Hartman Dubai 69020012 User manual

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
Dubai 3 Seat Lounge Sofa, Lounge Chair(x2) and 170 x50cm Casual Table
( 69119012 )
ATTENTION:
1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
3. DO NOT use power tools
4. Please allow 30 minutes for assembly.
5. Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled
LOUNGE CHAIR ASSEMBLY STEPS:
1. Turn the chair (A) upside down on a soft clean surface
2. LOOSELY attach Seating panel (B) to the chair (A) with 4 bolts (F), 2 bolts (G) and 6 big flat washers (H) using Allen key (I)
3. LOOSELY attach legs (C) to Sofa (A) with 6 bolts (G) and 6 big flat washers (H) using Allen key (I) DO NOT TIGHTEN THE BOLTS
AT THIS STAGE
4. Tighten all bolts using Allen key (I) one by one being careful not to over tighten any as this will cause the thread to become damaged
5. Turn Sofa over and place in desired position.
6. Place all cushions (D&E) on the sofa seat
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part no
Parts list
Parts Picture
Description
Q’ty
Part no.
A
chair
1
69020012A
F
M6*35 bolts
4
1111162
G
M6*25 bolts
8
2002173
B
Seating
panel
1
69020012B
H
Big Flat
washers
12
1061162
C
Leg
2
69020012C
I
Allen Key
1
2002191
D
Seat
cushion
1
69020012D
E
Back
cushion
1
69020012E

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
Lounge Chair(x2)
1
2
1
1
2
3

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ATTENTION:
1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
3. DO NOT use power tools
4. Please allow 30 minutes for assembly.
5. Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled
3 SEAT SOFA ASSEMBLY STEPS:
1. Turn the sofa (A) upside down on a soft clean surface
2. LOOSELY attach Seating panel (B) to the Sofa (A) with bolts (H), bolts (I) and big flat washers (K) using Allen key (L)
3. LOOSELY attach 2 legs (C) to Sofa (A) with bolts (I) and big flat washers (K) using Allen key (L) DO NOT TIGHTEN THE BOLTS AT
THIS STAGE
4. LOOSELY attach middle leg (D) to seating panel (B) with bolts (I) and big flat washers (K) using Allen key (L)
5. LOOSELY attach rear middle leg (E) to seating panel (B) with bolts (J) and big flat washers (K) using Allen key (L)
6. Tighten all bolts using Allen key (L) one by one being careful not to over tighten any as this will cause the thread to become damaged
7. Turn Sofa over and place in desired position.
8. Place all cushions(F&G) on the sofa seat
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part no
Parts list
Parts Picture
Description
Q’t
y
Part no.
A
Sofa
1
69119012A
F
Seat
cushion
1
69119012F
G
Back
cushion
3
69119012G
B
Seating
panel
1
69119012B
H
M6*35 bolts
8
1111162
C
Rear Leg
2
69119012C
I
M6*25 bolts
12
2002173
D
Middle leg
1
69119012D
J
M6*15 bolts
2
2100095
E
Rear
middle leg
1
69119012E
K
Big Flat
washers
22
1061162
L
Allen Key
1
2002191

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
Dubai 3 Seat Sofa
2
1

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
3

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ATTENTION:
1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
6. DO NOT use power tools
3. Please allow 30 minutes for assembly.
4. Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled.
170 x 50cm Casual Table ASSEMBLY STEPS:
1. Turn the table top (A) upside down on a soft clean surface
2. LOOSELY attach leg (B) to table top (A) with bolts (E) and big flat washers (F) using Allen key (G) DO NOT TIGHTEN THE BOLTS AT
THIS STAGE
3. LOOSELY attach the ring (C) to legs (B) with bolts (E) and big flat washers (F)using Allen key (G) DO NOT TIGHTEN THE BOLTS AT
THIS STAGE
4. Tighten all bolts using Allen key (G) one by one being careful not to over tighten any as this will cause the thread to become damaged
5. Turn over and place in desired position.
6. Place glass (D) back on table and gently press down on suckers to ensure glass is secure
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part no
Parts list
Parts Picture
Description
Q’ty
Part no.
A
Table top
1
E
M6*25 bolts
12
F
Big Flat
washers
12
B
Leg
4
G
Allen Key
1
C
Ring
1
D
Glass
1

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
170 x50cm Casual Table
1
2

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
3
4

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
Dubai
170x45cm Extra Long Stool (3 Seat Bench)
( 69120012 )
ATTENTION:
1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
3. DO NOT use power tools
4. Please allow 30 minutes for assembly.
5. Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled
ASSEMBLY STEPS:
1. Turn the seating panel (A) upside down on a soft clean surface
2. LOOSELY attach legs (B) to the seating panel (A) with bolts(E), and big flat washers(F) using Allen key(G)
3. LOOSELY attach ring (C) to assembled legs with bolts (E) and big flat washers (F) using Allen key (G) DO NOT TIGHTEN THE
BOLTS AT THIS STAGE
4. Tighten all bolts using Allen key (G) one by one being careful not to over tighten any as this will cause the thread to become damaged
5. Turn Stool over and place in desired position.
6. Place seat cushion(D) on the stool
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part no
Parts list
Parts Picture
Description
Q’ty
Part no.
A
Seating
panel
1
69120012A
E
M6*25 bolts
12
1231162
F
Big Flat
washers
12
1061162
B
Leg
4
69120012B
G
Allen key
1
2002191
C
ring
1
69120012C
D
Seat
cushion
1
69120012D

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
170x45cm Extra Long Stool (3 Seat Bench)
( 69120012 )
1
2
1
1
3
2