduces the temperature consider-
ably and allows the hair to cool rapidly following warm setting.
SAFETY
·Ensure that the air inputs and outputs are not blocked.
·If that does happen, thermal temperature limiter guards
against overheating.

CLEANING YOUR DRYER
·Always disconnect your dryer before cleaning.
·Do not immerse the appliance in water.
·Clean the dust and hair by brush.
·Clean the appliance with a slightly damp cloth and
dry it up with a dry cloth.
WARNING:
(1) If the supply cord is damaged, it must be replaced by the
manufacturer, his service agent or a similarly qualified
person, in order to avoid hazard.
(2) This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instructions
concerning the use of the appliance by a person
responsible for their safety.
(3) Children should be supervised, to ensure that they do
not play with the appliance.
(4) When the hairdryer is used in a bathroom, unplug it after use,
since the proximity of water presents a hazard even when the
hairdryer is switched off.
(5) For additional protection, the installation of a residual current
device with a rated residual operating current not exceeding 30 mA
is advisable in the electrical circuit supplying the bathroom. Ask your
installer for advice .
(6) Never wet the dryer or submerge it into water.
(7) Do not use this appliance near water, in
bathtubs, basins or other vessels.

NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high
quality materials and components which can be recycled and
reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of separately
from your household waste. Please dispose of this equipment at
your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used
electrical and electronic products. Please help us to conserve the environment
we live in!
DECLARATION OFCONFORMITY
This product complies with the requirements of the directives
EMC-Directive: 2004 / 108 / EC
Low Voltage Directive: 2006 / 95 / EC
declare that the HDH-1117
is in compliance with the following norms:
EN 55014-1:2000+A1 :2001+A2 :2002
EN 55014-2:1997+A1:2001
EN 61000-3-2:2000+A2 :2005
EN 61000-3-3:1995+A1 :2001
EN 60335-2-23:2003
EN 60335-1 :2002+A11,A1 :2004+A12,A2 :2006
EN 50366 :2003+A1 :2006
EXCLUSIVE IMPORTER IN GREECE:
Amiridis – Savvidis S.A.
33, Vas. OlgasAvenue
P.O. 54641, Thessaloniki, Greece
Tel: [phone], Fax: [phone]
45, Posidonos street
P.O. 18344, Moschato, Athens, Greece
Tel: [phone], Fax: [phone]
www.amiridis-savvidis.gr